Schneider Electric SD218AU50C, EAN: 3606480190407

Schneider Electric SD218AU50C stepper motor drive 5A

Industrial Material > Engines and accessories

Schneider Electric SD218AU50C stepper motor drive 5A

Lieske Part No. 859514
Mfg Part No SD218AU50C
EAN-Code 3606480190407
Manufacturer Schneider Electric
Here only 872,87 EUR
1.038,72 EUR incl. VAT

Further information for Schneider Electric SD218AU50C stepper motor drive 5A

Complementary
Network number of phasesSingle phase
[Us] rated supply voltage24...48 V
Supply voltage typeDC
Supply voltage limits12…48 V
Maximum motor phase current5 A
Voltage state 0 guaranteed0...0.8 V for general purpose I/O defined as inputs
Voltage state 1 guaranteed2.2...24 V
Input current1.75 mA - high level for general purpose I/O defined as inputs
Output current600 mA - single channel, duty cycle = 0.8 for general purpose I/O defined as outputs; 275 mA - four channels, continuous for general purpose I/O defined as outputs
Input voltage0...24 V for general purpose I/O defined as inputs
Residual ripple2 V at nominal voltage
Electrical connection1 connector wire crimp 4 pins for motor interface; 1 connector wire crimp 2 pins for supply voltage; 1 connector DB9 for fieldbus for CANopen interface; 1 connector wire crimp 14 pins for multifunction interface
Transmission rate10, 20, 50, 100, 125, 250, 800, 1000 kbauds
Type of coolingConvection
Width76 mm
Height54 mm
Depth99 mm
MarkingCE
Net weight0.34 kg
Contractual warranty
Warranty (in months)18
Environment
Electromagnetic compatibilityElectrostatic discharge conforming to IEC 61000-4-2; Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3; Immunity to electrical transients conforming to IEC 61000-4-4; Voltage/current impulse conforming to IEC 61000-4-5; Immunity to voltage dips conforming to IEC 61000-4-11; Immunity to conducted RF disturbances conforming to IEC 61000-4-6
StandardsEN 55011 group 1 class A; IEC 61000-3-2; EN 61000-3-3
Ambient air temperature for operation0…50 °C without derating with flange motor mounted on a steel plate 300 x 300 x 10 mm; 50…65 °C with power derating of 2.2 % per °C with flange motor mounted on a steel plate 300 x 300 x 10 mm
Ambient air temperature for storage-25…70 °C
Relative humidity15…85 % without condensation
IP degree of protectionIP20
Main
Range of productLexium SD2
Product or component typeMotion stepper drive
Device short nameSD218
Communication interfaceCANopen
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height9.0 cm
Package 1 Width13.4 cm
Package 1 Length19.7 cm
Package 1 Weight520.0 g
Unit Type of Package 2S03
Number of Units in Package 28
Package 2 Height30.0 cm
Package 2 Width30.0 cm
Package 2 Length40.0 cm
Package 2 Weight4.873 kg
Stepper motor drive motion control - SD218 - CANopen 5 A.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/859514
qrcode für Schneider Electric SD218AU50C stepper motor drive 5A