General
Colour	Yellow

Identification rings of the Silavia Twin ST-0 * series in yellow are specifically designed for marking cables with an outer diameter of 1.3 to 2 mm. The manufacturer is Ses-Sterling, and the product is offered as part of rubber cable identification systems. The rings serve for the unambiguous identification of lines in installations, particularly in areas where visual differentiation of cables is required, such as in electrical installations, building automation, or industrial control technology. The yellow color with black print ensures high readability and contrast, supporting visibility even under low lighting conditions.

Identification rings made of rubber are flexible and adapt to the cable diameter without damaging the insulation. The width of the rings is 3.9 mm, providing sufficient surface area for labeling. The print size is 1.8 mm, ensuring the labeling remains clear and legible. The rings are designed for use on cables with an outer diameter between 1.3 mm and 2 mm, making them particularly suitable for fine wires in compact installations.

Cable identification is an essential component of proper installation and maintenance of electrical systems. The Silavia Twin ST-0 * rings enable quick and unambiguous assignment of cables, which is advantageous during maintenance, fault finding, or expansion of existing systems. The use of color-coded rings also supports compliance with standards and norms that require clear labeling.

Rubber as a material offers high flexibility and elasticity, allowing the rings to be easily slipped over the cable. The material choice also ensures good adhesion to the cable and prevents the marking from shifting during operation.

The packaging unit contains 100 pieces, enabling economical use in larger installations. The rings are delivered in individual packaging, which protects the markings during transport and storage. The weight per piece is 0.022 g, indicating a lightweight and compact design.

The marking technique using these rings is simple and requires no additional tools. The rings are simply slipped over the cable and positioned at the desired location. The labeling is pre-printed, so no additional marking is required on-site. This reduces installation time and minimizes error sources.

The compatibility of the rings is limited to cables with an outer diameter of 1.3 to 2 mm. They are not designed for thicker or thinner cables. Therefore, their use is restricted to specific applications where the specified diameters occur.

The packaging unit of 100 pieces enables efficient storage and distribution. The rings are delivered in individual packaging, which protects the markings during transport and storage. The packaging is not intended for direct use on the cable but serves exclusively for storage and transport of the rings.

Operational advantages include easy handling, clear readability of the labeling, and reusability of the rings, provided they are not damaged. Uniform color coding and labeling facilitate systematics in installation and contribute to error prevention. The rings are not designed for use in explosive environments or under high mechanical stress, as no corresponding approvals or specifications are available.

The rings are available in yellow with black print. The color yellow is commonly used in electrical installations for specific functions or systems, with the exact assignment varying according to internal systems or standards. The labeling is pre-printed, so no additional markings are required on-site.

The weight specification per piece is 0.022 g, indicating a lightweight and compact design. The total weight of the packaging is 0.002 kg, corresponding to the total mass of 100 rings. The rings are not designed for use in environments with high mechanical stress or high temperatures, as no corresponding specifications are available.

The EAN number of the product is 3597470049570. The manufacturer's number is 03640001004*. The rings are available in a packaging unit of 100 pieces.

Therefore, use is restricted to indoor environments where the rings are protected from direct moisture, sunlight, or mechanical stress.

The marking technique using these rings is simple and requires no additional tools. The rings are simply slipped over the cable and positioned at the desired location. The labeling is pre-printed, so no additional marking is required on-site. This reduces installation time and minimizes error sources.

The compatibility of the rings is limited to cables with an outer diameter of 1.3 to 2 mm. They are not designed for thicker or thinner cables. Therefore, their use is restricted to specific applications where the specified diameters occur.

The packaging unit of 100 pieces enables efficient storage and distribution. The rings are delivered in individual packaging, which protects the markings during transport and storage. The packaging is not intended for direct use on the cable but serves exclusively for storage and transport of the rings.

Operational advantages include easy handling, clear readability of the labeling, and reusability of the rings, provided they are not damaged. Uniform color coding and labeling facilitate systematics in installation and contribute to error prevention. The rings are not designed for use in explosive environments or under high mechanical stress, as no corresponding approvals or specifications are available.

The rings are available in yellow with black print. The color yellow is commonly used in electrical installations for specific functions or systems, with the exact assignment varying according to internal systems or standards. The labeling is pre-printed, so no additional markings are required on-site.

The weight specification per piece is 0.022 g, indicating a lightweight and compact design. The total weight of the packaging is 0.002 kg, corresponding to the total mass of 100 rings. The rings are not designed for use in environments with high mechanical stress or high temperatures, as no corresponding specifications are available.

The EAN number of the product is 3597470049570. The manufacturer's number is 03640001004*. The rings are available in a packaging unit of 100 pieces.

Therefore, use is restricted to indoor environments where the rings are protected from direct moisture, sunlight, or mechanical stress.