Ses-Sterling 03740030001G PLIO SNAP+ PS-03 G WH content_copy

The PLIO SNAP+ PS-03 G" marker from Ses-Sterling is a cable identification system for use in electrical and IT technology. It is designed for the clear identification of cables and lines using colour-coded, self-adhesive labels. The identification is achieved via a white marker with black print of the letter combination "G, mounted on a green carrier rod. The markers are designed for cable outer diameters of 1.9 to 2.6 mm, making them suitable for cables with a cross-section of 0.75 mm². The material of the markers consists of POM (polyoxymethylene), a robust, wear-resistant plastic suitable for industrial applications.

Cable identification is a central component of structured cabling to avoid errors during installation, maintenance or repair. The PLIO SNAP+ PS-7,6 cm ( 3 inch )G" enables quick and secure labelling of cables, with the white colour and black print ensuring high readability. The markers are self-adhesive and can be easily applied to the cable, with the connection secured by the SNAP+ system. The green carrier rods serve as storage and mounting aids and can be purchased empty, enabling flexible use.

Functions and equipment in detail include the use of POM material, known for its high strength, heat resistance and chemical resistance. The markers are designed for indoor use and are suitable for standard cable types in the field of electrical and data cabling. The packaging unit contains 10 loaded carrier rods, which in total include 300 markers. The carrier rods are green and serve as practical storage and mounting aids. The markers are pre-printed with the identification "G", allowing immediate use without additional labelling.

Technology explained simply shows that the markers feature a SNAP+ system ensuring secure and slip-resistant fastening onto the cable. The POM material ensures long service life and resistance to mechanical stress. The white colour with black print ensures clear visibility, even under low lighting conditions. The green carrier rods are not part of the markers themselves, but serve as aids for storage and mounting. The markers are not designed for outdoor use or in damp environments, as no specific protection ratings such as IP rating are specified.

Compatibility and accessories refer to use with cables in the diameter range of 1.9 to 2.6 mm and a cross-section of 0.75 mm². The markers are part of the PLIO SNAP+ system and can be combined with other markers from the same product range to ensure a uniform identification system. The green carrier rods are optionally available and serve to improve handling and storage.

Mounting and installation is done by simply applying the marker onto the cable. The SNAP+ system ensures that the marker fits securely onto the cable and does not slip. The markers are self-adhesive, so no additional adhesives or tools are required. The green carrier rods facilitate the removal of individual markers and prevent loss of individual pieces. Installation is quick and does not require special training or tools.

Advantages in operation include easy handling, high readability and the durability of the material. The markers are suitable for use in industrial and commercial environments where clear and permanent cable identification is required. The use of POM ensures high mechanical strength and resistance to wear. The packaging unit with 300 markers offers an economical solution for larger projects. The green carrier rods enable orderly storage and simplify installation.

The colour of the markers is white, the print is black and shows the identification G. The markers are made of POM and fit cables with an outer diameter of 1.9 to 2.6 mm. The carrier rods are green and serve as mounting aids. The packaging unit contains 300 markers on 10 carrier rods.