Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC
|
121,60 EUR 126,72 EUR |
|||||||||||
|
( 144,70 EUR incl. VAT ) ≈ £101.66 | ≈ $135.34 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 602206 | ||||||||||
| Mfg Part No: | RM17JC00MW | ||||||||||
| UPC/EAN: | 3389119405034 | ||||||||||
| Weight: | 0.117 kg | ||||||||||
| Type: | RM17JC00MW | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Switching units / measuring, control relay from Schneider ElectricFurther products in category Switching units / measuring, control relay
All products of Schneider Electric
Product information for Schneider Electric RM17JC00MW:
Harmony Control. This current monitoring relay has an integrated current transformer so that the line to be monitored is detected without contact. To do this, the line must be fed through the hole in the transformer. The adjustable current limit value of 2-20 A is also monitored for exceedance. A relay changer is available for reporting, which can be loaded up to 5 A. The function of the output relay can be inverted using a wire bridge. Two LEDs show the status. The width is 17.5 mm and it is mounted on the top hat rail. Supply voltage 24-240 VAC/DC (50-60 Hz).
| Complementary | |
| [Us] rated supply voltage | 24...240 V AC/DC 50/60 Hz, non self-powered |
| Supply voltage limits | 20.4…264 V AC/DC |
| Maximum power consumption in VA | 3 VA |
| Maximum power consumption in W | 1 W |
| Measurement range | 2...20 A AC |
| Maximum measuring cycle | 30 ms measurement cycle as true rms value |
| Hysteresis | 15 % fixed of threshold setting |
| Repeat accuracy | +/- 0.5 % for input and measurement circuit |
| Measurement error | +/- 0.05 %/°C with temperature variation; < 1 % over the whole range with voltage variation |
| Time delay type | Without |
| Response time | < 200 ms (in the event of a fault) |
| Power on Delay | 600 ms |
| Output contacts | 1 C/O |
| nominal output current | 5 A |
| Maximum switching voltage | 250 V AC/DC |
| Switching capacity in VA | 1250 VA |
| Minimum switching current | 10 mA at 5 V DC |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| operating voltage tolerance | - 15 % + 10 % Un |
| Control circuit frequency | 40...70 Hz sinusoidal |
| Measurement accuracy | +/- 10 % of the full scale value |
| Polarity | Yes DC |
| Threshold setting | 10...100 % |
| Input current | 100000 mA permanent at 25 °C; 300000 mA non repetitive < 3 s at 25 °C |
| Insulation | Between supply and measurement |
| Contacts material | Cadmium free |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Standards | IEC 60255-6 |
| Product certifications | GL; C-Tick; GOST; UL; CSA |
| Marking | CE : 73/23/EEC; CE : EMC 89/336/EEC |
| Ambient air temperature for storage | -40…70 °C; -40…70 °C |
| Ambient air temperature for operation | -20…50 °C |
| Relative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Overvoltage category | III conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV AC 50 Hz |
| Insulation resistance | > 500 MOhm at 500 V DC conforming to IEC 60255-5 |
| [Ui] rated insulation voltage | 400 V conforming to IEC 60664-1 |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (20 AWG...11 AWG) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (20 AWG...14 AWG) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (24 AWG...12 AWG) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (24 AWG...16 AWG) flexible with cable end |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Polycarbonate |
| Local signalling | LED (green) for power ON; LED (yellow) for relay ON |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Height | 90 mm; 88.9 mm |
| Width | 17.5 mm; 17.8 mm |
| Depth | 72 mm; 71.1 mm |
| Net weight | 0.11 kg; 0.11 kg |
| Logistical informations | |
| Country of origin | ID |
| Main | |
| Range of product | Harmony Control Relays |
| Relay type | Current control relay |
| Product or component type | Current control relay |
| Relay name | RM17JC |
| Relay monitored parameters | Overcurrent detection |
| Control type | Without test button |
| Contacts type and composition | 1 C/O |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.800 cm |
| Package 1 Width | 9.700 cm |
| Package 1 Length | 10.400 cm |
| Package 1 Weight | 117.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 32 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 4.200 kg |
Questions & answers
What is the delivery time of Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC?
The article Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric RM17JC00MW to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC always at the best possible price. We can give you a discount of 2% on Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC we can offer you a price of 117,04 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric RM17JC00MW current monitor 2–20 A, 2 W, 24–240 V AC/DC
 |
Schneider Electric RM35JA32MR monitoring for over- and undertolerance 24–240 V 2 W
Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value (1.5-15 A). You can choose between exceedance, undershoot and overshoot and ... Lieske Part No.: 632714 Mfg Part No: RM35JA32MR |
154,38 EUR 160,88 EUR
 ≈ £129.06 | ≈ $171.82
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric RM22JA21MR monitoring for overcurrent 24–240 VAC/DC 2W
Harmony Control. This current monitoring relay monitors a conductor for exceedance of the set limit value (4-1000 mA). Two relay changeovers are available for reporting, which can be loaded up to 8 A. Lieske Part No.: 633478 Mfg Part No: RM22JA21MR |
123,97 EUR 129,20 EUR
≈ £103.64 | ≈ $137.98
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric RM35JA32MW Current monitor 0.15–15 A 24–240 V 2 W
Harmony Control. This current monitoring relay monitors a conductor for exceedance or undershoot of the set limit value in the range 0.15-15 A. Two relay changeover switches are available for ... Lieske Part No.: 673020 Mfg Part No: RM35JA32MW |
139,65 EUR 145,53 EUR
≈ £116.75 | ≈ $155.43
Made to order · Delivery time approx. 20 workdaysinfo_outline
|