Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW
|
382,85 EUR 398,97 EUR |
|||||||||||
|
( 455,59 EUR incl. VAT ) ≈ £320.45 | ≈ $420.75 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline | |||||||||||
| In Stock: 1 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 307326 | ||||||||||
| Mfg Part No: | ATS01N222QN | ||||||||||
| UPC/EAN: | 3389110667318 | ||||||||||
| Weight: | 0.664 kg | ||||||||||
| Type: | ATS01N222QN | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric ATS01N222QN:
Applications
The soft starter is designed for simple machines and is used in drives such as conveyor belts, feeders, pumps, fans, and compressors. These applications benefit from reduced mechanical stress during start and stop, which extends the service life of drive components. The integrated bypass function allows the motor to operate even in the event of a starter failure, increasing the availability of the system.
Functions and Equipment in Detail
The starter operates on the principle of ramp-up with voltage ramp, whereby the voltage at the motor is gradually increased. The start time is adjustable and can be set between 1 and 10 seconds, with preset options such as 1 s / 100, 5 s / 20, or 10 s / 10 available. The deceleration time is also adjustable between 1 and 10 seconds. The Boost function enables an increased starting torque between 30 and 80 % of the starting torque achieved with direct line connection. This is particularly useful for heavy-load starts. Control is performed via digital inputs (LI1, LI2, BOOST) with a logic voltage of 24 to 40 V. Outputs include an open collector logic output (LO1) for the end of the start signal, as well as relay outputs (R1A, R1C), which are not present. The output voltage matches the supply voltage.
Technology Explained Simply
The starter reduces the voltage at the motor during startup to limit current draw. This prevents network loading and mechanical stress. The power loss during transition is 124.5 W and drops to 4.5 W at full load at the end of the start process. The integrated heatsink design ensures efficient heat dissipation. The operating position is vertical with a tolerance of ±10 degrees. The operating temperature is between -10 and 40 °C without power reduction; above 40 °C, a current reduction of 2 % per degree Celsius occurs. The storage temperature is -25 to 70 °C. The protection class IP20 protects against finger contact and solid foreign objects, but not against water or dust. The vibration resistance is 1 Gn at frequencies of 13 to 150 Hz, and the shock resistance is 15 Gn for 11 ms.
Compatibility and Accessories
The starter is compatible with various contactors, including models such as LC1D25BD, LC1D18FE7, LC1D25F7, and LC1D25V7, which can be selected based on application and control voltage. Motor protection relays such as LRD22 or LRD21, as well as motor protection switches such as GV2ME22 or GV2ME21, can be used additionally to protect the motor against overloads. Fuses such as DF2CA20 or DF2CA25 are also suitable for protecting the starter and the system.
Mounting and Installation
Mounting is carried out in accordance with EN/IEC 60947-4-2. The device is designed for vertical mounting, with a tolerance of ±10 degrees. Dimensions are 154 mm (height), 45 mm (width), and 131 mm (depth). The product weight is 0.56 kg. The ambient temperature during operation is between -10 and 40 °C, and during storage between -25 and 70 °C. The relative humidity may reach 95 % without condensation or dripping water occurring. The operating altitude is up to 1,000 m without power reduction; above this, a current reduction of 2.2 % per 100 m occurs.
Operational Advantages
The soft starter reduces mechanical stress on drive components and extends their service life. Current peaks during startup are minimized, increasing network stability. The integrated bypass function ensures high system availability. Simple commissioning and adjustable parameters allow flexible adaptation to various applications. The integrated control without external power supply reduces installation complexity. The LED indication (green for powered on, yellow for rated voltage reached) facilitates diagnostics during operation.
