Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC
|
129,20 EUR 134,64 EUR |
|||||||||||
|
( 153,75 EUR incl. VAT ) ≈ £107.75 | ≈ $144.32 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 557885 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | A9S65291 | ||||||||||
| UPC/EAN: | 3606480531132 | ||||||||||
| Weight: | 0.167 kg | ||||||||||
| Type: | A9S65291 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Cam switch / power switch from Schneider ElectricFurther products in category Cam switch / power switch
All products of Schneider Electric
Product information for Schneider Electric A9S65291:
Acti 9 iSW load-break switch. 2-pole, nominal current 100A, operating voltage (Ue) 415V AC, insulation voltage (Ui) 500V AC. Opening and closing of circuits under load. Clear switch position indication by green marking on the device's switch knob. Additional auxiliary modules that can be added in series (optional): auxiliary switch for status reporting (iOF). Tool-free installation on the left side of the device. Color RAL 9003. The iSW load-break switch meets the following standards: IEC/EN 60947-3.
| Complementary | |
| [Ie] rated operational current | 100 A at 415 V AC 50/60 Hz |
| [Ue] rated operational voltage | 415 V AC 50/60 Hz |
| [Icm] rated short-circuit making capacity | 5 kA switch-disconnector alone |
| [Icw] rated short-time withstand current | 1500 A |
| [Ui] rated insulation voltage | 500 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 6 kV |
| Control type | Toggle |
| Local signalling | ON/OFF indication |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| Comb busbar and distribution block compatibility | Top or bottom: YES |
| 9 mm pitches | 4 |
| Height | 85 mm |
| Width | 36 mm |
| Depth | 73 mm |
| Colour | White |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Connections - terminals | Tunnel type terminals (top or bottom) - |
| Wire stripping length | 14 mm |
| Tightening torque | 3.5 N.m |
| Contact position indicator | |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | IEC 60947-3; EN 60947-3 |
| IP degree of protection | IP20 |
| Pollution degree | 3 |
| Tropicalisation | 2 |
| Relative humidity | 95 % at 55 °C |
| Ambient air temperature for operation | -25…60 °C |
| Ambient air temperature for storage | -40…85 °C |
| Logistical informations | |
| Country of origin | HU |
| Main | |
| Range | Acti9 |
| Product name | Acti9 iSW |
| Product or component type | Switch disconnector |
| Device short name | iSW |
| Device application | Isolation; Control |
| Poles description | 2P |
| Utilisation category | AC-22A |
| Suitability for isolation | |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.600 cm |
| Package 1 Width | 7.500 cm |
| Package 1 Length | 9.500 cm |
| Package 1 Weight | 167.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 8.500 cm |
| Package 2 Width | 10.000 cm |
| Package 2 Length | 22.000 cm |
| Package 2 Weight | 1.060 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 66 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 12.147 kg |
Questions & answers
What is the delivery time of Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC?
The article Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric A9S65291 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC always at the best possible price. We can give you a discount of 2% on Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC we can offer you a price of 120,48 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Schneider Electric A9A26970 locking element Acti9 for predecessor lock
Locking element Acti 9. Pack of 10. For padlocks. Lieske Part No.: 530810 Mfg Part No: A9A26970 |
52,53 EUR 54,75 EUR
 ≈ £43.81 | ≈ $58.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other. Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
≈ £13.07 | ≈ $17.50
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26976 terminal cover 2-pole 36 mm for iC60 ilD Reflex iC60
