Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W
|
138,70 EUR 144,54 EUR |
|||||||||||
|
( 165,05 EUR incl. VAT ) ≈ £115.95 | ≈ $153.26 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 10 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1323247 | ||||||||||
| Mfg Part No: | RM35ATL0MW | ||||||||||
| UPC/EAN: | 3389119405164 | ||||||||||
| Weight: | 0.127 kg | ||||||||||
| Type: | RM35ATL0MW | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Switching units / measuring, control relay from Schneider ElectricFurther products in category Switching units / measuring, control relay
All products of Schneider Electric
Product information for Schneider Electric RM35ATL0MW:
This monitoring relay is used for temperature monitoring in the technical rooms of elevators and lifts in accordance with EN 81. The temperature is monitored using a separate Pt100 sensor. A lower and upper limit value can be set in the temperature range +5 to +40°C. A drop-out delay for the output relay with a changeover contact can be set.
| Complementary | |
| Reset time | 8 s |
| Maximum switching voltage | 250 V AC/DC |
| [Us] rated supply voltage | 24...240 V AC/DC |
| [Un] rated nominal voltage | 24...240 V AC/DC 50/60 Hz, non self-powered |
| Supply voltage limits | 20.4…264 V AC; 21.6…264 V DC |
| Maximum power consumption in W | 0.6 W DC |
| Resistance across terminals | 1.33 kOhm at temperature |
| Width | 35 mm |
| Output contacts | 1 C/O |
| Contacts material | Cadmium free |
| nominal output current | 5 A |
| delay at power up | 0.2 s |
| Measurement accuracy | +/- 2 °C |
| Temperature probe type | Pt 100 - 3-wire |
| Installed device | Pt 100 probe cable length |
| Marking | CE : EMC 89/336/EEC; CE : 73/23/EEC |
| Overvoltage category | III conforming to IEC 60664-1 |
| Insulation resistance | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5; > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1; > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5; > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1; > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5; > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] rated insulation voltage | 250 V conforming to IEC 60664-1 |
| operating voltage tolerance | - 10 % + 10 % Un DC; - 15 % + 10 % Un AC |
| Supply frequency | 50/60 Hz +/- 10 % |
| Insulation | Galvanic insulation between supply and measurement |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...11 AWG) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...12 AWG) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Polycarbonate |
| local signalling | 1 LED green for power ON; 1 LED yellow for correct temperature (high R1); 1 LED yellow for correct temperature (low R2) |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| Control type | Without test button |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Immunity to microbreaks | 10 ms |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Standards | IEC 60255-6; NF EN 60255-6 |
| Product certifications | GOST; GL; C-Tick; UL; CSA |
| Ambient air temperature for storage | -40…70 °C |
| Ambient air temperature for operation | -20…50 °C |
| Vibration resistance | 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1; 1 gn (f= 57.6…150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV, 1 min AC 50 Hz |
| Non-dissipating shock wave | 4 kV |
| Logistical informations | |
| Country of origin | ID |
| Main | |
| Range of product | Harmony Control Relays |
| Relay type | Temperature control relays |
| Product or component type | Elevator machine room temperature control relay |
| Product specific application | For elevator machine rooms and 3-phase supplies |
| Relay name | RM35AT |
| Relay monitored parameters | Under temperature: -1...11°C; Over temperature: 34...46°C |
| Time delay range | 0.1...10 s adjustable delay (tolerance: 0...10 % of the full scale value) |
| Switching capacity in VA | 1250 VA |
| Minimum switching current | 10 mA at 5 V DC |
| Maximum power consumption in VA | 3.5 VA AC |
| Utilisation category | AC-12 conforming to IEC 60947-5-1; AC-13 conforming to IEC 60947-5-1; AC-14 conforming to IEC 60947-5-1; AC-15 conforming to IEC 60947-5-1; DC-12 conforming to IEC 60947-5-1; DC-13 conforming to IEC 60947-5-1; DC-14 conforming to IEC 60947-5-1 |
| time delay | Adjustable 1...10 s Tt- time delay upon fault |
| Measurement range | +/- 1...46 °C |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.0 cm |
| Package 1 Width | 4.6 cm |
| Package 1 Length | 9.7 cm |
| Package 1 Weight | 127.0 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 48 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 6.732 kg |
Questions & answers
What is the delivery time of Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W?
The article Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 10 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric RM35ATL0MW to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W always at the best possible price. We can give you a discount of 2% on Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W we can offer you a price of 133,50 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric RM35ATL0MW temperature monitor for technical rooms 24–240 V AC/DC 1 W
 |
Schneider Electric LA9RM201 Probe LA9-RM201
The LA9RM201 probe from Schneider Electric belongs to the Harmony control relay series and serves as a level control probe for measuring liquid conductivity using a conductive measurement method. It ... Lieske Part No.: 105868 Mfg Part No: LA9RM201 |
53,48 EUR 55,74 EUR
 ≈ £44.71 | ≈ $59.10
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
 |
Schneider Electric RM79696043 level measuring probe with protective sheath
Level measuring probes for level monitors that work by means of conductivity measurement. The protective sheath is made of PUC (S7) and the electrode is made of stainless steel. Lieske Part No.: 601988 Mfg Part No: RM79696043 |
28,40 EUR 29,60 EUR
≈ £23.74 | ≈ $31.38
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
 |
Schneider Electric TM221CE16T PLC control 16E/A transistor positive logic Ethernet
Modicon M221 PLC controller in compact format with 0.2µs / Boolean instruction for the automation of simple industrial machines. A total of 16 integrated I/Os, of which 9 are digital (5 standard with ... Lieske Part No.: 1129326 Mfg Part No: TM221CE16T |
-13% 213,81 EUR 244,72 EUR
≈ £178.75 | ≈ $236.26
Made to order · Delivery time approx. 8 workdaysinfo_outline
|