| Complementary | |
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 342…456 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| [Uc] Control circuit voltage | Built into the starter |
| Starting time | 1 s / 100; 5 s / 20; 10 s / 10; Adjustable from 1 to 10 s |
| Deceleration time symb | Adjustable from 1 to 10 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions |
| Discrete input voltage | 24...40 V |
| Discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and 13 V, >= 0.5 mA |
| Discrete output current | 2 A DC-13; 3 A AC-15 |
| Discrete output type | Open collector logic LO1 end of starting signal; Relay outputs R1A, R1C NO |
| Discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| Minimum switching current | 10 mA at 6 V DC for relay outputs |
| Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load; Relay outputs: 2 A at 30 kV DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Display type | 1 LED (green) for starter powered up; 1 LED (yellow) for nominal voltage reached |
| Tightening torque | 0.5 N.m; 1.9…2.5 N.m |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 154 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Net weight | 0.56 kg |
| Compatibility code | ATS01N2 |
| Power range | 7…11 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | EN/IEC 60947-4-2 |
| Product certifications | CSA; UL; CCC; C-Tick; GOST |
| IP degree of protection | IP20 |
| Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Ambient air temperature for operation | -10…40 °C (without derating); 40…50 °C (with current derating of 2 % per °C) |
| Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
| Operating altitude | 1000 m with current derating of 2.2 % per additional 100 m |
| Logistical informations | |
| Country of origin | DE |
| Main | |
| Range of product | Altistart 01 |
| Product destination | Asynchronous motors |
| Product or component type | Soft starter |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| Motor power kW | 11 kW, 3 phases at 380...415 V; 7.5 kW, 3 phases at 380...415 V |
| IcL starter rating | 22 A |
| Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption | 110 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 124.5 W in transient state; 4.5 W at full load and at end of starting |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.500 cm |
| Package 1 Width | 17.500 cm |
| Package 1 Length | 15.200 cm |
| Package 1 Weight | 664.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 14 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 9.900 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 112 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 90.588 kg |
Questions & answers
What is the delivery time of Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW?
The article Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW is currently in stock
According to our experience the article is ready for dispatch within 1 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric ATS01N222QN to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW always at the best possible price. We can give you a discount of 2% on Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW we can offer you a price of 371,36 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Schneider Electric ATS01N222LU soft starter START/STOP 22 A 200-240 V 4-5.5 kW
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a power of up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5 kW or 7.5 HP for ...Lieske Part No.: 596828 Mfg Part No: ATS01N222LU |
379,05 EUR 395,01 EUR
![]() ≈ £317.26 | ≈ $416.58
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric ATS01N222RT soft starter START/STOP 22 A 440–480 V
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a power of up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5 kW or 7.5 HP for ...Lieske Part No.: 969972 Mfg Part No: ATS01N222RT |
385,70 EUR 401,94 EUR
![]() ≈ £322.83 | ≈ $423.88
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
Fitting accessory for Schneider Electric ATS01N222QN soft starter START/STOP 22 A 380–415 V 7.5–11 kW
|
Schneider Electric GV2ME20 motor protection switch 3-pole 13-18 A push-button operation
Motor circuit breaker GV2 / GV3A simple solution to control the motor during startup and to protect: for motor feeders up to 40 kW/400Vto switch from continuous currents up to 80 ASelf Short circuit ... Lieske Part No.: 116238 Mfg Part No: GV2ME20 |
-5% 105,45 EUR 110,83 EUR
![]() ≈ £88.26 | ≈ $115.89
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1D25M7 Power contactor 11.0 kW LC1-D25M7 220 V AC
The LC1D25M7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for motor control and operation with resistive loads. It is designed for use in industrial plants ...Lieske Part No.: 119540 Mfg Part No: LC1D25M7 |
