Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W
|
109,25 EUR 113,85 EUR |
|||||||||||
|
( 130,01 EUR incl. VAT ) ≈ £91.33 | ≈ $120.72 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 7 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 832226 | ||||||||||
| Mfg Part No: | RM35LM33MW | ||||||||||
| UPC/EAN: | 3389119405232 | ||||||||||
| Weight: | 0.134 kg | ||||||||||
| Type: | RM35LM33MW | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Switching units / measuring, control relay from Schneider ElectricFurther products in category Switching units / measuring, control relay
All products of Schneider Electric
Product information for Schneider Electric RM35LM33MW:
Harmony Control. This level relay monitors the level of conductive, non-flammable liquids (conductive measuring principle) as a limit switch. It can also be used to control liquid levels in a 2-point control during filling and emptying. For this purpose, additional conductive level electrodes are hung in the tank. The measuring principle enables the distinction between liquid and foam. Two relay changeover switches are available for reporting, which can be loaded up to 5 A. The limit value can be set for the resistance value (250 Ohm-1 MOhm) and a time delay for the relays. The settings are made using controls on the front, which can be protected against changes under a transparent cover. 3 LEDs show the device status. The wide-voltage power supply (24-240 VAC/DC) enables universal use. The cable connection is made using screw terminals.
| Complementary | |
| Reset time | 1750 ms |
| Maximum switching voltage | 250 V AC/DC |
| [Un] rated nominal voltage | 24...240 V AC/DC 50/60 Hz, non self-powered |
| Supply voltage limits | 20.4…264 V AC/DC |
| operating voltage tolerance | - 15 % + 10 % Un |
| Output contacts | 2 C/O |
| nominal output current | 5 A |
| delay at power up | 0.6 s |
| Measurement accuracy | +/- 10 % of the full scale value; +/- 20 % for the HS range |
| Repeat accuracy | +/- 2 % for time delay |
| Measurement error | 0.5 %/°C with temperature variation |
| Maximum cable distance between devices | 100 m |
| Sensitivity scale | 0.25...5 kOhm LS (Low Sensitivity); 5...100 kOhm St (Standard Sensitivity); 50...1000 kOhm HS (High Sensitivity) |
| Sensitivity adjustment | 5…100 % |
| Maximum supply current for sensors | 1 mA |
| Cable capacitance | 1 nF at HS (High Sensitivity) for probe cable; 2.2 nF at St (Standard Sensitivity) for probe cable; 4.7 nF at LS (Low Sensitivity) |
| Marking | CE : 73/23/EEC; CE : EMC 89/336/EEC |
| Overvoltage category | III conforming to IEC 60664-1 |
| Insulation resistance | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5; > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1; > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5; > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1; > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5; > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] rated insulation voltage | 250 V conforming to IEC 60664-1 |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...11 AWG) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...12 AWG) flexible with cable end |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Polycarbonate |
| Local signalling | LED (yellow) for relay ON; LED (green) for power ON; LED (yellow) for timer ON |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| Safety reliability data | B10d = 170000; MTTFd = 182.6 years |
| Width | 35 mm |
| Control type | Without test button |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Immunity to microbreaks | 100 ms DC; 90 ms AC |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Standards | IEC 60255-6 |
| Product certifications | CSA; GL; UL; C-Tick; GOST |
| Ambient air temperature for storage | -40…70 °C |
| Ambient air temperature for operation | -20…50 °C |
| Relative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5; 2 kV, 1 min AC 50 Hz conforming to IEC 60664-1 |
| Logistical informations | |
| Country of origin | ID |
| Main | |
| Range of product | Harmony Control Relays |
| Relay type | Level control relay |
| Product or component type | Level control relay |
| Relay name | RM35L |
| Relay monitored parameters | Detection by resistive probes |
| time delay | Adjustable 0.1...5 s, +/- 10 % Tt- time delay upon fault |
| Switching capacity in VA | 1250 VA |
| Minimum switching current | 10 mA at 5 V DC |
| Maximum switching current | 5 A AC/DC |
| power consumption | 5 VA AC |
| Measurement range | 250 Ohm...1 MOhm |
| Utilisation category | AC-12 conforming to IEC 60947-5-1; AC-13 conforming to IEC 60947-5-1; AC-14 conforming to IEC 60947-5-1; AC-15 conforming to IEC 60947-5-1; DC-12 conforming to IEC 60947-5-1; DC-13 conforming to IEC 60947-5-1 |
| Contacts type and composition | 2 C/O |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.400 cm |
| Package 1 Width | 7.800 cm |
| Package 1 Length | 9.500 cm |
| Package 1 Weight | 134.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 48 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.155 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 384 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 65.660 kg |
Questions & answers
What is the delivery time of Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W ?
