Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
SITECO Logo

SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA

Your rating:
Average rating
product review for SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA
( 4.3 / 5 ) 3 ratings
SITECO 53BD812CV49XC2
This image may differ from the desired article.
222,68 EUR
( 264,99 EUR incl. VAT )
≈ £186.38  |  ≈ $244.73
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA
Datasheet:file_download Download
Lieske Part No.:843460
Mfg Part No: 53BD812CV49XC2
UPC/EAN: 4069025124289
Weight:3.68 kg
Type:53BD812CV49XC2
Graduated prices net
From piecesPrice per pieces
5217,67 EUR
10212,66 EUR
15207,65 EUR
20202,64 EUR

Product information for SITECO 53BD812CV49XC2:

The luminaire insert DUS 31 from SITECO, type 53BD812CV49XC2, is a modular lighting system designed for indoor use, suitable for industrial and commercial installations as well as in the food industry. The device consists of a housing made of coil-coated steel sheet in white colour, designed for mounting in standardised systems, with a total length of 1,535 mm and a system dimension of 307 mm. The light source is based on LED technology and produces a nominal luminous flux of 9,240 lumens at a light colour of 840 (corresponding to a colour temperature of approximately 4000 K). Colour fidelity is specified with an SDCM value of 3 (initial), ensuring high colour consistency and minimal colour deviation.

Applications

The luminaire insert is designed for indoor use, particularly in areas that must comply with IFS (International Featured Standards) requirements for safety and quality in the food industry. The permissible ambient temperature ranges from -35 °C to +40 °C; for ceiling mounting, a reduction of the maximum ambient temperature by 5 °C is required. The protection rating IP20 for the entire device and IP20 for the LED compartment ensure sufficient protection against contact and dust, with the LED compartment additionally protected against dust and splashing water. The impact resistance is IK03, indicating low mechanical resistance to mechanical impacts.

Functions and Equipment in Detail

The device is equipped with a control gear of type EIN/AUS Multilumen, CLOi, connected via a 3-pole plug with phase selection. The mains supply voltage is 220 to 240 volts AC at a frequency of 50/60 Hz. The wiring is accessible at the system dimension, enabling flexible integration into existing electrical systems. The primary optical cover is made of PMMA, a transparent plastic known for its high light transmittance and mechanical stability. The light emission is direct and radiant, with a symmetrical primary light characteristic, ensuring even light distribution in the room.

Technology Explained Simply

The LED light source is designed to provide constant light output throughout its lifetime. The beginning of life is specified at 50 watts and the end at 61 watts, describing the energy efficiency and performance development over the service life. The light source and control gear comply with the requirements of the Ecodesign Regulation (EU) 2019/2020 and are replaceable according to this regulation, improving maintenance and sustainability of the system. The protection class SK I (protective earthing) means the device is equipped with protective earthing to minimise electrical hazards.

Compatibility and Accessories

The luminaire insert is designed for use in modular systems based on a system dimension of 307 mm. The modular design allows flexible adaptation to different room geometries. The use of PMMA as the cover material ensures high light transmittance and long service life under normal operating conditions.

Mounting and Installation

Mounting is carried out in a modular system, with wiring accessible at the system dimension. This enables easy integration into existing electrical installations. Installation requires professional connection to the power supply network at 220–240 V AC and compliance with protective measures according to protection class SK I. The plug connection is 3-pole, enabling safe and reliable power supply.

Operational Advantages

The luminaire insert provides a high luminous output of 9,240 lumens at a colour temperature of 840, ensuring clear and neutral lighting. The modular design and replaceable components in accordance with the Ecodesign Regulation (EU) 2019/2020 simplify maintenance and reduce replacement and disposal effort. Compliance with IFS standards makes the device particularly suitable for applications in the food industry, where high hygiene and safety requirements apply. The protection ratings IP20 and IP20, as well as impact resistance IK03, ensure reliable operation under normal indoor conditions.

General
System dimension307 mm
Colour of light840
SDCM (initial)3
BallastON/OFF Multilumen, CLOi
Connector3-pole, with phase selection
Mains supply220..240 V
Frequency50/60 Hz
Start of service life50 W
End of life61 W
Light outletdirectly radiating
Light characteristicSymmetric
Degree of protection (overall)IP20
Degree of protection (LED chamber)IP50
Protection class (overall)SK I (protective earthing)
Test markCE, ENEC, VDE, UKCA
Impact strengthIK03
Permissible ambient temperature for indoor use-35..+40 °C
Housing materialsteel sheet, band lacquered, white
Primary optical coverPMMA
Through wiringtapable in system dimension
Eco-design regulationEU 2019/2020
Interchangeabilitylight source and operating device interchangeable
Applicationindoor spaces, food industry
Certificates, Standards
Protection ratingIP20
Protection rating (lamp compartment)IP50
Insulation classinsulation class I (protective earthing)
Impact resistanceIK03
Temperature range (operation)-35..+40°C
Supplementcorresponds to IFS (International Featured Standards) requirements for safety and quality in the food industry, reducing of maximum allowable ambient temperature of 5°C with ceiling mounting
Certification, designationCE, ENEC, VDE, UKCA
Dimensions, Weight
System units5x SE
Length1535mm
Width81mm
Height90mm
Weight1.8kg
Electrical connection
Connectionplug, 3-pole, with phase selection
Nominal voltage220..240V, 50/60Hz, AC
Key data
Product typeluminaire insert
Product nameDUS 31
Lamps
Lampswith LED
Rated luminous flux9240lm
Luminous efficacy185lm/W
Colour temperature4000K
Colour rendering indexCRI > 80
Light colour840
SDCM (Standard Deviation of Colour Matching)MacAdam ≤ 3 SDCM (initial)
Rated input power begin service life50
Rated input power end service life61
Lighting technology
Covercover, prismatic structure, frosted
Beam anglewide distribution
Symmetrysymmetric
Light emissiondirect distribution
UGR viewing direction along longitudinal luminaire axis≤ 25
UGR viewing direction along lateral luminaire axis≤ 25
Material, Colour
PS LED insertsheet steel, coil coated, white, 5x system unit, for tool-free mounting of luminaire in DUS mounting rail
Mounting
Arrangementsingle/continuous arrangement
Operating device
ControlON/OFF Multilumen, CLOi
Service life
Rated service life70000h (L100) at AT = 25°C, 70000h (L100) at AT = ta max


Product data sheet
Datasheet for SITECO 53BD812CV49XC2, EAN: 4069025124289

Questions & answers

What is the delivery time of SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA?

The article SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of SITECO 53BD812CV49XC2 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA always at the best possible price. We can give you a discount of 2% on SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA we can offer you a price of 217,67 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x SITECO 53BD812CV49XC2 light module LED 9.240 lm 840
SITECO 53BD812CV49XC2 DUS 31 Gen.2 lighting insert, LED, 9.240 lm 840, PMMA
222,68 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: SITECO 53BD812CV49XC2 light module LED 9.240 lm 840
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
4 + 6 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.