Ses-Sterling 03640001004 Silavia Twin ST-0 * yellow rings 1.3–2 mm *
|
-14% 4,23 EUR 4,91 EUR |
|
|
( 5,03 EUR incl. VAT ) ≈ £3.54 | ≈ $4.71 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |
| Sales unit: 100 pieces | |
| Datasheet: | file_download Download |
|---|---|
| Lieske Part No.: | 1262369 |
| Mfg Part No: | 03640001004 |
| UPC/EAN: | 3597470049570 |
| Weight: | 0.002 kg |
| Type: | Silavia Twin ST-0 * gelb |
Further Labeling, marking from Ses-SterlingFurther products in category Labeling, marking
All products of Ses-Sterling
Product information for Ses-Sterling 03640001004*:
Identification rings of the Silavia Twin ST-0 * series in yellow are specifically designed for marking cables with an outer diameter of 1.3 to 2 mm. The manufacturer is Ses-Sterling, and the product is offered as part of rubber cable identification systems. The rings serve for the unambiguous identification of lines in installations, particularly in areas where visual differentiation of cables is required, such as in electrical installations, building automation, or industrial control technology. The yellow color with black print ensures high readability and contrast, supporting visibility even under low lighting conditions.
Identification rings made of rubber are flexible and adapt to the cable diameter without damaging the insulation. The width of the rings is 3.9 mm, providing sufficient surface area for labeling. The print size is 1.8 mm, ensuring the labeling remains clear and legible. The rings are designed for use on cables with an outer diameter between 1.3 mm and 2 mm, making them particularly suitable for fine wires in compact installations.
Cable identification is an essential component of proper installation and maintenance of electrical systems. The Silavia Twin ST-0 * rings enable quick and unambiguous assignment of cables, which is advantageous during maintenance, fault finding, or expansion of existing systems. The use of color-coded rings also supports compliance with standards and norms that require clear labeling.
Rubber as a material offers high flexibility and elasticity, allowing the rings to be easily slipped over the cable. The material choice also ensures good adhesion to the cable and prevents the marking from shifting during operation.
The packaging unit contains 100 pieces, enabling economical use in larger installations. The rings are delivered in individual packaging, which protects the markings during transport and storage. The weight per piece is 0.022 g, indicating a lightweight and compact design.
The marking technique using these rings is simple and requires no additional tools. The rings are simply slipped over the cable and positioned at the desired location. The labeling is pre-printed, so no additional marking is required on-site. This reduces installation time and minimizes error sources.
The compatibility of the rings is limited to cables with an outer diameter of 1.3 to 2 mm. They are not designed for thicker or thinner cables. Therefore, their use is restricted to specific applications where the specified diameters occur.
The packaging unit of 100 pieces enables efficient storage and distribution. The rings are delivered in individual packaging, which protects the markings during transport and storage. The packaging is not intended for direct use on the cable but serves exclusively for storage and transport of the rings.
Operational advantages include easy handling, clear readability of the labeling, and reusability of the rings, provided they are not damaged. Uniform color coding and labeling facilitate systematics in installation and contribute to error prevention. The rings are not designed for use in explosive environments or under high mechanical stress, as no corresponding approvals or specifications are available.
The rings are available in yellow with black print. The color yellow is commonly used in electrical installations for specific functions or systems, with the exact assignment varying according to internal systems or standards. The labeling is pre-printed, so no additional markings are required on-site.
The weight specification per piece is 0.022 g, indicating a lightweight and compact design. The total weight of the packaging is 0.002 kg, corresponding to the total mass of 100 rings. The rings are not designed for use in environments with high mechanical stress or high temperatures, as no corresponding specifications are available.
The EAN number of the product is 3597470049570. The manufacturer's number is 03640001004*. The rings are available in a packaging unit of 100 pieces.
Therefore, use is restricted to indoor environments where the rings are protected from direct moisture, sunlight, or mechanical stress.
The marking technique using these rings is simple and requires no additional tools. The rings are simply slipped over the cable and positioned at the desired location. The labeling is pre-printed, so no additional marking is required on-site. This reduces installation time and minimizes error sources.
The compatibility of the rings is limited to cables with an outer diameter of 1.3 to 2 mm. They are not designed for thicker or thinner cables. Therefore, their use is restricted to specific applications where the specified diameters occur.
The packaging unit of 100 pieces enables efficient storage and distribution. The rings are delivered in individual packaging, which protects the markings during transport and storage. The packaging is not intended for direct use on the cable but serves exclusively for storage and transport of the rings.
Operational advantages include easy handling, clear readability of the labeling, and reusability of the rings, provided they are not damaged. Uniform color coding and labeling facilitate systematics in installation and contribute to error prevention. The rings are not designed for use in explosive environments or under high mechanical stress, as no corresponding approvals or specifications are available.
The rings are available in yellow with black print. The color yellow is commonly used in electrical installations for specific functions or systems, with the exact assignment varying according to internal systems or standards. The labeling is pre-printed, so no additional markings are required on-site.
The weight specification per piece is 0.022 g, indicating a lightweight and compact design. The total weight of the packaging is 0.002 kg, corresponding to the total mass of 100 rings. The rings are not designed for use in environments with high mechanical stress or high temperatures, as no corresponding specifications are available.
The EAN number of the product is 3597470049570. The manufacturer's number is 03640001004*. The rings are available in a packaging unit of 100 pieces.