The article Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 7 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric RM35LM33MW to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W always at the best possible price. We can give you a discount of 2% on Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W we can offer you a price of 105,15 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Schneider Electric RM79696043 level measuring probe with protective sheath
Level measuring probes for level monitors that work by means of conductivity measurement. The protective sheath is made of PUC (S7) and the electrode is made of stainless steel. Lieske Part No.: 601988 Mfg Part No: RM79696043 |
28,40 EUR 29,60 EUR
 ≈ £23.74 | ≈ $31.38
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
 |
Schneider Electric RM35LV14MW level relay for electronic sensors 24-240 V AC/DC 1 W
Harmony Control. This level relay monitors the fill level as a limit switch and can also be used to control liquid levels in a 2-point control during filling and emptying. Binary sensors or switches ... Lieske Part No.: 753479 Mfg Part No: RM35LV14MW |
125,40 EUR 130,68 EUR
≈ £104.83 | ≈ $138.57
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
Fitting accessory for Schneider Electric RM35LM33MW Level monitor 24-240 V 2 W
 |
Schneider Electric LA9RM201 Probe LA9-RM201
The LA9RM201 probe from Schneider Electric belongs to the Harmony control relay series and serves as a level control probe for measuring liquid conductivity using a conductive measurement method. It ... Lieske Part No.: 105868 Mfg Part No: LA9RM201 |
53,48 EUR 55,74 EUR
≈ £44.71 | ≈ $59.10
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
|
Schneider Electric RM79696043 level measuring probe with protective sheath
Level measuring probes for level monitors that work by means of conductivity measurement. The protective sheath is made of PUC (S7) and the electrode is made of stainless steel. Lieske Part No.: 601988 Mfg Part No: RM79696043 |
28,40 EUR 29,60 EUR
≈ £23.74 | ≈ $31.38
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
 |
Schneider Electric RM22LG11MR level relay 5 kΩ–100 kΩ 24–240 V AC/DC 1 W
Harmony Control. This level relay monitors the level of conductive, non-flammable liquids (conductive measuring principle) as a limit switch. It can also be used to control liquid levels in a 2-point ... Lieske Part No.: 633420 Mfg Part No: RM22LG11MR |
85,12 EUR 88,70 EUR
≈ £71.16 | ≈ $94.06
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric RM22LA32MR level relay 0.25 kΩ 24–240 V AC/DC time delay 2 W
Harmony Control. This level relay monitors the level of conductive, non-flammable liquids (conductive measuring principle) as a limit switch. It can also be used to control liquid levels in a 2-point ... Lieske Part No.: 633434 Mfg Part No: RM22LA32MR |
127,77 EUR 133,16 EUR
≈ £106.82 | ≈ $141.19
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
|
Schneider Electric RM35LV14MW level relay for electronic sensors 24-240 V AC/DC 1 W
Harmony Control. This level relay monitors the fill level as a limit switch and can also be used to control liquid levels in a 2-point control during filling and emptying. Binary sensors or switches ... Lieske Part No.: 753479 Mfg Part No: RM35LV14MW |
125,40 EUR 130,68 EUR
≈ £104.83 | ≈ $138.57
Made to order · Delivery time approx. 10 workdaysinfo_outline
|