Klemmenabdeckung Acti 9. 2-polig, 36mm. Verhindert den vollständigen Kontakt mit den Anschlussklemmen. Für iC60, iID, Reflex iC60. Lieske Part No.: 929622 Mfg Part No: A9A26976 |
24,70 EUR 25,74 EUR
≈ £20.60 | ≈ $27.59
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26904 auxiliary contact Acti9 iOF 100 mA at 6 A 24 VAC at 415 VAC 24–130 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at ... Lieske Part No.: 1104013 Mfg Part No: A9A26904 |
27,69 EUR 28,86 EUR
≈ £23.09 | ≈ $30.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A26914 auxiliary contact Acti9 iOF 2 mA to 100 mA 24 VAC to 250 VAC 24 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to ... Lieske Part No.: 1104015 Mfg Part No: A9A26914 |
29,21 EUR 30,44 EUR
≈ £24.36 | ≈ $32.63
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A27005 rotary operator iC60 handle black
Acti 9 rotary actuator for iC60. Black handle. Rotary actuator for front or side operation. Lieske Part No.: 1768716 Mfg Part No: A9A27005 |
142,41 EUR 148,40 EUR
≈ £118.77 | ≈ $159.07
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A27001 phase disconnector for iC60 ilD Reflex
Phase separator Acti 9. For better separation of individual connections. For iC60, iID, Reflex iC60. Lieske Part No.: 1768718 Mfg Part No: A9A27001 |
17,72 EUR 18,46 EUR
≈ £14.78 | ≈ $19.79
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A27006 rotary drive iC60 handle red
Acti 9 rotary actuator for iC60. Red handle. Rotary actuator for front or side operation. Lieske Part No.: 1768855 Mfg Part No: A9A27006 |
133,47 EUR 139,10 EUR
≈ £111.31 | ≈ $149.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for Schneider Electric A9S65291 switch disconnector iSW 2-pole 100 A 240 V AC
|
|
Schneider Electric A9A26970 locking element Acti9 for predecessor lock
Locking element Acti 9. Pack of 10. For padlocks. Lieske Part No.: 530810 Mfg Part No: A9A26970 |
52,53 EUR 54,75 EUR
≈ £43.81 | ≈ $58.68
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other. Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
≈ £13.07 | ≈ $17.50
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9XPH557 phase bar strip 3-pole+N 57TE adjustable 100A
Phase busbar Steg Acti 9. 3-pole+N, can be cut to length, 57TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ... Lieske Part No.: 541625 Mfg Part No: A9XPH557 |
123,97 EUR 129,20 EUR
≈ £103.39 | ≈ $138.47
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Schneider Electric 19091 multiple connection terminals (4 pcs)
Multiple cable clamps for NG125. Tightening torque 2Nm, stripping length 11mm. Connection terminals for 3 copper conductors. Rigid up to 16mm², flexible up to 10mm². PU - 4 pieces per bag. Lieske Part No.: 592891 Mfg Part No: 19091 |
136,80 EUR 142,56 EUR
≈ £114.09 | ≈ $152.81
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26946 load current release iMX+OF 220-415 VAC/110-130 VDC
Acti 9 iMX+OF shunt release. Operating voltage (Ue) 220-415V AC, 110-130V DC. Remote tripping of a circuit breaker or residual current device when a voltage is applied to the coil contacts. Restarting ... Lieske Part No.: 611855 Mfg Part No: A9A26946 |
74,67 EUR 77,81 EUR
≈ £62.27 | ≈ $83.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26948 current release iMX+OF 12-24 V AC/DC
Acti 9 iMX+OF shunt release. Operating voltage (Ue) 12-24V AC, 12-24V DC. Remote tripping of a circuit breaker or residual current device when a voltage is applied to the coil contacts. Restarting is ... Lieske Part No.: 611859 Mfg Part No: A9A26948 |
74,67 EUR 77,81 EUR
≈ £62.27 | ≈ $83.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26960 undervoltage release iMN 220-240 VAC 50/60 Hz
Undervoltage release Acti 9 iMN. Operating voltage (Ue) 220-240V AC. Causes the associated circuit breaker to trip when the voltage drops. Prevents the circuit breaker from closing until the supply ... Lieske Part No.: 611860 Mfg Part No: A9A26960 |
94,91 EUR 98,90 EUR
