Schneider Electric SD218AU50C stepper motor drive Motion Control CANopen 5A
|
872,87 EUR 910,82 EUR |
|
|
( 1.038,72 EUR incl. VAT ) ≈ £730.59 | ≈ $959.28 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 122 workdaysinfo_outline | |
| Lieske Part No.: | 859514 |
|---|---|
| Mfg Part No: | SD218AU50C |
| UPC/EAN: | 3606480190407 |
| Weight: | 0.52 kg |
| Type: | SD218AU50C |
Product information for Schneider Electric SD218AU50C:
| Complementary | |
| Network number of phases | Single phase |
| [Us] rated supply voltage | 24...48 V |
| Supply voltage type | DC |
| Supply voltage limits | 12…48 V |
| Maximum motor phase current | 5 A |
| Voltage state 0 guaranteed | 0...0.8 V for general purpose I/O defined as inputs |
| Voltage state 1 guaranteed | 2.2...24 V |
| Input current | 1.75 mA - high level for general purpose I/O defined as inputs |
| Output current | 600 mA - single channel, duty cycle = 0.8 for general purpose I/O defined as outputs; 275 mA - four channels, continuous for general purpose I/O defined as outputs |
| Input voltage | 0...24 V for general purpose I/O defined as inputs |
| Residual ripple | 2 V at nominal voltage |
| Electrical connection | 1 connector wire crimp 4 pins for motor interface; 1 connector wire crimp 2 pins for supply voltage; 1 connector DB9 for fieldbus for CANopen interface; 1 connector wire crimp 14 pins for multifunction interface |
| Transmission rate | 10, 20, 50, 100, 125, 250, 800, 1000 kbauds |
| Type of cooling | Convection |
| Width | 76 mm |
| Height | 54 mm |
| Depth | 99 mm |
| Marking | CE |
| Net weight | 0.34 kg |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Electromagnetic compatibility | Electrostatic discharge conforming to IEC 61000-4-2; Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3; Immunity to electrical transients conforming to IEC 61000-4-4; Voltage/current impulse conforming to IEC 61000-4-5; Immunity to voltage dips conforming to IEC 61000-4-11; Immunity to conducted RF disturbances conforming to IEC 61000-4-6 |
| Standards | EN 55011 group 1 class A; IEC 61000-3-2; EN 61000-3-3 |
| Ambient air temperature for operation | 0…50 °C without derating with flange motor mounted on a steel plate 300 x 300 x 10 mm; 50…65 °C with power derating of 2.2 % per °C with flange motor mounted on a steel plate 300 x 300 x 10 mm |
| Ambient air temperature for storage | -25…70 °C |
| Relative humidity | 15…85 % without condensation |
| IP degree of protection | IP20 |
| Main | |
| Range of product | Lexium SD2 |
| Product or component type | Motion stepper drive |
| Device short name | SD218 |
| Communication interface | CANopen |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.0 cm |
| Package 1 Width | 13.4 cm |
| Package 1 Length | 19.7 cm |
| Package 1 Weight | 520.0 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 30.0 cm |
| Package 2 Width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 4.873 kg |
Questions & answers
What is the delivery time of Schneider Electric SD218AU50C stepper motor drive Motion Control CANopen 5A?
The article Schneider Electric SD218AU50C stepper motor drive Motion Control CANopen 5A is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 122 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric SD218AU50C to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric SD218AU50C stepper motor drive Motion Control CANopen 5A always at the best possible price. We can give you a discount of 2% on Schneider Electric SD218AU50C stepper motor drive Motion Control CANopen 5A if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

