Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW
|
324,90 EUR 338,58 EUR |
|||||||||||
|
( 386,63 EUR incl. VAT ) ≈ £271.94 | ≈ $357.07 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 7 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 454692 | ||||||||||
| Mfg Part No: | ATS01N212QN | ||||||||||
| UPC/EAN: | 3389110667264 | ||||||||||
| Weight: | 0.525 kg | ||||||||||
| Type: | ATS01N212QN | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric ATS01N212QN:
| Complementary | |
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 342…456 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| [Uc] Control circuit voltage | Built into the starter |
| Starting time | Adjustable from 1 to 10 s |
| Deceleration time symb | Adjustable from 1 to 10 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions |
| Discrete input voltage | 24...40 V |
| Discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and 13 V, >= 0.5 mA |
| Discrete output current | 2 A DC-13; 3 A AC-15 |
| Discrete output type | Open collector logic LO1 end of starting signal; Relay outputs R1A, R1C NO |
| Discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| Minimum switching current | 10 mA at 6 V DC for relay outputs |
| Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load; Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Display type | 1 LED (green) for starter powered up; 1 LED (yellow) for nominal voltage reached |
| Tightening torque | 1.9…2.5 N.m; 0.5 N.m |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 124 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Net weight | 0.42 kg |
| Compatibility code | ATS01N2 |
| Power range | 4…6 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | EN/IEC 60947-4-2 |
| Product certifications | CCC; UL; GOST; CSA; C-Tick |
| IP degree of protection | IP20 |
| Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Ambient air temperature for operation | -10…40 °C (without derating); 40…50 °C (with current derating of 2 % per °C) |
| Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
| Operating altitude | 1000 m with current derating of 2.2 % per additional 100 m |
| Logistical informations | |
| Country of origin | DE |
| Main | |
| Range of product | Altistart 01 |
| Product destination | Asynchronous motors |
| Product or component type | Soft starter |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| Motor power kW | 5.5 kW, 3 phases at 380...415 V |
| IcL starter rating | 12 A |
| Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption | 60 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 4 W at full load and at end of starting; 124 W in transient state |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.500 cm |
| Package 1 Width | 15.200 cm |
| Package 1 Length | 17.500 cm |
| Package 1 Weight | 525.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 14 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 7.842 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 112 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 74.012 kg |
Questions & answers
What is the delivery time of Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW?
The article Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 7 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric ATS01N212QN to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW always at the best possible price. We can give you a discount of 2% on Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW we can offer you a price of 310,28 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric ATS01N212QN soft starter START/STOP 12 A 380–415 V 5.5 kW
|
Schneider Electric LC1D12M7 Power contactor 5.5 kW LC1-D12M7 220 V AC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 181763 Mfg Part No: LC1D12M7 |
-7% 57,78 EUR 61,87 EUR
![]() ≈ £48.36 | ≈ $63.50
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D12BL contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 24 VDC
The LC1D12BL contactor from the TeSys Deca Advanced series by Schneider Electric is a 3-pole contactor for controlling motors and resistive loads. It features integrated bidirectional peak-limiting ...Lieske Part No.: 201198 Mfg Part No: LC1D12BL |
-7% 82,46 EUR 88,31 EUR
![]() ≈ £69.02 | ≈ $90.62
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LC1D12B7 contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 24 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 325387 Mfg Part No: LC1D12B7 |
-7% 57,78 EUR 61,87 EUR
