Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK
|
245,10 EUR 255,42 EUR |
|||||||||||
|
( 291,67 EUR incl. VAT ) ≈ £205.15 | ≈ $269.36 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 8 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1593175 | ||||||||||
| Mfg Part No: | XPSUS12AP | ||||||||||
| UPC/EAN: | 3606489601812 | ||||||||||
| Weight: | 0.279 kg | ||||||||||
| Type: | XPSUS12AP | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric XPSUS12AP:
| Complementary | |
| Synchronisation time between inputs | 0.5 s; 2 s; 4 s |
| Type of start | Automatic/manual/monitored |
| Power consumption in W | 2 W 24 V DC |
| Power consumption in VA | 5.0 VA 24 V AC 50/60 Hz |
| Input protection type | Internal, electronic |
| safety outputs | 2 NO |
| safety inputs | 2 safety input 24 V DC 5 mA |
| maximum wire resistance | 500 Ohm |
| Input compatibility | Normally closed circuit conforming to ISO 14119; XC limit switch conforming to ISO 14119; Mechanical contact conforming to ISO 14119; Normally closed circuit conforming to ISO 13850; Antivalent pair conforming to ISO 14119; OSSD pair conforming to IEC 61496-1-2; Two-hand control conforming to EN 574/ISO 13851-III A; Two-hand control conforming to EN 574/ISO 13851-III C; 3-wire proximity sensors PNP |
| [Ie] rated operational current | 5 A AC-1 for normally open relay contact; 3 A AC-15 for normally open relay contact; 5 A DC-1 for normally open relay contact; 3 A DC-13 for normally open relay contact; 3 A AC-1 for normally closed relay contact; 1 A AC-15 for normally closed relay contact; 3 A DC-1 for normally closed relay contact; 1 A DC-13 for normally closed relay contact |
| control outputs | 3 on/off configurable pulsed output |
| Input/output type | Semiconductor pulsed diagnostic output 24 V DC, 20 mA Z1, not safety-related |
| [Ith] conventional free air thermal current | 8 A |
| Associated fuse rating | 10 A gG for NO relay output circuit conforming to IEC 60947-1 |
| Minimum output current | 10 mA for relay output |
| Minimum output voltage | 12 V for relay output |
| Maximum response time on input open | 20 ms |
| [Ui] rated insulation voltage | 250 V (pollution degree 2) conforming to IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 4 kV overvoltage category II conforming to IEC 60947-1 |
| Local signalling | LED (green) for power ON; LED (red) for error; LED (yellow) for safety output status; LED (yellow) for start input; LED (yellow) for safety input S12; LED (yellow) for safety input S13; LED (yellow) for safety input S22; LED (yellow) for safety input S23 |
| Mounting support | 35 mm symmetrical DIN rail |
| Depth | 120 mm |
| Height | 100 mm |
| Width | 22.5 mm |
| Net weight | 0.200 kg |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | IEC 60947-5-1; IEC 61508-1 functional safety standard; IEC 61508-2 functional safety standard; IEC 61508-3 functional safety standard; IEC 61508-4 functional safety standard; IEC 61508-5 functional safety standard; IEC 61508-6 functional safety standard; IEC 61508-7 functional safety standard; ISO 13849-1 functional safety standard; IEC 62061 functional safety standard |
| Product certifications | TÜV; cULus |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529; IP40 (housing) conforming to IEC 60529; IP54 (mounting area) conforming to IEC 60529 |
| Ambient air temperature for storage | -25…85 °C |
| Relative humidity | 5…95 % non-condensing |
| Logistical informations | |
| Country of origin | ID |
| Main | |
| Range of product | Harmony Safety Automation |
| Product or component type | Safety module |
| Safety module name | XPSUS |
| Safety module application | For electrical monitoring of two-hand control stations; Monitoring antivalent contacts; For emergency stop, guard and light curtain monitoring; For enabling switch monitoring |
| Function of module | Emergency stop button with 2 NC contacts; Guard monitoring with 1 or 2 limit switches; Monitoring 2 PNP sensors; Magnetic switch monitoring; Light curtain monitoring; RFID switch; Monitoring of electro-sensitive protection equipment (ESPE); Enabling switch monitoring; Proximity sensor monitoring; Monitoring two-hand control station |
| Safety level | Can reach PL e/category 4 conforming to ISO 13849-1; Can reach SILCL 3 conforming to IEC 62061; Can reach SIL 3 conforming to IEC 61508 |
| Safety reliability data | MTTFd > 30 years conforming to ISO 13849-1; Dcavg >= 99 % conforming to ISO 13849-1; PFHd = 1.13E-09 conforming to ISO 13849-1; HFT = 1 conforming to IEC 62061; PFHd = 1.13E-09 conforming to IEC 62061; SFF > 99% conforming to IEC 62061; HFT = 1 conforming to IEC 61508-1; PFHd = 1.13E-09 conforming to IEC 61508-1; SFF > 99% conforming to IEC 61508-1; Type = B conforming to IEC 61508-1 |
| Electrical circuit type | NC pair; PNP pair; Antivalent pair; OSSD pair |
| Connections - terminals | Removable screw terminal block, 0.2...2.5 mm² solid or flexible; Removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductor; Removable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductor; Removable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel; Removable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel |
| [Us] rated supply voltage | 24 V AC - 15...10 %; 24 V DC - 20...20 % |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.500 cm |
| Package 1 Width | 13.500 cm |
| Package 1 Length | 16.000 cm |
| Package 1 Weight | 279.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 16 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 5.133 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 128 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 47.500 kg |
Questions & answers
What is the delivery time of Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK?
The article Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric XPSUS12AP to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK always at the best possible price. We can give you a discount of 2% on Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK we can offer you a price of 235,91 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Schneider Electric XPSBAC14AP safety relay 1 function 1 circuit PLe/Cat4/SIL3 4S 2NC
The Harmony XPS Basic safety relays implement basic safety functions. The focus is on classic functions and easy operation with many switching contacts. It can be operated directly without any ...Lieske Part No.: 1895013 Mfg Part No: XPSBAC14AP |
171,47 EUR 178,70 EUR
![]() ≈ £143.52 | ≈ $188.45
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
Fitting accessory for Schneider Electric XPSUS12AP safety relay 10FKT 2K 2S 1T 24V SK
|
Schneider Electric XPSES safety relay replacement latching bands
Safety relay Harmony XPS accessories. To protect the settings on the XPSB and XPSU safety relays, the transparent front cover can be locked against opening using this tape. Each sealing tape is ...Lieske Part No.: 1778267 Mfg Part No: XPSES |
8,08 EUR 8,42 EUR
![]() ≈ £6.76 | ≈ $8.88
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric XPSEC safety relay coding bits for terminal blocks
Safety relay Harmony XPS accessories. The removable terminal blocks of the XPSB and XPSU safety relays can be protected against being mixed up with these optional coding bits. The bits are used to ...Lieske Part No.: 1778268 Mfg Part No: XPSEC |
7,48 EUR 7,79 EUR
![]() ≈ £6.26 | ≈ $8.22
Made to order · Delivery time approx. 8 workdaysinfo_outline
|





