Softing IT Networks 230531
Zubehör Singlemode-Messkabel 2m simplex FC/PC-FC/PC content_copy

This product is a singlemode test cable from Softing IT Networks, designed for precise optical measurements in network infrastructures. It is a 2-meter-long, simplex cable with FC/PC connectors on both ends. Such cables are typically used in optical network analysis to check signal quality, attenuation, or reflections in fiber optic lines. The use of singlemode fibers enables high bandwidth and low attenuation, which is advantageous for measurements over long distances or in high-performance networks.

Singlemode test cable are specifically designed for use with optical measuring devices such as OTDRs (Optical Time Domain Reflectometers) or light power indicators. The FC/PC connector provides a secure, rotationally stable, and dust-protected connection, suitable for professional environments. The PC surface polish ensures a flat, smooth surface at the fiber end, minimizing reflections and optimizing signal transmission. The simplex configuration means the cable contains only one fiber strand, transmitting data in one direction — typical for measurement applications where a single channel is sufficient.

Applications include the installation, maintenance, and diagnosis of fiber optic cable networks in data centers, telecommunications networks, or industrial applications. The cable is often used in combination with measuring devices to check connection quality, for example, during fault finding after installation or when verifying attenuation in an existing network. The 2-meter length provides sufficient flexibility for connecting the measuring device to the section of cable under test, without requiring unnecessarily long cables.

Functions and equipment in detail include the use of singlemode fiber optic cable, designed for high transmission speeds and low signal loss over long distances. FC/PC connectors are standard in the fiber optic industry and enable a secure, repeatable connection. The simplex construction is sufficient here, as test cables are generally not designed for bidirectional data transmission, but only for signal transmission in one direction — from device to cable or vice versa.

The FC connector is a metallic plug with a threaded closure, ensuring a stable mechanical connection. The PC surface polish (Physical Contact) ensures that the fiber end face is flat and cleanly polished, minimizing reflections and signal loss. This technique is particularly important for precise measurements, where even minor reflections can affect results.

Compatibility and accessories refer to use with optical measuring devices that support FC/PC connectors. The cable is designed for professional environments where high measurement accuracy is required.

Installation and mounting are performed by simply inserting the FC/PC connectors into the corresponding sockets of the measuring devices or the cable under test. No special tools or additional components are required, as the connector is mechanically secured by screwing. The connection is designed for repeated mounting and dismounting, which is advantageous for maintenance and diagnostics.

Operational advantages lie in the high measurement accuracy achieved through the use of singlemode fiber and PC surface polish. The robust FC connector ensures a reliable connection, even under industrial conditions. The 2-meter length provides sufficient flexibility for cabling without requiring unnecessarily long cables. The cable is designed for use in professional networks, where high signal quality and reproducibility of measurement results are critical.