![]() ≈ £48.36 | ≈ $63.50
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric DF2CA16 fuse NFC 16 A aM 10x38 mm cylindrical without indicator tropical
This is an NFC fuse cartridge for TeSys GS switch-disconnector fuse devices.Lieske Part No.: 420289 Mfg Part No: DF2CA16 |
75,91 EUR 79,10 EUR
![]() ≈ £63.54 | ≈ $83.43
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D12FE7 contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 115 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 582841 Mfg Part No: LC1D12FE7 |
-7% 57,78 EUR 61,87 EUR
![]() ≈ £48.36 | ≈ $63.50
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D12U7 contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 240 VAC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 582856 Mfg Part No: LC1D12U7 |
-7% 57,78 EUR 61,87 EUR
![]() ≈ £48.36 | ≈ $63.50
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D12V7 contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 400 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 582860 Mfg Part No: LC1D12V7 |
-7% 58,66 EUR 62,82 EUR
![]() ≈ £49.10 | ≈ $64.47
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LR2K0321 motor protection relay 10-14 A 1NO+1NC Class 10A
Motor protection relays 0.06 -5.5 kW Thermal overload relays TeSys LR2K are extremely reliable and cover the entire motor range up to 16 A. They have a manual-automatic reset and are easy to install.Lieske Part No.: 583154 Mfg Part No: LR2K0321 |
73,63 EUR 76,13 EUR
![]() ≈ £61.63 | ≈ $80.92
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric LC1D12ED contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 48 VDC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V 12 A, ...Lieske Part No.: 671207 Mfg Part No: LC1D12ED |
-7% 105,77 EUR 113,27 EUR
![]() ≈ £88.53 | ≈ $116.24
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric LC1D12BD contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 24 VDC
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V 12 A, ...Lieske Part No.: 734538 Mfg Part No: LC1D12BD |
-7% 105,77 EUR 113,27 EUR
![]() ≈ £88.53 | ≈ $116.24
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LC1D12E7 contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 48 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 780063 Mfg Part No: LC1D12E7 |
-7% 58,27 EUR 62,41 EUR
![]() ≈ £48.77 | ≈ $64.04
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric LC1K1210P7 contactor 3-pole 1S 5.5kW 400VAC3 12A 230VAC
The LC1K1210P7 contactor from the TeSys series by Schneider Electric is a 3-pole contactor for controlling electrical loads, particularly for motor control and resistive loads. It has a rated ...Lieske Part No.: 835348 Mfg Part No: LC1K1210P7 |
-5% 53,28 EUR 56,17 EUR
![]() ≈ £44.60 | ≈ $58.55
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Schneider Electric LRD16 motor protection relay 9-13 A 1NO+1NC class 10 A
Three-pole thermal overload relay Temperature compensated with differential protection, with manual or automatic reset. Suitable for AC and DC alike. Connection: screw terminals (also available ...Lieske Part No.: 854675 Mfg Part No: LRD16 |
76,47 EUR 79,08 EUR
![]() ≈ £64.01 | ≈ $84.04
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric GV2ME16 motor protection switch 3-pole 9-14 A push-button operation
Motor circuit breaker GV2 / GV3 A simple solution to control the motor during startup and to protect: - for motor feeders up to 4 kW / 4 V - for switching from continuous currents up to 8 A - Self ...Lieske Part No.: 878789 Mfg Part No: GV2ME16 |
-5% 105,45 EUR 110,83 EUR
![]() ≈ £88.26 | ≈ $115.89
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LC1D12P7 contactor 3-pole 1S+1O 5.5 kW 400 VAC3 12 A 230 VAC
3-pole contactors LC D-Control voltage 23 V 5/6 Hz - The contactors provide basically two integrated auxiliary switches: S + NC - Connection type: Screw Motor rating AC-3: 5,5 kW Type: LCD ... Lieske Part No.: 881149 Mfg Part No: LC1D12P7 |
-7% 57,78 EUR 61,87 EUR
![]() ≈ £48.36 | ≈ $63.50
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric LC1D12F7 contactor 3-pole 1NO+1NC 5.5 kW 400 VAC3 12 A 110 V 50/60 Hz
TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO contact + 1 NC contact, rated operating power at AC-3, 400 V 5.5 kW, rated operating current Ie at AC-3, 400 V ...Lieske Part No.: 919206 Mfg Part No: LC1D12F7 |
-7% 58,66 EUR 62,82 EUR
![]() ≈ £49.10 | ≈ $64.47
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|


















