| General |
| System dimension | 307 mm |
| Colour of light | 840 |
| SDCM (initial) | 3 |
| Ballast | ON/OFF Multilumen, CLOi |
| Connector | 3-pole, with phase selection |
| Mains supply | 220..240 V |
| Frequency | 50/60 Hz |
| Start of service life | 50 W |
| End of life | 61 W |
| Light outlet | directly radiating |
| Light characteristic | Symmetric |
| Degree of protection (overall) | IP20 |
| Degree of protection (LED chamber) | IP50 |
| Protection class (overall) | SK I (protective earthing) |
| Test mark | CE, ENEC, VDE, UKCA |
| Impact strength | IK03 |
| Permissible ambient temperature for indoor use | -35..+40 °C |
| Housing material | steel sheet, band lacquered, white |
| Primary optical cover | PMMA |
| Through wiring | tapable in system dimension |
| Eco-design regulation | EU 2019/2020 |
| Interchangeability | light source and operating device interchangeable |
| Application | indoor spaces, food industry |
| Certificates, Standards |
| Protection rating | IP20 |
| Protection rating (lamp compartment) | IP50 |
| Insulation class | insulation class I (protective earthing) |
| Impact resistance | IK03 |
| Temperature range (operation) | -35..+40°C |
| Supplement | corresponds to IFS (International Featured Standards) requirements for safety and quality in the food industry, reducing of maximum allowable ambient temperature of 5°C with ceiling mounting |
| Certification, designation | CE, ENEC, VDE, UKCA |
| Dimensions, Weight |
| System units | 5x SE |
| Length | 1535mm |
| Width | 81mm |
| Height | 90mm |
| Weight | 1.8kg |
| Electrical connection |
| Connection | plug, 3-pole, with phase selection |
| Nominal voltage | 220..240V, 50/60Hz, AC |
| Key data |
| Product type | luminaire insert |
| Product name | DUS 31 |
| Lamps |
| Lamps | with LED |
| Rated luminous flux | 9240lm |
| Luminous efficacy | 185lm/W |
| Colour temperature | 4000K |
| Colour rendering index | CRI > 80 |
| Light colour | 840 |
| SDCM (Standard Deviation of Colour Matching) | MacAdam ≤ 3 SDCM (initial) |
| Rated input power begin service life | 50 |
| Rated input power end service life | 61 |
| Lighting technology |
| Cover | cover, prismatic structure, frosted |
| Beam angle | wide distribution |
| Symmetry | symmetric |
| Light emission | direct distribution |
| UGR viewing direction along longitudinal luminaire axis | ≤ 25 |
| UGR viewing direction along lateral luminaire axis | ≤ 25 |
| Material, Colour |
| PS LED insert | sheet steel, coil coated, white, 5x system unit, for tool-free mounting of luminaire in DUS mounting rail |
| Mounting |
| Arrangement | single/continuous arrangement |
| Operating device |
| Control | ON/OFF Multilumen, CLOi |
| Service life |
| Rated service life | 70000h (L100) at AT = 25°C, 70000h (L100) at AT = ta max |
The luminaire insert DUS 31 from SITECO, type 53BD812CV49XC2, is a modular lighting system designed for indoor use, suitable for industrial and commercial installations as well as in the food industry. The device consists of a housing made of coil-coated steel sheet in white colour, designed for mounting in standardised systems, with a total length of 1,535 mm and a system dimension of 307 mm. The light source is based on LED technology and produces a nominal luminous flux of 9,240 lumens at a light colour of 840 (corresponding to a colour temperature of approximately 4000 K). Colour fidelity is specified with an SDCM value of 3 (initial), ensuring high colour consistency and minimal colour deviation.
Applications
The luminaire insert is designed for indoor use, particularly in areas that must comply with IFS (International Featured Standards) requirements for safety and quality in the food industry. The permissible ambient temperature ranges from -35 °C to +40 °C; for ceiling mounting, a reduction of the maximum ambient temperature by 5 °C is required. The protection rating IP20 for the entire device and IP50 for the LED compartment ensure sufficient protection against contact and dust, with the LED compartment additionally protected against dust and splashing water. The impact resistance is IK03, indicating low mechanical resistance to mechanical impacts.
Functions and Equipment in Detail
The device is equipped with a control gear of type EIN/AUS Multilumen, CLOi, connected via a 3-pole plug with phase selection. The mains supply voltage is 220 to 240 volts AC at a frequency of 50/60 Hz. The wiring is accessible at the system dimension, enabling flexible integration into existing electrical systems. The primary optical cover is made of PMMA, a transparent plastic known for its high light transmittance and mechanical stability. The light emission is direct and radiant, with a symmetrical primary light characteristic, ensuring even light distribution in the room.
Technology Explained Simply
The LED light source is designed to provide constant light output throughout its lifetime. The beginning of life is specified at 50 watts and the end at 61 watts, describing the energy efficiency and performance development over the service life. The light source and control gear comply with the requirements of the Ecodesign Regulation (EU) 2019/2020 and are replaceable according to this regulation, improving maintenance and sustainability of the system. The protection class SK I (protective earthing) means the device is equipped with protective earthing to minimise electrical hazards.
Compatibility and Accessories
The luminaire insert is designed for use in modular systems based on a system dimension of 307 mm. The modular design allows flexible adaptation to different room geometries. The use of PMMA as the cover material ensures high light transmittance and long service life under normal operating conditions.
Mounting and Installation
Mounting is carried out in a modular system, with wiring accessible at the system dimension. This enables easy integration into existing electrical installations. Installation requires professional connection to the power supply network at 220–240 V AC and compliance with protective measures according to protection class SK I. The plug connection is 3-pole, enabling safe and reliable power supply.
Operational Advantages
The luminaire insert provides a high luminous output of 9,240 lumens at a colour temperature of 840, ensuring clear and neutral lighting. The modular design and replaceable components in accordance with the Ecodesign Regulation (EU) 2019/2020 simplify maintenance and reduce replacement and disposal effort. Compliance with IFS standards makes the device particularly suitable for applications in the food industry, where high hygiene and safety requirements apply. The protection ratings IP20 and IP50, as well as impact resistance IK03, ensure reliable operation under normal indoor conditions.