Softing IT Networks PS CTK1015 Cable Tracker - Cable Tester content_copy

The Softing PS_CTK1015 is a cable tester from the CableTracker product series, specifically designed for locating and identifying network cables in building cabling systems. The device consists of a signal generator (CT10) and a receiver (CT15), forming a toner and tracing kit. It is used for efficient localization of cables installed in walls, cable ducts, or other non-visible areas, as well as for identifying connections at patch panels or network devices.

Applications
CableTracker is used in IT infrastructure and building cabling to simplify the identification of cables with their endpoints. The device enables location even in complex environments where cables are not directly visible.

Functions and Equipment in Detail
The signal generator (CT10) is connected to the end socket or directly to the cable and transmits a low-frequency signal into the cable. This signal is received via the cable’s radiation, allowing the receiver (CT15) to track the cable’s position. The receiver is highly sensitive and enables precise location, even within walls or cable ducts. Additionally, the signal generator can activate the port LED of an Ethernet hub, switch, or router by blinking, enabling quick identification of the connection. The device features connectors for RJ-45, RJ-11, RJ-12, as well as universal alligator clips, to support various cable types and connection methods.

Technology Explained Simply
The operation is based on transmitting a low-frequency signal through the cable, which is received by the receiver. The signal’s radiation allows tracking of the cable even in non-visible areas. The frequency is chosen to penetrate walls and cable ducts effectively without significant attenuation. Port LED activation is achieved via a specific signal frequency recognized by compatible network devices, causing the LED to blink. This simplifies identifying the cable with a specific port on a switch or hub.

Compatibility and Accessories
The kit is designed for use with Ethernet hubs, switches, and routers that support port LED indicators. Connectors for RJ-45, RJ-11, RJ-12, and alligator clips enable compatibility with a wide range of cable types and connection methods. Accessories include universal alligator clips, an RJ-45 patch cable, and a 9V battery for powering the signal generator. The components are designed to be compatible with common network cables and connection sockets.

Installation and Mounting
Installation involves connecting the signal generator to the cable to be located, for example, at an end socket or directly at the cable end. The receiver is then held near the cable to receive the signal. Location is performed by moving the receiver along the suspected cable path, with the receiver’s volume or display indicating proximity to the cable. Port LED activation occurs automatically once the signal generator is connected and transmitting the signal.

Operational Advantages
Using the CableTracker system significantly reduces the time required for cable location and identification. The high sensitivity of the receiver enables precise location even in complex environments. The port LED activation function simplifies cable-to-port identification on network devices, which is particularly beneficial for large or undocumented networks. The universal connectors increase the device’s flexibility for various application scenarios.