Further information for Schneider Electric XALK178E enclosure pushbutton 1S+1Ö 40 mm red
Complementary
AC control voltage 50 HZ
120…600 V
Cable entry
1 knock-out for cable entry 0…14 mm; 2 knock-outs for Pg 13 cable gland and ISO M20 0…12 mm
AC control voltage 60 HZ
120…600 V
Net weight
0.194 kg
DC control voltage
125…600 V
Resistance to high pressure washer
7000000 Pa at 55 °C, distance : 0.1 m
Number of command positions
1
Number of indicator lights
0
Number of push buttons
0
Positive opening
With conforming to IEC 60947-5-1 appendix K
Operating travel
1.5 mm (NC changing electrical state); 2.6 mm (NO changing electrical state); 4.3 mm (total travel)
Operating force
44 N NC + NO changing electrical state
Number of selector switches
0
Mechanical durability
300000 cycles
Connections - terminals
Screw clamp terminals, = 1 x 0.22 mm² without cable end conforming to IEC 60947-1
Number of key switches
0
Tightening torque
0.8…1.2 N.m conforming to IEC 60947-1
Shape of screw head
Cross compatible with Philips no 1 screwdriver; Cross compatible with pozidriv No 1 screwdriver; Slotted compatible with flat Ø 4 mm screwdriver; Slotted compatible with flat Ø 5.5 mm screwdriver
Contacts material
Silver alloy (Ag/Ni)
Short-circuit protection
10 A cartridge fuse type gG conforming to IEC 60947-5-1
[Ith] conventional free air thermal current
10 A conforming to IEC 60947-5-1
Number of mushroom-shaped push-buttons
1
[Ui] rated insulation voltage
600 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947-1
[Ie] rated operational current
3 A at 240 V, AC-15, A600 conforming to IEC 60947-5-1; 6 A at 120 V, AC-15, A600 conforming to IEC 60947-5-1; 0.1 A at 600 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.27 A at 250 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.55 A at 125 V, DC-13, Q600 conforming to IEC 60947-5-1; 1.2 A at 600 V, AC-15, A600 conforming to IEC 60947-5-1
Electrical durability
1000000 cycles, AC-15, 2 A at 230 V, operating rate
Electrical reliability
Λ < 10exp(-6) at 5 V, 1 mA conforming to IEC 60947-5-4; Λ < 10exp(-8) at 17 V, 5 mA conforming to IEC 60947-5-4
Number of contacts as normally closed contact
1
Number of contacts as normally open contact
1
Number of contacts as change-over contact
0
Housing material
Plastic
Housing colour
Yellow
Emergency power off
Contractual warranty
Warranty (in months)
18
Environment
Protective treatment
TH
Ambient air temperature for storage
-40…70 °C
Ambient air temperature for operation
-40…70 °C
Overvoltage category
Class II conforming to IEC 60536
IP degree of protection
IP66 conforming to IEC 60529; IP67; IP69; IP69K
NEMA degree of protection
NEMA 13; NEMA 4X
IK degree of protection
IK03 conforming to IEC 62262
Standards
IEC 60947-5-4; CSA C22.2 No 14; UL 508; IEC 60947-5-5; ISO 13850; IEC 60947-5-1; JIS C 4520; IEC 60364-5-53; IEC 60947-1; IEC 60204-1
Vibration resistance
5 gn (f= 12…500 Hz) conforming to IEC 60068-2-6
Shock resistance
30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27; 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
Logistical informations
Country of origin
CZ
Main
Range of product
Harmony XALK
Product or component type
Complete control station
Device short name
XALK
Product destination
For XB5 Ø 22 mm control and signalling units
Control station application
Emergency switching off function; Emergency stop function
Colour of base of enclosure
Light grey (RAL 7035)
Colour of cover
Yellow (RAL 1021)
Material
Polycarbonate
Operator profile
1 mushroom head push-button
Operators description
Red unmarked 1 NO + 1 NC
Reset
Turn to release
Control station composition
1 mushroom head Ø 40 mm push-button, red 1 NO + 1 NC unmarked marking
Contact operation
Slow-break
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
9.700 cm
Package 1 Width
7.000 cm
Package 1 Length
7.000 cm
Package 1 Weight
170.000 g
Unit Type of Package 2
S03
Number of Units in Package 2
40
Package 2 Height
30.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
7.180 kg
Unit Type of Package 3
P06
Number of Units in Package 3
320
Package 3 Height
75.000 cm
Package 3 Width
60.000 cm
Package 3 Length
80.000 cm
Package 3 Weight
67.644 kg
The product XALK178E from Schneider Electric is a complete control station from the Harmony XALK series, specifically designed for use in industrial plants and machine building. It is an add-on housing made of polycarbonate, pre-equipped with an emergency stop switch at the factory. The unit is designed for mounting XB5 Ø 22 mm control and signaling units and serves as a secure actuation unit for emergency stop functions, including wireless emergency stop functionality. The housing features a light gray (RAL 7035) enclosure plinth design and a yellow (RAL 1021) upper section, enabling clear visual identification. Operation is performed via a red round-head pushbutton with Ø 40 mm, configured as an emergency stop switch with one normally open and one normally closed contact (1S+1Oe). Resetting is achieved via a rotary lock, ensuring secure and unambiguous positioning.
