Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA
|
162,45 EUR 169,29 EUR |
|||||||||||
|
( 193,32 EUR incl. VAT ) ≈ £135.97 | ≈ $178.53 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 8 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 932499 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | A9F90310 | ||||||||||
| UPC/EAN: | 3606480085987 | ||||||||||
| Weight: | 0.375 kg | ||||||||||
| Type: | A9F90310 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Schneider Electric A9F90310:
| Additional features | |
| Network frequency | 50/60 Hz |
| [Ue] Operational rated voltage | 220 - 240 V AC 50/60 Hz; 380 - 415 V AC 50/60 Hz; 440 V AC 50/60 Hz |
| Magnetic trip threshold | 12 x inch +/-20 % |
| Breaking capacity | 40 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 20 kA Icu at 380 - 415 V AC 50/60 Hz complies with EN/IEC 60947-2; 15 kA Icu at 440 V AC 50/60 Hz complies with EN/IEC 60947-2 |
| Rated switching-off capacity Ics | 20 kA 50 % x Icu at 220 - 240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 10 kA 50 % x Icu at 380 - 415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 7.5 kA 50 % x Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2 |
| [Ui] Rated insulation voltage | 500 V AC 50/60 Hz corresponds to EN/IEC 60947-2 |
| [Uimp] Rated impulse voltage withstand | 6 kV corresponds to EN/IEC 60947-2 |
| Control type | Toggle switch |
| Local signalling | trip indicator |
| Mounting mode | Plug-on; Removable comb rail installed |
| Mounting bracket | 35 mm DIN rail |
| Compatibility of comb rails and distribution blocks | Top or bottom: yes |
| Terminal pitch | 18 mm between phases |
| 9-mm pitch | 6 |
| Height | 85 mm |
| Width | 54 mm |
| Depth | 78,5 mm |
| Product weight | 0,375 kg |
| Colour | White |
| Mechanical life | 20000 cycles |
| Electrical lifetime | 10000 cycles |
| Connections - terminals | Single terminal (top or bottom), for 1 cable(s), 1…25 mm², rigid, copper; Single terminal (top or bottom), for 1 cable(s), 1…16 mm², flexible, copper; Single terminal (top or bottom), for 1 cable(s), 1…16 mm², flexible with ferrule, copper; Single terminal (top or bottom), for 1.0 cable(s), flexible, copper or aluminium, with ring terminal and accessory |
| Wire stripping length | 14 mm for top or bottom connection |
| [M] tightening torque | 2 Nm top or bottom |
| Earth fault protection | Separate block |
| Contact position indicator | |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Main features | |
| Product series | Acti9 |
| Product name | Acti9 iC60 |
| Product or component type | Miniature circuit breaker (MCB) |
| Device short name | iC60L |
| Device application | Motor |
| Pole description | 3P |
| Number of protected poles | 3 |
| [In] Rated current | 10 A |
| Type of network | AC |
| Trigger technology | Magnetic |
| Cam disc | MA |
| Product compatibility | Vigi iC60 single terminal add-on residual current device 25/40/63 A; Quick Vigi iC60 single terminal add-on residual current device 25/40 A |
| Application category | Category A corresponds to EN/IEC 60947-2 |
| Suitability for insulation | Yes, complies with EN/IEC 60947-2 |
| Standards | EN/IEC 60947-2 |
| Mounting | |
| Degree of protection (IP) | IP20 corresponds to IEC 60529; IP40 in modular enclosure (Class II insulation) corresponds to IEC 60529 |
| Pollution degree | 3 corresponds to EN/IEC 60947-2 |
| Over voltage category | IV |
| Drip-proof | 2 corresponds to IEC 60068-1 |
| Relative humidity | 95 % at 55 °C |
| Operating altitude | 0 - 2.000 m |
| Operating ambient temperature | -35…70 °C |
| Ambient temperature during storage | -40…85 °C |
| Packaging units | |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 7,500 cm |
| VPE 1 width | 5,500 cm |
| VPE 1 length | 9,500 cm |
| Packaging weight (Lbs) | 331,000 g |
| VPE 2 type | BB1 |
| VPE 2 quantity | 4 |
| VPE 2 height | 8,000 cm |
| VPE 2 width | 9,800 cm |
| VPE 2 length | 22,500 cm |
| VPE 2 weight | 1,381 kg |
| VPE 3 type | S03 |
| VPE 3 quantity | 44 |
| VPE 3 height | 30,000 cm |
| VPE 3 width | 30,000 cm |
| VPE 3 length | 40,000 cm |
| VPE 3 weight | 15,701 kg |
Questions & answers
What is the delivery time of Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA?