Therefore, use is restricted to indoor environments where the rings are protected from direct moisture, sunlight, or mechanical stress.
The item price shown refers to 100 pieces Ses-Sterling 03640001004*
Identification rings made of rubber are flexible and adapt to the cable diameter without damaging the insulation. The width of the rings is 3.9 mm, providing sufficient surface area for labeling. The print size is 1.8 mm, ensuring the labeling remains clear and legible. The rings are designed for use on cables with an outer diameter between 1.3 mm and 2 mm, making them particularly suitable for fine wires in compact installations.
Cable identification is an essential component of proper installation and maintenance of electrical systems. The Silavia Twin ST-0 * rings enable quick and unambiguous assignment of cables, which is advantageous during maintenance, fault finding, or expansion of existing systems. The use of color-coded rings also supports compliance with standards and norms that require clear labeling.
Rubber as a material offers high flexibility and elasticity, allowing the rings to be easily slipped over the cable. The material choice also ensures good adhesion to the cable and prevents the marking from shifting during operation.
The packaging unit contains 100 pieces, enabling economical use in larger installations. The rings are delivered in individual packaging, which protects the markings during transport and storage. The weight per piece is 0.022 g, indicating a lightweight and compact design.
The marking technique using these rings is simple and requires no additional tools. The rings are simply slipped over the cable and positioned at the desired location. The labeling is pre-printed, so no additional marking is required on-site. This reduces installation time and minimizes error sources.
The compatibility of the rings is limited to cables with an outer diameter of 1.3 to 2 mm. They are not designed for thicker or thinner cables. Therefore, their use is restricted to specific applications where the specified diameters occur.
The packaging unit of 100 pieces enables efficient storage and distribution. The rings are delivered in individual packaging, which protects the markings during transport and storage. The packaging is not intended for direct use on the cable but serves exclusively for storage and transport of the rings.
Operational advantages include easy handling, clear readability of the labeling, and reusability of the rings, provided they are not damaged. Uniform color coding and labeling facilitate systematics in installation and contribute to error prevention. The rings are not designed for use in explosive environments or under high mechanical stress, as no corresponding approvals or specifications are available.
The rings are available in yellow with black print. The color yellow is commonly used in electrical installations for specific functions or systems, with the exact assignment varying according to internal systems or standards. The labeling is pre-printed, so no additional markings are required on-site.
The weight specification per piece is 0.022 g, indicating a lightweight and compact design. The total weight of the packaging is 0.002 kg, corresponding to the total mass of 100 rings. The rings are not designed for use in environments with high mechanical stress or high temperatures, as no corresponding specifications are available.
The EAN number of the product is 3597470049570. The manufacturer's number is 03640001004*. The rings are available in a packaging unit of 100 pieces.
Therefore, use is restricted to indoor environments where the rings are protected from direct moisture, sunlight, or mechanical stress.
The marking technique using these rings is simple and requires no additional tools. The rings are simply slipped over the cable and positioned at the desired location. The labeling is pre-printed, so no additional marking is required on-site. This reduces installation time and minimizes error sources.
The compatibility of the rings is limited to cables with an outer diameter of 1.3 to 2 mm. They are not designed for thicker or thinner cables. Therefore, their use is restricted to specific applications where the specified diameters occur.
The packaging unit of 100 pieces enables efficient storage and distribution. The rings are delivered in individual packaging, which protects the markings during transport and storage. The packaging is not intended for direct use on the cable but serves exclusively for storage and transport of the rings.
Operational advantages include easy handling, clear readability of the labeling, and reusability of the rings, provided they are not damaged. Uniform color coding and labeling facilitate systematics in installation and contribute to error prevention. The rings are not designed for use in explosive environments or under high mechanical stress, as no corresponding approvals or specifications are available.
The rings are available in yellow with black print. The color yellow is commonly used in electrical installations for specific functions or systems, with the exact assignment varying according to internal systems or standards. The labeling is pre-printed, so no additional markings are required on-site.
The weight specification per piece is 0.022 g, indicating a lightweight and compact design. The total weight of the packaging is 0.002 kg, corresponding to the total mass of 100 rings. The rings are not designed for use in environments with high mechanical stress or high temperatures, as no corresponding specifications are available.
The EAN number of the product is 3597470049570. The manufacturer's number is 03640001004*. The rings are available in a packaging unit of 100 pieces.
Therefore, use is restricted to indoor environments where the rings are protected from direct moisture, sunlight, or mechanical stress.
The item price shown refers to 100 pieces Ses-Sterling 03640001004*
| General | |
| Colour | Yellow |
Questions & answers
What is the delivery time of Ses-Sterling 03640001004 Silavia Twin ST-0 * yellow rings 1.3–2 mm *?
The article Ses-Sterling 03640001004 Silavia Twin ST-0 * yellow rings 1.3–2 mm * is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Ses-Sterling 03640001004* to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Ses-Sterling 03640001004 Silavia Twin ST-0 * yellow rings 1.3–2 mm * always at the best possible price. We can give you a discount of 2% on Ses-Sterling 03640001004 Silavia Twin ST-0 * yellow rings 1.3–2 mm * if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
Ses-Sterling 03640001004 Silavia Twin ST-0 * yellow rings 1.3–2 mm * is offered by us in a sales unit of 100 pieces If you need a larger quantity, you can contact us at any time. We will make a special offer for you