Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking
|
45,98 EUR 47,55 EUR |
|||||||||||
|
( 54,72 EUR incl. VAT ) ≈ £38.49 | ≈ $50.53 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 7 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 286582 | ||||||||||
| Mfg Part No: | XALK178E | ||||||||||
| UPC/EAN: | 3389110113662 | ||||||||||
| Weight: | 0.194 kg | ||||||||||
| Type: | XALK178E | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric XALK178E:
Applications
This device is intended for universal use in industry and machine building, particularly in environments where rapid and reliable shutdown is required. The robust polycarbonate construction makes it suitable for applications with high mechanical stress and in environments where cleaning processes with high-pressure washers (up to 7000000 Pa at 55 °C) are performed. The operating temperature ranges from -40 °C to +70 °C, enabling use in extreme environmental conditions. The degree of protection is not explicitly stated, but the construction is designed for use in industrial environments.
Functions and Equipment in Detail
The pushbutton is designed as a stepped switch, with an operating stroke of 1.5 mm (normally open) and 2.6 mm (normally closed), for a total stroke of 4.3 mm. The actuation force is 44 N. The contacts are made of a silver alloy (Ag/Ni), ensuring high contact reliability and low wear. The mechanical life is 300000 cycles, and the electrical life is 1000000 cycles under AC-15 operation at 2 A, 230 V. The contacts are configured as one normally open and one normally closed, with positive opening guaranteed according to IEC 60947-5-1, Annex K. Connections are made via screw terminals designed for a cable cross-section of 0.22 mm², without wire end ferrules. The tightening torque is between 0.8 and 1.2 Nm.
Technology Explained Simply
The rated insulation voltage is 600 V (pollution degree 3), and the rated impulse voltage withstand is 6 kV, confirming suitability for industrial applications with high electrical loads. The control voltage can operate on alternating current (120–600 V, 50/60 Hz) or direct current (125–600 V). The rated operating currents range from 0.1 A to 6 A, depending on voltage and load type. The overvoltage category is Class II according to IEC 60536. For short-circuit protection, a 10 A fuse type gG is specified. Electrical reliability is specified according to IEC 60947-5-4, with a failure rate of Λ < 10exp(-6) at 5 V, 1 mA and Λ < 10exp(-8) at 17 V, 5 mA.
Compatibility and Accessories
The device is designed for mounting XB5 Ø 22 mm control and signaling units. Compatible accessories include, for example, the mounting key ZB5AZ905, the illuminated emergency stop switch XALK84W3BE, the push-button ZB5AS844, and the emergency stop set XALK178W3B140E with an illuminated sign. These components allow for functional expansion, particularly regarding signaling and operability.
Mounting and Installation
Mounting is performed in enclosures or on machine fronts. The housing features a hole with Ø 22 mm and is pre-equipped at the factory. Cable entry is via a cutout for cables up to 14 mm or via two cutouts for cable glands Pg 13 and ISO M20 (0–12 mm). The screw heads are compatible with Phillips No. 1, position No. 1, as well as flat screwdrivers Ø 4 mm and Ø 5.5 mm. The coating is TH, indicating a specific surface treatment.
Operational Advantages
The unit offers high mechanical and electrical life, secure resetting via rotary lock, and clear visual identification through color coding. The use of polycarbonate ensures high mechanical stability and resistance to environmental influences. The integrated short-circuit protection fuse (10 A type gG) increases operational safety. The flexible mounting option for auxiliary switches (front or bottom mounting) allows application-specific adaptation. Compatibility with XB5 control and signaling units ensures easy integration into existing systems.