≈ £79.15 | ≈ $106.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26969 undervoltage release iMNx 220-240 VAC 50/60 Hz emergency stop
Undervoltage release Acti 9 iMNs for emergency stop circuits. Operating voltage (Ue) 220-240V AC. Causes the associated circuit breaker to trip when the voltage drops. Prevents the circuit breaker ... Lieske Part No.: 612677 Mfg Part No: A9A26969 |
161,41 EUR 168,20 EUR
≈ £134.62 | ≈ $180.29
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
 |
Schneider Electric A9XPH212 phase busbar strip 2-pole 12 TE cuttable 100 A
Phase busbar Steg Acti 9. 2-pole, can be cut to length, 12TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ... Lieske Part No.: 612743 Mfg Part No: A9XPH212 |
16,77 EUR 17,47 EUR
≈ £13.99 | ≈ $18.73
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9XPH257 phase bar strip 2-pole 57 TE cuttable 100 A
Phase busbar Steg Acti 9. 2-pole, can be cut to length, 57TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ... Lieske Part No.: 612745 Mfg Part No: A9XPH257 |
61,94 EUR 64,55 EUR
≈ £51.66 | ≈ $69.19
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9XPH524 phase bar strip 3-pole+N 24TE adjustable 100A
Phase busbar Steg Acti 9. 3-pole+N, can be cut to length, 24TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ... Lieske Part No.: 612747 Mfg Part No: A9XPH524 |
55,00 EUR 57,32 EUR
≈ £45.87 | ≈ $61.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9XAH257 phase bar strip 2-pole+auxiliary switch 57TE adjustable 100A
Phasenschiene Steg Acti 9. 2-polig+Hilfsschalter, ablängbar, 57TE, Nennstrom 100A, Nennspannung 415V AC, Isolationsspannung (Ui) 500V. Farbton RAL 7016. Lieske Part No.: 925941 Mfg Part No: A9XAH257 |
59,66 EUR 62,17 EUR
≈ £49.76 | ≈ $66.64
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A26976 terminal cover 2-pole 36 mm for iC60 ilD Reflex iC60
Klemmenabdeckung Acti 9. 2-polig, 36mm. Verhindert den vollständigen Kontakt mit den Anschlussklemmen. Für iC60, iID, Reflex iC60. Lieske Part No.: 929622 Mfg Part No: A9A26976 |
24,70 EUR 25,74 EUR
≈ £20.60 | ≈ $27.59
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A27008 rotary drive iC60 without handle
Drehantrieb Acti 9 für iC60. Ohne Griff. Drehantrieb für frontseitige oder seitliche Betätigung. Lieske Part No.: 932377 Mfg Part No: A9A27008 |
124,45 EUR 129,69 EUR
≈ £103.79 | ≈ $139.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A26917 telecommunication switch Acti9 iSD 1We2mA up to 100mA 24VAC up to 250VAC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current is between 2mA and 100mA ... Lieske Part No.: 1104000 Mfg Part No: A9A26917 |
44,32 EUR 46,18 EUR
≈ £36.96 | ≈ $49.51
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A26904 auxiliary contact Acti9 iOF 100 mA at 6 A 24 VAC at 415 VAC 24–130 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at ... Lieske Part No.: 1104013 Mfg Part No: A9A26904 |
27,69 EUR 28,86 EUR
≈ £23.09 | ≈ $30.93
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A26914 auxiliary contact Acti9 iOF 2 mA to 100 mA 24 VAC to 250 VAC 24 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to ... Lieske Part No.: 1104015 Mfg Part No: A9A26914 |
29,21 EUR 30,44 EUR
≈ £24.36 | ≈ $32.63
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A26907 auxiliary contact remote switch Acti9 iSD 1We 100 mA to 6 A
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current from 100mA to 6A at a ... Lieske Part No.: 1104020 Mfg Part No: A9A26907 |
42,23 EUR 44,01 EUR
≈ £35.22 | ≈ $47.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26500 overvoltage release iMSU 230 V AC
Surge release Acti 9 iMSU. Operating voltage (Ue) 230V AC, insulation voltage (Ui) 400V. A circuit breaker or residual current device is triggered when the mains voltage exceeds a defined value. The ... Lieske Part No.: 1326265 Mfg Part No: A9A26500 |
127,77 EUR 133,16 EUR
≈ £106.56 | ≈ $142.72
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9S65463 switch disconnector iSW 4-pole 63 A 240 VAC
