Softing IT Networks 230089
Zubehör CAT6A Patch Cord Test Adapter für WireXpert MP 1 Stück content_copy

The CAT6A Patch Cord Test Adapter from Softing IT Networks is a specific accessory for the WireXpert MP network test device. It is used for precise testing of CAT6A patch cables within network configurations and maintenance tasks. The device enables cable testing to analyze line quality, impedance, crosstalk values, and other relevant parameters according to standards for structured cabling. The adapter is designed to meet the requirements of CAT6A cabling systems, which support bandwidths up to 500 MHz and are suitable for high-speed applications such as Gigabit and 10-Gigabit Ethernet.

CAT6A cabling is a standard for structured cabling that ensures high data transfer rates and low signal interference. The test adapter allows direct integration of CAT6A patch cables into the WireXpert MP test environment, ensuring representative and reliable measurement results. Using a specific adapter for this cable type guarantees correct impedance matching and minimizes measurement errors that could arise from incompatible or non-standard connectors.

Functions and equipment in detail

The adapter is designed as a single unit and serves exclusively as an interface between the WireXpert MP test device and the CAT6A patch cable to be tested. It enables cable tests that check the electrical properties of the cable, including insertion loss, NEXT values (Near-End Crosstalk), and return loss. These measurements are essential to verify compliance of the cable with standards such as ISO/IEC 11801 or TIA/EIA-568. The precise design of the adapter ensures a mechanically stable and electrically clean connection, which is necessary for accurate measurement results.

Technology explained simply

The adapter functions as a passive connector and does not require additional power supply or electronic amplification. It consists of a mechanical plug connector that connects to the WireXpert MP and another plug connector that connects to the CAT6A patch cable being tested. The design is intended to maintain the cable's impedance (typically 100 Ohm) to minimize reflections and signal distortion. Using a specific adapter for CAT6A cables is necessary, as these have a different geometric and electrical design compared to lower-class cable types (such as CAT5e or CAT6).

Compatibility and accessories

The adapter is specifically designed for the WireXpert MP test device from Softing IT Networks. It is not suitable for other test devices or cable types. Compatibility with CAT6A patch cables is ensured by the specific design and electrical characteristics of the adapter. There are no additional accessories specifically recommended or required for this adapter. It is used directly in the testing process without additional adapters or converters.

Mounting and installation

Installation is done by simply plugging the adapter into the corresponding port on the WireXpert MP test device. The CAT6A patch cable to be tested is then inserted into the other connector of the adapter. No tools or additional mounting aids are required. The connection is mechanically stable and allows for secure and repeatable testing. Installation is performed on-site without additional preparation.

Advantages in operation

Using the CAT6A Patch Cord Test Adapter ensures high measurement accuracy and reliability when testing network cables. The specific adaptation to the CAT6A standard reduces error sources and enables quick validation of cable quality. This is particularly important in professional environments where network performance and reliability are critical. The simple handling and direct integration into the WireXpert MP system reduce the effort required for maintaining and installing network infrastructures.