Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC
|
82,17 EUR 85,64 EUR |
|||||||||||
|
( 97,78 EUR incl. VAT ) ≈ £68.78 | ≈ $90.30 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 8 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 1327579 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | A9S65463 | ||||||||||
| UPC/EAN: | 3606480531118 | ||||||||||
| Weight: | 0.335 kg | ||||||||||
| Type: | A9S65463 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric A9S65463:
| Complementary | |
| [Ie] rated operational current | 63 A at 415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1260 A |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 6 kV |
| Control type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 8 |
| Height | 85 mm |
| Width | 72 mm |
| Depth | 73 mm |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 15000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) - |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Contact position indicator | |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | IEC 60947-3; EN 60947-3 |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Tropicalisation | 2 |
| Relative humidity | 95 % at 55 °C |
| Ambient air temperature for operation | -25…60 °C |
| Ambient air temperature for storage | -40…85 °C |
| Logistical informations | |
| Country of origin | HU |
| Main | |
| Range | Acti9 |
| Product name | Acti9 iSW |
| Product or component type | Switch disconnector |
| Device short name | iSW |
| Device application | Control; Isolation |
| Poles description | 4P |
| Utilisation category | AC-22A |
| Suitability for isolation | |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.500 cm |
| Package 1 Width | 7.000 cm |
| Package 1 Length | 9.000 cm |
| Package 1 Weight | 335.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 3 |
| Package 2 Height | 8.000 cm |
| Package 2 Width | 9.500 cm |
| Package 2 Length | 22.000 cm |
| Package 2 Weight | 1.045 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 33 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 12.050 kg |
Questions & answers
What is the delivery time of Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC?
The article Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric A9S65463 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC always at the best possible price. We can give you a discount of 2% on Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC we can offer you a price of 70,46 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Schneider Electric A9A26970 locking element Acti9 for predecessor lock
Locking element Acti 9. Pack of 10. For padlocks.Lieske Part No.: 530810 Mfg Part No: A9A26970 |
52,53 EUR 54,75 EUR
![]() ≈ £43.97 | ≈ $57.73
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other.Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
![]() ≈ £13.12 | ≈ $17.22
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC
Acti 9 iSW load-break switch. 2-pole, nominal current 100A, operating voltage (Ue) 415V AC, insulation voltage (Ui) 500V AC. Opening and closing of circuits under load. Clear switch position ...Lieske Part No.: 557885 Mfg Part No: A9S65291 |
129,20 EUR 134,64 EUR
![]() ≈ £108.14 | ≈ $141.99
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26976 terminal cover 2-pole 36 mm for iC60 ilD Reflex iC60
The terminal cover A9A26976 from Schneider Electric is an insulation accessory for the Acti9 product family, specifically designed for 2-pole switches of the iC60, iID, and Reflex iC60 series. It ...Lieske Part No.: 929622 Mfg Part No: A9A26976 |
24,70 EUR 25,74 EUR
![]() ≈ £20.67 | ≈ $27.15
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26904 auxiliary contact Acti9 iOF 100 mA at 6 A 24 VAC at 415 VAC 24–130 VDC
The auxiliary switch A9A26904 from the Acti9 product range by Schneider Electric is an auxiliary switch OF (iOF) for visual or electrical indication of the operating position of a circuit breaker. It ...Lieske Part No.: 1104013 Mfg Part No: A9A26904 |