Acti 9 iSW load-break switch. 4-pole, nominal current 63A, operating voltage (Ue) 415V AC, insulation voltage (Ui) 500V AC. Opening and closing of circuits under load. Clear switch position indication ... Lieske Part No.: 1327579 Mfg Part No: A9S65463 |
82,17 EUR 85,64 EUR
≈ £68.53 | ≈ $91.78
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26478 load current release iMX 12-24 V AC/DC
Acti 9 iMX shunt release. Operating voltage (Ue) 12-24V AC, 12-24V DC, insulation voltage (Ui) 400V. Remote tripping of a circuit breaker or residual current device when a voltage is applied to the ... Lieske Part No.: 1329649 Mfg Part No: A9A26478 |
53,48 EUR 55,74 EUR
≈ £44.60 | ≈ $59.74
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9XAH557 phase busbar strip 3p+N+auxiliary switch 57TE adjustable 100A
Phase busbar Steg Acti 9. 3-pole+N+auxiliary switch, can be cut to length, 57TE, rated current 100A, rated voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. Lieske Part No.: 1767305 Mfg Part No: A9XAH557 |
108,30 EUR 112,86 EUR
≈ £90.32 | ≈ $120.97
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26959 undervoltage release iMN 115 V AC 400 Hz
Undervoltage release Acti 9 iMN. Operating voltage (Ue) 115V AC. Causes the associated circuit breaker to trip when the voltage drops. Prevents the circuit breaker from closing until the supply ... Lieske Part No.: 1768698 Mfg Part No: A9A26959 |
119,22 EUR 124,25 EUR
≈ £99.43 | ≈ $133.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A27005 rotary operator iC60 handle black
Acti 9 rotary actuator for iC60. Black handle. Rotary actuator for front or side operation. Lieske Part No.: 1768716 Mfg Part No: A9A27005 |
142,41 EUR 148,40 EUR
≈ £118.77 | ≈ $159.07
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A27001 phase disconnector for iC60 ilD Reflex
Phase separator Acti 9. For better separation of individual connections. For iC60, iID, Reflex iC60. Lieske Part No.: 1768718 Mfg Part No: A9A27001 |
17,72 EUR 18,46 EUR
≈ £14.78 | ≈ $19.79
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26963 undervoltage release iMNs 220-240 V AC 50/60 Hz delayed
Undervoltage release Acti 9 iMNs. Operating voltage (Ue) 220-240V AC, delayed. Causes the associated circuit breaker to trip when the voltage drops. Prevents the circuit breaker from closing until the ... Lieske Part No.: 1768719 Mfg Part No: A9A26963 |
133,47 EUR 139,10 EUR
≈ £111.31 | ≈ $149.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26961 undervoltage release iMN 48 VAC 50/60 Hz
Undervoltage release Acti 9 iMN. Operating voltage (Ue) 48V AC. Causes the associated circuit breaker to trip when the voltage drops. Prevents the circuit breaker from closing until the supply voltage ... Lieske Part No.: 1768720 Mfg Part No: A9A26961 |
94,91 EUR 98,90 EUR
≈ £79.15 | ≈ $106.01
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26947 load current release iMX+OF 48 V AC/DC
Acti 9 iMX+OF shunt release. Operating voltage (Ue) 48V AC, 48V DC. Remote tripping of a circuit breaker or residual current device when a voltage is applied to the coil contacts. Restarting is only ... Lieske Part No.: 1768721 Mfg Part No: A9A26947 |
74,67 EUR 77,81 EUR
≈ £62.27 | ≈ $83.41
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9A26476 load current release iMX 100-415 VAC 110-130 VDC
Acti 9 iMX shunt release. Operating voltage (Ue) 100-130V DC, insulation voltage (Ui) 400V. Remote tripping of a circuit breaker or residual current device when a voltage is applied to the coil ... Lieske Part No.: 1768722 Mfg Part No: A9A26476 |
53,48 EUR 55,74 EUR
≈ £44.60 | ≈ $59.74
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9XPH518 phase busbar strip 3p+N 18 TE cuttable 100 A
Phase busbar Steg Acti 9. 3-pole+N, can be cut to length, 18TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ... Lieske Part No.: 1768799 Mfg Part No: A9XPH518 |
49,12 EUR 51,18 EUR
≈ £40.97 | ≈ $54.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
|