Softing IT Networks LX_AC_CA014,226606
Opferkabel für LinkXpert, CableMaster und NetXpert Serie – Kurzes geschirmtes Kabel mit RJ45 Stecker auf RJ45 Buchse content_copy

This product is a sacrificial cable for the LinkXpert, CableMaster, and NetXpert series devices from Softing IT Networks. It is a short, shielded cable specifically designed for use in network cable and line testing. The term sacrificial cable refers to the fact that it may be damaged or not reused during test procedures, as it is directly connected to the cables or devices under test. The cable features an RJ45 plug at one end and an RJ45 socket at the other, enabling it to serve as a connecting element between the test device and the cable, or between two cables.

Sacrificial cables are commonly used in network cable testing when a direct, mechanical connection between the test device and the cable under test is required. The shielded cable minimizes electromagnetic interference and ensures reliable signal transmission during measurement. The RJ45 plug and socket connection is the standard interface for Ethernet networks and is widely used in IT infrastructure. The use of a short cable reduces the additional length that would need to be accounted for during measurement, thereby increasing the accuracy of the results.

The function of the cable is to support network cable and line testing. It is used to establish a connection between a test device and a cable under test, without requiring additional adapters or extensions. The shielded design ensures that external interference, such as that from electrical devices or other cables, does not affect signal quality during measurement. This is particularly important in precise diagnostic procedures where even minor faults in the line must be detected.

The cable's compatibility is limited to devices from the LinkXpert, CableMaster, and NetXpert series, manufactured by Softing IT Networks. These devices are used for diagnosing and analyzing network cables and lines. The sacrificial cable is directly connected to the test devices to reach the cables under test. It is not intended as accessory for other manufacturers or devices, as the interfaces and requirements are specific to the Softing product line.

Installation and mounting are performed by simply inserting the RJ45 plug into the socket of the test device or the cable under test. No additional tools or mounting aids are required. The cable is designed for direct use and requires no special preparation. It is used within test procedures where a physical connection between device and cable is established.

In operation, the sacrificial cable provides a reliable and precise connection that supports the measurement accuracy of the test devices. The short length minimizes the additional cable length that is included in the measurement, enabling a more accurate analysis of the cables under test. The shielded construction protects the signal from interference, which is particularly beneficial for sensitive measurements. The cable is designed for use in professional environments where high accuracy and reliability are required.