-7% 103,32 EUR 110,65 EUR
![]() ≈ £86.48 | ≈ $113.55
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D18F7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 110 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 7.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 180348 Mfg Part No: LC1D18F7 |
-7% 76,89 EUR 82,34 EUR
![]() ≈ £64.36 | ≈ $84.50
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D25P7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 230VAC
The LC1D25P7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for controlling electrical loads, particularly for motor drives and resistive loads. It features ...Lieske Part No.: 221636 Mfg Part No: LC1D25P7 |
-7% 104,30 EUR 111,69 EUR
![]() ≈ £87.30 | ≈ $114.63
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LRD22 motor protection relay 16-24A 1NO+1NC class 10A
The motor protection relay LRD22 from the TeSys Deca series by Schneider Electric provides electrical protection for motors against overload. It is designed as a thermal overload relay with ...Lieske Part No.: 242236 Mfg Part No: LRD22 |
78,09 EUR 80,74 EUR
![]() ≈ £65.36 | ≈ $85.82
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Schneider Electric LC1D18M7 Three-phase contactor 3-pole 18 A 220 V 50/60 Hz
The LC1D18M7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for controlling electrical loads, particularly for motor drives and resistive loads. It has a ...Lieske Part No.: 272611 Mfg Part No: LC1D18M7 |
-7% 85,29 EUR 91,35 EUR
![]() ≈ £71.39 | ≈ $93.73
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D18E7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 48 V 50/60 Hz
The LC1D18E7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for controlling electrical loads, particularly for motor drives and resistive loads. It features ...Lieske Part No.: 288671 Mfg Part No: LC1D18E7 |
-7% 76,20 EUR 81,60 EUR
![]() ≈ £63.78 | ≈ $83.74
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1D18BD contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 24 VDC
The LC1D18BD contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for motor control and operation of resistive loads. It is designed for use in industrial plants ...Lieske Part No.: 315531 Mfg Part No: LC1D18BD |
-7% 134,17 EUR 143,69 EUR
![]() ≈ £112.30 | ≈ $147.45
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LRD21 motor protection relay 12-18 A 1NO+1NC class 10 A
The motor protection relay LRD21 of the TeSys Deca series by Schneider Electric is a thermal overload relay with differential protection, specifically designed for protecting electric motors in ...Lieske Part No.: 376934 Mfg Part No: LRD21 |
77,71 EUR 80,35 EUR
![]() ≈ £65.04 | ≈ $85.40
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric GV2ME22 motor protection switch 3-pole 20-25 A push-button operation
Motor circuit breaker GV2 / GV3A simple solution to control the motor during startup and protect: - For motor feeders up to 40 kW/400V - To switch from continuous currents up to 80 A - Self ... Lieske Part No.: 380593 Mfg Part No: GV2ME22 |
-5% 133,95 EUR 140,78 EUR
![]() ≈ £112.12 | ≈ $147.21
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1D18P7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 230 VAC
The LC1D18P7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for motor control and operation with resistive loads. It is designed for use in industrial plants ...Lieske Part No.: 399198 Mfg Part No: LC1D18P7 |
-7% 76,20 EUR 81,60 EUR
![]() ≈ £63.78 | ≈ $83.74
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LC1D25V7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 400V 50/60Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 ...Lieske Part No.: 414070 Mfg Part No: LC1D25V7 |
-7% 105,77 EUR 113,27 EUR
![]() ≈ £88.53 | ≈ $116.24
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D25B7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 24V 50/60Hz
The LC1D25B7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for controlling motors and resistive loads. It features a main contact configuration with 3 ...Lieske Part No.: 416031 Mfg Part No: LC1D25B7 |
-7% 104,30 EUR 111,69 EUR
![]() ≈ £87.30 | ≈ $114.63
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D18BL contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 24 VDC
3-pole contactors LC1-DControl voltage 24 V DC Low Power DC 2.4 W Rated voltage 400 V to AC-3. All contactors are essentially for 2 auxiliary switches 1 NO + 1 NC. Connection: screw terminals. Lieske Part No.: 471520 Mfg Part No: LC1D18BL |
-7% 110,67 EUR 118,51 EUR
![]() ≈ £92.63 | ≈ $121.63
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric GV2ME21 motor protection switch 3-pole 17-23 A push-button operation
