Softing IT Networks 228468
Softing FF_AC_CLE_KIT Fiber Werkzeug- und Reinigungskit 228429 content_copy

The Fiber Thermal Stripper from Softing IT Networks is a specialised tool for precise de-insulation of fibre optic cables. It is used to remove the outer protective jacket and the inner protective layer (coating) of fibre optic lines, ensuring a clean and uniform end preparation for subsequent fibre connections or terminations. The device operates thermally, softening the layers through targeted heating and then removing them without damaging the sensitive fibre optic core itself. The application is in fibre optic installation technology, particularly for preparing single-mode and multi-mode fibres for connection techniques.

Functions and equipment in detail
This tool consists of a thermal de-insulator with an integrated heating function. The temperature is regulated to melt or soften the protective layers of the fibre optic without damaging the fibre itself. De-insulation is achieved by mechanically pulling off the softened layers, resulting in a clean and uniform cut surface. The device is designed for use in professional fibre optic installations, where high precision and fibre protection are required. The delivery includes, in addition to the de-insulator, a soft case for safe storage and a cleaning brush for removing fibre residue and contamination after de-insulation.

Technology explained simply
The Fiber Thermal Stripper uses controlled heat generation to soften the polymer coatings of the fibre optic (coating). These layers are typically made of acrylic or silicone resin and become elastic under heat, allowing them to be removed without mechanical stress on the fibre. The heating is designed to affect only the outer layers, while the fibre optic itself remains protected due to its low thermal conductivity and short exposure time. The thermal method reduces the risk of micro-cracks or fibre damage that can occur with mechanical de-insulation methods. The cleaning brush removes fibre particles generated during de-insulation, ensuring a clean working surface for subsequent fibre processing.

Compatibility and accessories
The tool is designed for use with standard fibre optic cables, particularly single-mode and multi-mode fibres used in telecommunications and data transmission. No specific accessories are required, as the device is delivered with the necessary tools (soft case, cleaning brush). The soft case protects against mechanical damage and contamination, extending the tool’s service life. The cleaning brush is specifically designed for removing fibre residue and supports the quality of the end preparation.

Mounting and installation
The mounting of the Fiber Thermal Stripper does not refer to mechanical installation, but to its application. The device is directly applied to the fibre optic cable to be processed. The heating function is activated, and once the required temperature is reached, the protective layer is carefully pulled off. The exact procedure depends on the cable type and the thickness of the protective layers, and it is recommended to follow the instructions for correct handling. The cleaning brush is used after de-insulation to remove particles from the fibre end surface. The soft case serves for storage and protects the device between uses.

Advantages in operation
The use of the Fiber Thermal Stripper provides high precision in de-insulation, improving the quality of fibre end preparation. The thermal method minimises the risk of fibre damage that can occur with mechanical methods. The integrated cleaning brush and soft case increase efficiency and tool protection. The combination of thermal de-insulation and subsequent cleaning results in a clean and reliable preparation of the fibre for subsequent connection techniques, enhancing the overall performance of fibre optic installation. The tool is designed for use in professional environments where reliability and precision are critical.