Schneider Electric A9MEM1570 Power Tag Flex 3P+n content_copy

The PowerTag Energy F63 3P+N is a wirelessly communicating energy meter. With its flexible design, it is suitable for 3P+N measuring points with a nominal power of 63A or less. The energy meter must be connected to a concentrator or a gateway. It is specially designed for energy management, load monitoring and availability applications. It includes accurate real-time measurements of active energy, active power, current, voltage and power factor. With 2 quadrant energy measurement. In case of a power failure, it sends a voltage loss alarm and the value of the current per phase before being switched off. PowerTag Energy 63A complies with the IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The accuracy class is Class 1. The Imax maximum current is 63A. The Ib base current is 10A. The saturation current is 130A and the actual inrush current is 40mA. The Un rated voltage is phase-neutral 220VAC to 240VAC +/- 20% and phase-phase 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2VA. It can be mounted either on the top or bottom of the protective device. The product color is white (RAL9003). The weight is 40 g. The protection class is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C.

Additional features
Form factor	Flex
Mounting mode	By screws (clamps)
Electrical connection (voltage sensing & power supply)	Wires with cable ends
Cable cross-section	1 fixed cable 1.5…16 mm²; 2 stranded cable 1.5…2.5 mm²; 2 fixed cable 1.5…2.5 mm²; 1 stranded cable 1.5…16 mm²
Cable length	0,25 m
Supply voltage	220 - 240 V AC, ± 20 %, between phase and neutral; 380 - 415 V AC, ± 20 %, between phases
Network frequency	50 Hz; 60 Hz
Maximum power consumption	2 VA
Standards	IEC 61557-12; IEC 61010-1; IEC 61010-2-030; IEC 61326-1; ETSI EN 300 328; ETSI EN 301 489-1
Product certifications	IEC; DNV Marine
Height	Sensor element: 20 mm
Width	Sensor element: 54 mm
Depth	Sensor element: 46.6 mm
Product weight	40 g
Colour	White (RAL 9003)
Compatibility code	PowerTag A9 P63
Contractual warranty
Warranty (in months)	18
Main features
Product series	PowerLogic
Product name	PowerTag A9 F63
Product or component type	Energy sensor
Poles	3P + N
[Imax] max. current	63 A
[Ib] base current	10 A
Input current	40 mA
Saturation current	130 A
Product-specific application	cost allocation; load monitoring; overload alarm; circuit monitoring; energy management
Concentrator compatibility	Panel Server Entry; Panel Server Universal; Panel Server Advanced; Harmony Hub; Wiser hub Generation 2; Acti 9 Smartlink SI B; Acti 9 Smartlink SI D; Acti 9 PowerTag Link; Acti 9 PowerTag Link HD
Application	Building: power circuit breaker voltage monitoring; Building: cost allocation; Building: overload alarm
Compatible product family	Acti9 Vigi DT40; Acti9 Vigi iC40; Acti9 Vigi iDT40; Acti9 Vigi N40; Acti9 Vigi C40; Acti9 Vigi iC60; Acti9 Acti9 iDD40; Acti9 Acti9 iDD40 XA; Acti9 Acti9 iCV40 XA; Acti9 Vigi iDPN; Acti9 Acti9 iCV40; Acti9 Vigi iTG40; Acti9 Vigi iCG40
Measured value type	Voltage; Active energy; Active power; Current; Power factor
Accuracy class	Class 1 current corresponds to IEC 61557-12; Class 0.5 voltage corresponds to IEC 61557-12; Class 1 active power corresponds to IEC 61557-12; Class 1 active energy corresponds to IEC 61557-12; Class 1 power factor corresponds to IEC 61557-12
Mounting location	Top or bottom
Mounting bracket	for circuit breaker
Product application	Switchgear
Event management	Voltage drop with measured current during voltage drop
Transmission medium	Radio frequency 2.4…2.4835 GHz corresponds to IEEE 802.15.4
Transmit power	10 mW
Mounting
Conformity marking	CE
Policies	2014/53/EU - Radio Equipment Directive
Operating altitude	0 - 2.000 m
Operating ambient temperature	-25…60 °C
Ambient temperature during storage	-40…85 °C
Over voltage category	III corresponds to IEC 61010-1
Measurement category	Category III corresponds to IEC 61010-2-030
Degree of protection (IP)	IP20 complies with IEC 60529
Degree of protection (IK)	IK05
Pollution degree	3
Relative humidity	0…95 % at 45 °C corresponds to IEC 60721-3-3
Vibration resistance	3M4 corresponds to IEC 60721-3-3
Electromagnetic compatibility	Industrial electromagnetic environment complies with IEC 61326-1; Radiated disturbances comply with ETSI EN 301 489-17; Electromagnetic emission complies with IEC 62311
Environmental properties	dust resistant Class 3S3 corresponds to IEC 60721-3-3; salt fog Class 3C2 corresponds to IEC 60721-3-3; for indoor use
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	5,000 cm
VPE 1 width	6,000 cm
VPE 1 length	8,500 cm
Packaging weight (Lbs)	68,000 g
VPE 2 type	S02
VPE 2 quantity	48
VPE 2 height	15,000 cm
VPE 2 width	30,000 cm
VPE 2 length	40,000 cm
VPE 2 weight	3,625 kg

---