| Complementary | |
| AC control voltage 50 HZ | 120…600 V |
| Cable entry | 1 knock-out for cable entry 0…14 mm; 2 knock-outs for Pg 13 cable gland and ISO M20 0…12 mm |
| AC control voltage 60 HZ | 120…600 V |
| Net weight | 0.194 kg |
| DC control voltage | 125…600 V |
| Resistance to high pressure washer | 7000000 Pa at 55 °C, distance : 0.1 m |
| Number of command positions | 1 |
| Number of indicator lights | 0 |
| Number of push buttons | 0 |
| Positive opening | With conforming to IEC 60947-5-1 appendix K |
| Operating travel | 1.5 mm (NC changing electrical state); 2.6 mm (NO changing electrical state); 4.3 mm (total travel) |
| Operating force | 44 N NC + NO changing electrical state |
| Number of selector switches | 0 |
| Mechanical durability | 300000 cycles |
| Connections - terminals | Screw clamp terminals, = 1 x 0.22 mm² without cable end conforming to IEC 60947-1 |
| Number of key switches | 0 |
| Tightening torque | 0.8…1.2 N.m conforming to IEC 60947-1 |
| Shape of screw head | Cross compatible with Philips no 1 screwdriver; Cross compatible with pozidriv No 1 screwdriver; Slotted compatible with flat Ø 4 mm screwdriver; Slotted compatible with flat Ø 5.5 mm screwdriver |
| Contacts material | Silver alloy (Ag/Ni) |
| Short-circuit protection | 10 A cartridge fuse type gG conforming to IEC 60947-5-1 |
| [Ith] conventional free air thermal current | 10 A conforming to IEC 60947-5-1 |
| Number of mushroom-shaped push-buttons | 1 |
| [Ui] rated insulation voltage | 600 V (pollution degree 3) conforming to IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-1 |
| [Ie] rated operational current | 3 A at 240 V, AC-15, A600 conforming to IEC 60947-5-1; 6 A at 120 V, AC-15, A600 conforming to IEC 60947-5-1; 0.1 A at 600 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.27 A at 250 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.55 A at 125 V, DC-13, Q600 conforming to IEC 60947-5-1; 1.2 A at 600 V, AC-15, A600 conforming to IEC 60947-5-1 |
| Electrical durability | 1000000 cycles, AC-15, 2 A at 230 V, operating rate |
| Electrical reliability | Λ < 10exp(-6) at 5 V, 1 mA conforming to IEC 60947-5-4; Λ < 10exp(-8) at 17 V, 5 mA conforming to IEC 60947-5-4 |
| Number of contacts as normally closed contact | 1 |
| Number of contacts as normally open contact | 1 |
| Number of contacts as change-over contact | 0 |
| Housing material | Plastic |
| Housing colour | Yellow |
| Emergency power off | |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Protective treatment | TH |
| Ambient air temperature for storage | -40…70 °C |
| Ambient air temperature for operation | -40…70 °C |
| Overvoltage category | Class II conforming to IEC 60536 |
| IP degree of protection | IP66 conforming to IEC 60529; IP67; IP69; IP69K |
| NEMA degree of protection | NEMA 13; NEMA 4X |
| IK degree of protection | IK03 conforming to IEC 62262 |
| Standards | IEC 60947-5-4; CSA C22.2 No 14; UL 508; IEC 60947-5-5; ISO 13850; IEC 60947-5-1; JIS C 4520; IEC 60364-5-53; IEC 60947-1; IEC 60204-1 |
| Vibration resistance | 5 gn (f= 12…500 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27; 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 |
| Logistical informations | |
| Country of origin | CZ |
| Main | |
| Range of product | Harmony XALK |
| Product or component type | Complete control station |
| Device short name | XALK |
| Product destination | For XB5 Ø 22 mm control and signalling units |
| Control station application | Emergency switching off function; Emergency stop function |
| Colour of base of enclosure | Light grey (RAL 7035) |
| Colour of cover | Yellow (RAL 1021) |
| Material | Polycarbonate |
| Operator profile | 1 mushroom head push-button |
| Operators description | Red unmarked 1 NO + 1 NC |
| Reset | Turn to release |
| Control station composition | 1 mushroom head Ø 40 mm push-button, red 1 NO + 1 NC unmarked marking |
| Contact operation | Slow-break |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.700 cm |
| Package 1 Width | 7.000 cm |
| Package 1 Length | 7.000 cm |
| Package 1 Weight | 170.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 40 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.180 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 320 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 67.644 kg |
Questions & answers
What is the delivery time of Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking?
The article Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 7 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric XALK178E to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking always at the best possible price. We can give you a discount of 2% on Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 10 pieces of Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking we can offer you a price of 43,57 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric XALK178E housing with push-button 1NO+1NC 40 mm red rotary locking
|
Schneider Electric ZB5AS844 push-button 40 mm red emergency stop/emergency off rotary locking plastic D22
The product ZB5AS844 from Schneider Electric is a front element for emergency stop pushbuttons from the Harmony XB5 series. It serves as a base component for mounting in industrial control and safety ...Lieske Part No.: 511306 Mfg Part No: ZB5AS844 |
23,18 EUR 24,16 EUR
![]() ≈ £19.40 | ≈ $25.47
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric ZB5AZ905 mounting key for tightening ZB5AZ901 plastic D22 mm
The product ZB5AZ905 from Schneider Electric is a mounting key, specifically designed for securing head-mounting nuts in the Harmony XB5 range. It is a tensioning tool intended for the safe and ...Lieske Part No.: 797204 Mfg Part No: ZB5AZ905 |
3,08 EUR 3,21 EUR
![]() ≈ £2.58 | ≈ $3.38
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric XALK84W3BE illuminated emergency stop/emergency halt in housing
The plastic surface-mounted housings of the Harmony XALK series are available both as complete housings for direct use and as empty housings for individual assembly. The robust plastic housings made ...Lieske Part No.: 1778231 Mfg Part No: XALK84W3BE |
77,61 EUR 80,88 EUR
![]() ≈ £64.96 | ≈ $85.29
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric XALK178W3B140E emergency stop/emergency halt + illuminated sign
The plastic surface-mounted housings of the Harmony XALK series are available both as complete housings for direct use and as empty housings for individual assembly. The robust plastic housings made ...Lieske Part No.: 1859793 Mfg Part No: XALK178W3B140E |
80,66 EUR 84,05 EUR
![]() ≈ £67.51 | ≈ $88.65
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
