27,69 EUR 28,86 EUR
![]() ≈ £23.18 | ≈ $30.43
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26914 auxiliary contact Acti9 iOF 2 mA to 100 mA 24 VAC to 250 VAC 24 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to ...Lieske Part No.: 1104015 Mfg Part No: A9A26914 |
29,21 EUR 30,44 EUR
![]() ≈ £24.45 | ≈ $32.10
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9S65440 switch disconnector iSW 4-pole 40 A 240 V AC
Acti 9 iSW load-break switch. 4-pole, nominal current 40A, operating voltage (Ue) 415V AC, insulation voltage (Ui) 500V AC. Opening and closing of circuits under load. Clear switch position indication ...Lieske Part No.: 1327568 Mfg Part No: A9S65440 |
81,98 EUR 85,44 EUR
![]() ≈ £68.62 | ≈ $90.10
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27003 plug socket for iC60 1-pole 18 mm
Acti 9 plug-in socket for iC60. 1-pole, 18mm. Allows circuit breakers to be replaced quickly and without tools.Lieske Part No.: 1768717 Mfg Part No: A9A27003 |
48,55 EUR 50,59 EUR
![]() ≈ £40.64 | ≈ $53.36
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27001 phase disconnector for iC60 ilD Reflex
The product A9A27001 from Schneider Electric is a phase separator from the Acti9 product series, specifically designed for use in control panels with devices from the product families iC60, iID and ...Lieske Part No.: 1768718 Mfg Part No: A9A27001 |
17,72 EUR 18,46 EUR
![]() ≈ £14.83 | ≈ $19.47
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9S65191 switch disconnector iSW 1-pole 100 A 240 V AC
Acti 9 iSW load-break switch. 1-pole, nominal current 100A, operating voltage (Ue) 240V AC, insulation voltage (Ui) 250V AC. Opening and closing of circuits under load. Clear switch position ...Lieske Part No.: 1856549 Mfg Part No: A9S65191 |
62,70 EUR 65,34 EUR
![]() ≈ £52.48 | ≈ $68.91
Made to order · Delivery time approx. 21 workdaysinfo_outline
|
Fitting accessory for Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC
|
Schneider Electric A9A26970 locking element Acti9 for predecessor lock
Locking element Acti 9. Pack of 10. For padlocks.Lieske Part No.: 530810 Mfg Part No: A9A26970 |
52,53 EUR 54,75 EUR
![]() ≈ £43.97 | ≈ $57.73
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other.Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
![]() ≈ £13.12 | ≈ $17.22
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XPH412 phase bar strip 4-pole 12 TE cuttable 100 A
Phase busbar Steg Acti 9. 4-pole, can be cut to length, 12TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ...Lieske Part No.: 543278 Mfg Part No: A9XPH412 |
30,02 EUR 31,28 EUR
![]() ≈ £25.13 | ≈ $32.99
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XPH424 phase bar strip 4-pole 24 TE cuttable 100 A
Phase busbar Steg Acti 9. 4-pole, can be cut to length, 24TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ...Lieske Part No.: 543284 Mfg Part No: A9XPH424 |
46,50 EUR 48,46 EUR
![]() ≈ £38.92 | ≈ $51.10
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XPH457 phase busbar strip 4-pole 57 TE cuttable 100 A
Phase busbar Steg Acti 9. 4-pole, can be cut to length, 57TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ...Lieske Part No.: 543286 Mfg Part No: A9XPH457 |
119,22 EUR 124,25 EUR
![]() ≈ £99.79 | ≈ $131.02
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XAH457 phase busbar strip 4-pole + auxiliary switch 57 TE adjustable 100 A
Quantity: 5 ST.Lieske Part No.: 561299 Mfg Part No: A9XAH457 |
104,41 EUR 108,80 EUR
![]() ≈ £87.39 | ≈ $114.75
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 19091 multiple connection terminals (4 pcs)
The multi-connection terminals 19091 from Schneider Electric are specifically designed for use with circuit breakers from the ComPacT INS product family. These are terminals for secure and reliable ...Lieske Part No.: 592891 Mfg Part No: 19091 |
136,80 EUR 142,56 EUR
