Softing IT Networks 226101 CM210 CableMaster 210 continuity and wiring tester LCD
|
69,86 EUR |
|
|
( 83,13 EUR incl. VAT ) ≈ £58.26 | ≈ $78.03 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline | |
| In Stock: >25 pieces | |
| Lieske Part No.: | 836895 |
|---|---|
| Mfg Part No: | 226101 |
| UPC/EAN: | 0046382254075 |
| Weight: | 0.5 kg |
| Type: | CM210 |
Further Network Analyzers from Softing IT NetworksFurther products in category Network Analyzers
All products of Softing IT Networks
Product information for Softing IT Networks 226101:
The CableMaster 210 from Softing IT Networks is a compact, handheld continuity and wiring tester for Ethernet cables. It is designed for quick and cost-effective testing of twisted-pair cabling and is particularly suitable for installers and technicians in the field of network infrastructure. The device enables detection of wiring errors such as breaks, short circuits, miswiring, and split-pairs, allowing network faults to be identified early. As a preliminary test before official acceptance testing, the CableMaster 210 is a reliable tool that increases installation efficiency.
Applications
The CableMaster 210 is primarily used in the field of network infrastructure, especially for the installation and maintenance of Ethernet cabling. It is suitable for testing cables in office buildings, industrial facilities, server rooms, and other environments where twisted-pair cables are used. The device supports rapid fault diagnosis, reducing time and effort required for troubleshooting. It is particularly useful during the installation of new networks or the maintenance of existing systems.
Functions and Equipment in Detail
The tester features a large, backlit display that shows test results in easy-to-understand messages. Operation is performed via an ergonomic interface designed for intuitive handling. An integrated tone generator enables cable location within the cabling system, which is helpful for identifying individual conductors in complex installations. The device is equipped with a detachable remote module featuring an RJ45 connector, used for testing at the opposite end of the cable.
Technology Explained Simply
The CableMaster 210 tests twisted-pair cables for various wiring faults. Individual conductors are checked for continuity and correct assignment. Breaks are detected when a conductor is not continuous. Short circuits occur when two conductors are unintentionally connected. Miswiring happens when conductors are wired in the wrong sequence. Split-pairs are faults where two conductors, normally wired as a pair, are routed separately. The device detects these faults and displays them directly on the screen.
Compatibility and Accessories
The device is designed for cables with RJ45 connectors, which represent the standard connection for Ethernet networks. The detachable remote module enables testing of cables over long distances. It serves as the receiving end for the tone generator and supports cable location. The exact designation of the tone receiver is PS_CP15, part number 226007.
Mounting and Installation
Installation of the CableMaster 210 involves simply connecting the device to one end of the cable to be tested and the detachable remote module to the other end. Testing is initiated by operating the control elements. The display shows results immediately. Operation requires no special prior knowledge, as the interface is intuitively designed. The quick-start guide, included in the delivery, supports initial setup.
Advantages in Operation
The CableMaster 210 offers fast and reliable fault detection, reducing working time during network maintenance. The combination of a large display, tone generator, and detachable remote module makes the device versatile. Simple operation and clear display of test results simplify work for installers. The device is compact and handheld, making it easy to transport and handle during use. The integrated cable location function via the tone generator is a key advantage when working in complex cabling systems.
The device is supplied with two AAA batteries 1.5 V, which are included in the delivery. The quick-start guide is also part of the delivery. The batteries are required for device operation, and the guide supports initial use.
Applications
The CableMaster 210 is primarily used in the field of network infrastructure, especially for the installation and maintenance of Ethernet cabling. It is suitable for testing cables in office buildings, industrial facilities, server rooms, and other environments where twisted-pair cables are used. The device supports rapid fault diagnosis, reducing time and effort required for troubleshooting. It is particularly useful during the installation of new networks or the maintenance of existing systems.
Functions and Equipment in Detail
The tester features a large, backlit display that shows test results in easy-to-understand messages. Operation is performed via an ergonomic interface designed for intuitive handling. An integrated tone generator enables cable location within the cabling system, which is helpful for identifying individual conductors in complex installations. The device is equipped with a detachable remote module featuring an RJ45 connector, used for testing at the opposite end of the cable.
Technology Explained Simply
The CableMaster 210 tests twisted-pair cables for various wiring faults. Individual conductors are checked for continuity and correct assignment. Breaks are detected when a conductor is not continuous. Short circuits occur when two conductors are unintentionally connected. Miswiring happens when conductors are wired in the wrong sequence. Split-pairs are faults where two conductors, normally wired as a pair, are routed separately. The device detects these faults and displays them directly on the screen.
Compatibility and Accessories
The device is designed for cables with RJ45 connectors, which represent the standard connection for Ethernet networks. The detachable remote module enables testing of cables over long distances. It serves as the receiving end for the tone generator and supports cable location. The exact designation of the tone receiver is PS_CP15, part number 226007.
Mounting and Installation
Installation of the CableMaster 210 involves simply connecting the device to one end of the cable to be tested and the detachable remote module to the other end. Testing is initiated by operating the control elements. The display shows results immediately. Operation requires no special prior knowledge, as the interface is intuitively designed. The quick-start guide, included in the delivery, supports initial setup.
Advantages in Operation
The CableMaster 210 offers fast and reliable fault detection, reducing working time during network maintenance. The combination of a large display, tone generator, and detachable remote module makes the device versatile. Simple operation and clear display of test results simplify work for installers. The device is compact and handheld, making it easy to transport and handle during use. The integrated cable location function via the tone generator is a key advantage when working in complex cabling systems.
The device is supplied with two AAA batteries 1.5 V, which are included in the delivery. The quick-start guide is also part of the delivery. The batteries are required for device operation, and the guide supports initial use.
Questions & answers
What is the delivery time of Softing IT Networks 226101 CM210 CableMaster 210 continuity and wiring tester LCD ?
The article Softing IT Networks 226101 CM210 CableMaster 210 continuity and wiring tester LCD is currently in stock
According to our experience the article is ready for dispatch within 5 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Softing IT Networks 226101 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Softing IT Networks 226101 CM210 CableMaster 210 continuity and wiring tester LCD always at the best possible price. We can give you a discount of 2% on Softing IT Networks 226101 CM210 CableMaster 210 continuity and wiring tester LCD if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.