Applications
This device is intended for universal use in industry and machine building, particularly in environments where rapid and reliable shutdown is required. The robust polycarbonate construction makes it suitable for applications with high mechanical stress and in environments where cleaning processes with high-pressure washers (up to 7000000 Pa at 55 °C) are performed. The operating temperature ranges from -40 °C to +70 °C, enabling use in extreme environmental conditions. The degree of protection is not explicitly stated, but the construction is designed for use in industrial environments.
Functions and Equipment in Detail
The pushbutton is designed as a stepped switch, with an operating stroke of 1.5 mm (normally open) and 2.6 mm (normally closed), for a total stroke of 4.3 mm. The actuation force is 44 N. The contacts are made of a silver alloy (Ag/Ni), ensuring high contact reliability and low wear. The mechanical life is 300000 cycles, and the electrical life is 1000000 cycles under AC-15 operation at 2 A, 230 V. The contacts are configured as one normally open and one normally closed, with positive opening guaranteed according to IEC 60947-5-1, Annex K. Connections are made via screw terminals designed for a cable cross-section of 0.22 mm², without wire end ferrules. The tightening torque is between 0.8 and 1.2 Nm.
Technology Explained Simply
The rated insulation voltage is 600 V (pollution degree 3), and the rated impulse voltage withstand is 6 kV, confirming suitability for industrial applications with high electrical loads. The control voltage can operate on alternating current (120–600 V, 50/60 Hz) or direct current (125–600 V). The rated operating currents range from 0.1 A to 6 A, depending on voltage and load type. The overvoltage category is Class II according to IEC 60536. For short-circuit protection, a 10 A fuse type gG is specified. Electrical reliability is specified according to IEC 60947-5-4, with a failure rate of Λ < 10exp(-6) at 5 V, 1 mA and Λ < 10exp(-8) at 17 V, 5 mA.
Compatibility and Accessories
The device is designed for mounting XB5 Ø 22 mm control and signaling units. Compatible accessories include, for example, the mounting key ZB5AZ905, the illuminated emergency stop switch XALK84W3BE, the push-button ZB5AS844, and the emergency stop set XALK178W3B140E with an illuminated sign. These components allow for functional expansion, particularly regarding signaling and operability.
Mounting and Installation
Mounting is performed in enclosures or on machine fronts. The housing features a hole with Ø 22 mm and is pre-equipped at the factory. Cable entry is via a cutout for cables up to 14 mm or via two cutouts for cable glands Pg 13 and ISO M20 (0–12 mm). The screw heads are compatible with Phillips No. 1, position No. 1, as well as flat screwdrivers Ø 4 mm and Ø 5.5 mm. The coating is TH, indicating a specific surface treatment.
Operational Advantages
The unit offers high mechanical and electrical life, secure resetting via rotary lock, and clear visual identification through color coding. The use of polycarbonate ensures high mechanical stability and resistance to environmental influences. The integrated short-circuit protection fuse (10 A type gG) increases operational safety. The flexible mounting option for auxiliary switches (front or bottom mounting) allows application-specific adaptation. Compatibility with XB5 control and signaling units ensures easy integration into existing systems.