Ses-Sterling 03740030001L2 PLIO SNAP+ PS-03 L2 White content_copy

The PLIO SNAP+ PS-03 L2 marker from Ses-Sterling is a cable labelling system for use in electrical and IT technology. It is designed for the clear identification of cables and wires using self-adhesive markers supplied on carrier rods. Labelling is done with a black print on white carrier material, ensuring high readability and visual distinction. The markers are specifically designed for cable outer diameters between 1.9 mm and 2.6 mm and cable cross-sections of 0.75 mm², making them suitable for standard applications in network cabling, control systems, and electrical installations.

Cable labelling is a central component of structured cabling to avoid errors during installation, maintenance, or repair. The PLIO SNAP+ PS-03 L2 enables quick and precise labelling of cables, with the markers applied directly to the cable via their self-adhesive back. The use of POM (Polyoxymethylene) as material for the markers ensures high mechanical stability, resistance to abrasion, and chemical resistance, supporting the longevity of the labelling even under industrial conditions.

Carrier rods are green and serve as transport and storage units for the markers. They can be purchased empty, allowing for flexible use. The product is delivered in a packaging unit containing 10 loaded carrier rods, with a total of 300 markers per bag. The packaging weighs 28 g and is therefore lightweight and compact, simplifying transport and storage.

The markers are designed for indoor use, with the material selection and colour scheme (white with black print) ensuring clear visibility even under low lighting conditions. Labelling is done with the designation L2, which in practice often refers to a specific wire function, phase, or cabling group. The use of self-adhesive markers allows for quick installation without additional tools or adhesives.

The compatibility of the PLIO SNAP+ PS-03 L2 is limited to cables with an outer diameter of 1.9 to 2.6 mm and a cross-section of 0.75 mm². This covers a wide range of standard cables in electrical and IT technology, including data cables, control lines, and electrical wires. The markers are not suitable for larger or smaller cable diameters, as fit and adhesion cannot be guaranteed.

Installation is done by simply sticking the markers directly onto the cable. The self-adhesive backing ensures secure attachment, with the markers not slipping or detaching as long as the surface is clean and dry. The carrier rods facilitate the removal of individual markers and prevent loss of single pieces. The application requires no additional tools, reducing installation time and improving workflow efficiency.

Operational advantages include high readability, easy handling, and the longevity of the markers. The combination of white carrier and black print ensures clear visibility, while the POM material offers high mechanical strength and resistance to environmental influences. The packaging unit with 300 markers provides an economical solution for larger projects requiring a high number of labels.

Cable labelling systems such as the PLIO SNAP+ PS-03 L5,1 cm ( 2 inch ) are indispensable in modern cabling to minimise error sources and improve the maintainability of installations. Clear and unambiguous labelling supports documentation and facilitates wire identification during operation. The use of standardised labels such as "L2 enables uniform and understandable labelling that can also be understood by third parties.

The markers are available in white with black print, providing high contrast. The packaging unit contains 10 carrier rods with a total of 300 markers, representing a sufficient quantity for typical installations. The carrier rods are green and serve as practical storage units. Use is exclusively for indoor applications.

Self-adhesive markers offer the advantage of quick and tool-free installation. Adhesion is achieved via an integrated adhesive layer that reliably bonds to clean and dry cable surfaces. The markers are not reusable, as the adhesive layer becomes ineffective once removed. Therefore, they are intended for single-use only.

Labelling with the designation L2 is commonly used in practice for the second phase in three-phase cabling or for a specific wire function within a system. The exact meaning depends on the respective project standard, with uniform labelling within a project being essential.

The markers are not supplied with additional components such as batteries, tools, or instructions. The delivery scope is limited to the 300 markers on 10 green carrier rods in a bag. The packaging weighs 28 g and is designed for transport and storage.

The use of the PLIO SNAP+ PS-03 L2 is limited to the specified cable sizes. The markers are not suitable for cables outside the diameter range of 1.9 to 2.6 mm, as fit and adhesion cannot be guaranteed.

Use is exclusively for indoor applications.

Cable labelling is a critical component of structured cabling to avoid errors during installation, maintenance, or repair. The PLIO SNAP+ PS-03 L2 enables quick and precise labelling of cables, with the markers applied directly to the cable via their self-adhesive back. The use of POM (Polyoxymethylene) as material for the markers ensures high mechanical stability, resistance to abrasion, and chemical resistance, supporting the longevity of the labelling even under industrial conditions.

The markers are designed for indoor use, with the material selection and colour scheme (white with black print) ensuring clear visibility even under low lighting conditions. Labelling is done with the designation L2, which in practice often refers to a specific wire function, phase, or cabling group. The use of self-adhesive markers allows for quick installation without additional tools or adhesives.

Installation is done by simply sticking the markers directly onto the cable. The self-adhesive backing ensures secure attachment, with the markers not slipping or detaching as long as the surface is clean and dry. The carrier rods facilitate the removal of individual markers and prevent loss of single pieces. The application requires no additional tools, reducing installation time and improving workflow efficiency.

Operational advantages include high readability, easy handling, and the longevity of the markers. The combination of white carrier and black print ensures clear visibility, while the POM material offers high mechanical strength and resistance to environmental influences. The packaging unit with 300 markers provides an economical solution for larger projects requiring a high number of labels.

Cable labelling systems such as the PLIO SNAP+ PS-03 L5,1 cm ( 2 inch ) are indispensable in modern cabling to minimise error sources and improve the maintainability of installations. Clear and unambiguous labelling supports documentation and facilitates wire identification during operation. The use of standardised labels such as "L2 enables uniform and understandable labelling that can also be understood by third parties.

The markers are available in white with black print, providing high contrast. The packaging unit contains 10 carrier rods with a total of 300 markers, representing a sufficient quantity for typical installations. The carrier rods are green and serve as practical storage units. Use is exclusively for indoor applications.

Self-adhesive markers offer the advantage of quick and tool-free installation. Adhesion is achieved via an integrated adhesive layer that reliably bonds to clean and dry cable surfaces. The markers are not reusable, as the adhesive layer becomes ineffective once removed. Therefore, they are intended for single-use only.

Labelling with the designation L2 is commonly used in practice for the second phase in three-phase cabling or for a specific wire function within a system. The exact meaning depends on the respective project standard, with uniform labelling within a project being essential.

The markers are not supplied with additional components such as batteries, tools, or instructions. The delivery scope is limited to the 300 markers on 10 green carrier rods in a bag. The packaging weighs 28 g and is designed for transport and storage.

The use of the PLIO SNAP+ PS-03 L2 is limited to the specified cable sizes. The markers are not suitable for cables outside the diameter range of 1.9 to 2.6 mm, as fit and adhesion cannot be guaranteed.

Use is exclusively for indoor applications.