Motor circuit breaker GV2 / GV3 A simple solution to control the motor during startup and to protect: - for motor feeders up to 4 kW / 4 V - for switching from continuous currents up to 8 A - Self ...Lieske Part No.: 523458 Mfg Part No: GV2ME21 |
-5% 120,65 EUR 126,81 EUR
![]() ≈ £100.98 | ≈ $132.59
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1D25BD contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 24VDC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 A, coil ...Lieske Part No.: 563457 Mfg Part No: LC1D25BD |
-7% 162,57 EUR 174,11 EUR
![]() ≈ £136.07 | ≈ $178.66
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1D18FE7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 115 V 50/60 Hz
The LC1D18FE7 contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for controlling motors and resistive loads. It features a rated operational current of 18 A and ...Lieske Part No.: 582945 Mfg Part No: LC1D18FE7 |
-7% 77,27 EUR 82,75 EUR
![]() ≈ £64.67 | ≈ $84.92
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D18U7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 240 VAC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 7.5 kW, rated operating current Ie at AC-3, 400 V 18 A, ...Lieske Part No.: 582997 Mfg Part No: LC1D18U7 |
-7% 76,89 EUR 82,34 EUR
![]() ≈ £64.36 | ≈ $84.50
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D25FE7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 115V 50/60Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 A, coil ...Lieske Part No.: 583043 Mfg Part No: LC1D25FE7 |
-7% 105,77 EUR 113,27 EUR
![]() ≈ £88.53 | ≈ $116.24
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D25F7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 110V 50/60Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 ...Lieske Part No.: 587533 Mfg Part No: LC1D25F7 |
-7% 105,28 EUR 112,75 EUR
![]() ≈ £88.12 | ≈ $115.70
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D18ED contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 48 VDC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 7.5 kW, rated operating current Ie at AC-3, 400 V 18 A, ...Lieske Part No.: 627853 Mfg Part No: LC1D18ED |
-7% 136,13 EUR 145,78 EUR
![]() ≈ £113.94 | ≈ $149.61
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric DF2CA20 fuse NFC 20 A aM 10x38 mm cylindrical without indicator tropical
This is an NFC fuse cartridge for TeSys GS switch-disconnector fuse devices.Lieske Part No.: 707375 Mfg Part No: DF2CA20 |
80,08 EUR 83,46 EUR
![]() ≈ £67.03 | ≈ $88.01
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D25BL contactor 3-pole 1S+1O 11kW 400VAC3 25A 24VDC
3-pole contactors LC D-Control voltage 24 V DC with low power consumption 2.4 W DC Rated voltage 4 V, according to AC-3. All contactors are essentially for 2 auxiliary switches: S + Ö. Lieske Part No.: 740080 Mfg Part No: LC1D25BL |
-7% 152,28 EUR 163,09 EUR
![]() ≈ £127.46 | ≈ $167.36
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1D25U7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 240VAC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 A, coil ...Lieske Part No.: 764248 Mfg Part No: LC1D25U7 |
-7% 105,77 EUR 113,27 EUR
![]() ≈ £88.53 | ≈ $116.24
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D18V7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 400 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 7.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 779390 Mfg Part No: LC1D18V7 |
-7% 76,20 EUR 81,60 EUR
![]() ≈ £63.78 | ≈ $83.74
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Schneider Electric DF2CA25 fuse NFC 25 A aM 10x38 mm cylindrical without indicator tropical
This is an NFC fuse cartridge for TeSys GS switch-disconnector fuse devices.Lieske Part No.: 915634 Mfg Part No: DF2CA25 |
75,91 EUR 79,10 EUR
![]() ≈ £63.54 | ≈ $83.43
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D25ED contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 48VDC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 A, coil ...Lieske Part No.: 928631 Mfg Part No: LC1D25ED |
-7% 165,51 EUR 177,24 EUR
![]() ≈ £138.53 | ≈ $181.90
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D18B7 contactor 3-pole 1NO+1NC 7.5 kW 400 VAC3 18 A 24 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 7.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 928730 Mfg Part No: LC1D18B7 |
-7% 76,20 EUR 81,60 EUR
![]() ≈ £63.78 | ≈ $83.74
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LC1D25E7 contactor 3-pole 1NO+1NC 11kW 400VAC3 25A 48V 50/60Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 11 kW, rated operating current Ie at AC-3, 400 V 25 A, coil ...Lieske Part No.: 934349 Mfg Part No: LC1D25E7 |
-7% 104,30 EUR 111,69 EUR
![]() ≈ £87.30 | ≈ $114.63
Made to order · Delivery time approx. 7 workdaysinfo_outline
|







