![]() ≈ £114.50 | ≈ $150.34
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric A9S65491 switch disconnector iSW 4-pole 100 A 240 V AC
Acti 9 iSW load-break switch. 4-pole, nominal current 100A, operating voltage (Ue) 415V AC, insulation voltage (Ui) 500V AC. Opening and closing of circuits under load. Clear switch position ...Lieske Part No.: 612083 Mfg Part No: A9S65491 |
262,20 EUR 273,24 EUR
![]() ≈ £219.46 | ≈ $288.16
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26976 terminal cover 2-pole 36 mm for iC60 ilD Reflex iC60
The terminal cover A9A26976 from Schneider Electric is an insulation accessory for the Acti9 product family, specifically designed for 2-pole switches of the iC60, iID, and Reflex iC60 series. It ...Lieske Part No.: 929622 Mfg Part No: A9A26976 |
24,70 EUR 25,74 EUR
![]() ≈ £20.67 | ≈ $27.15
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27008 rotary drive iC60 without handle
The product A9A27008 from Schneider Electric is a rotary handle mechanism, specifically designed for the ISW 40–125, IC60, ISW-NA, and IID series. It is an operating accessory used as a rotary drive ...Lieske Part No.: 932377 Mfg Part No: A9A27008 |
124,45 EUR 129,69 EUR
![]() ≈ £104.16 | ≈ $136.77
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26914 auxiliary contact Acti9 iOF 2 mA to 100 mA 24 VAC to 250 VAC 24 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to ...Lieske Part No.: 1104015 Mfg Part No: A9A26914 |
29,21 EUR 30,44 EUR
![]() ≈ £24.45 | ≈ $32.10
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27005 rotary operator iC60 handle black
The product A9A27005 from Schneider Electric is a rotary drive for the Acti 9 series, specifically designed for operating power switches and disconnectors of types iC60, iC60 + Vigi, iC60 iID, as well ...Lieske Part No.: 1768716 Mfg Part No: A9A27005 |
142,41 EUR 148,40 EUR
![]() ≈ £119.20 | ≈ $156.51
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27003 plug socket for iC60 1-pole 18 mm
Acti 9 plug-in socket for iC60. 1-pole, 18mm. Allows circuit breakers to be replaced quickly and without tools.Lieske Part No.: 1768717 Mfg Part No: A9A27003 |
48,55 EUR 50,59 EUR
![]() ≈ £40.64 | ≈ $53.36
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27001 phase disconnector for iC60 ilD Reflex
The product A9A27001 from Schneider Electric is a phase separator from the Acti9 product series, specifically designed for use in control panels with devices from the product families iC60, iID and ...Lieske Part No.: 1768718 Mfg Part No: A9A27001 |
17,72 EUR 18,46 EUR
![]() ≈ £14.83 | ≈ $19.47
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27006 rotary drive iC60 handle red
The article A9A27006 from Schneider Electric is a rotary drive for the iC60 series, specifically designed as control accessory for power switches and disconnectors. It serves for mechanical actuation ...Lieske Part No.: 1768855 Mfg Part No: A9A27006 |
133,47 EUR 139,10 EUR
![]() ≈ £111.71 | ≈ $146.68
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 19096 3xmultiple connection terminals set=3 pcs
Multiple cable clamps for NG125. Tightening torque 2Nm, stripping length 11mm. Connection terminals for 3 copper conductors. Rigid up to 16mm², flexible up to 10mm². Pack of 3 per bag.Lieske Part No.: 1774531 Mfg Part No: 19096 |
126,35 EUR 131,67 EUR
![]() ≈ £105.75 | ≈ $138.86
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
|
Schneider Electric A9XPH408 phase bar strip 4P 8Mod. 100A
Phase busbar, can be cut to length, 3P+N, 8 TE, 100A.Lieske Part No.: 1865830 Mfg Part No: A9XPH408 |
23,46 EUR 24,45 EUR
![]() ≈ £19.64 | ≈ $25.78
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XPH416 phase bar strip 4P 16 mod. 100 A
Phase busbar, can be cut to length, 3P+N, 16TE, 100A.Lieske Part No.: 1865831 Mfg Part No: A9XPH416 |
191,66 EUR 199,73 EUR
![]() ≈ £160.42 | ≈ $210.63
Made to order · Delivery time approx. 8 workdaysinfo_outline
|