The article Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric A9F90310 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA always at the best possible price. We can give you a discount of 2% on Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA we can offer you a price of 155,14 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
|
Schneider Electric A9A26976 terminal cover 2-pole 36 mm for iC60 ilD Reflex iC60
The terminal cover A9A26976 from Schneider Electric is an insulation accessory for the Acti9 product family, specifically designed for 2-pole switches of the iC60, iID, and Reflex iC60 series. It ...Lieske Part No.: 929622 Mfg Part No: A9A26976 |
24,70 EUR 25,74 EUR
![]() ≈ £20.67 | ≈ $27.15
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26981 terminal screw cover 4-pole 72 mm for iC60 iID Refl. iC60
The product A9A26981 from Schneider Electric is a terminal screw cover for the Acti 9 product family. It serves as a screw protection and is specifically designed for switches of the iC60, iID, and ...Lieske Part No.: 936640 Mfg Part No: A9A26981 |
69,54 EUR 72,47 EUR
![]() ≈ £58.20 | ≈ $76.42
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27005 rotary operator iC60 handle black
The product A9A27005 from Schneider Electric is a rotary drive for the Acti 9 series, specifically designed for operating power switches and disconnectors of types iC60, iC60 + Vigi, iC60 iID, as well ...Lieske Part No.: 1768716 Mfg Part No: A9A27005 |
142,41 EUR 148,40 EUR
![]() ≈ £119.20 | ≈ $156.51
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27001 phase disconnector for iC60 ilD Reflex
The product A9A27001 from Schneider Electric is a phase separator from the Acti9 product series, specifically designed for use in control panels with devices from the product families iC60, iID and ...Lieske Part No.: 1768718 Mfg Part No: A9A27001 |
17,72 EUR 18,46 EUR
![]() ≈ £14.83 | ≈ $19.47
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26975 terminal cover 1-pole 18 mm for iC60 ilD Reflex iC60
Terminal cover Acti 9. 1-pole, 18mm. Prevents full contact with the connection terminals. For iC60, iID, Reflex iC60.Lieske Part No.: 1768852 Mfg Part No: A9A26975 |
20,14 EUR 20,99 EUR
![]() ≈ £16.86 | ≈ $22.13
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27006 rotary drive iC60 handle red
The article A9A27006 from Schneider Electric is a rotary drive for the iC60 series, specifically designed as control accessory for power switches and disconnectors. It serves for mechanical actuation ...Lieske Part No.: 1768855 Mfg Part No: A9A27006 |
133,47 EUR 139,10 EUR
![]() ≈ £111.71 | ≈ $146.68
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
Fitting accessory for Schneider Electric A9F90310 LS-switch iC60L 3-pole 10 A MA
|
Schneider Electric A9XPH357 phase busbar strip 3-pole 57 TE cuttable 100 A
The article A9XPH357 from Schneider Electric is a phase bar strip from the Acti9 series, designed for installation in electrical distribution boards. It serves as a comb busbar for the safe and ...Lieske Part No.: 174761 Mfg Part No: A9XPH357 |
93,29 EUR 97,22 EUR
![]() ≈ £78.08 | ≈ $102.53
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric A9XPH312 phase bar strip 3-pole 12 TE cuttable 100 A
The product A9XPH312 from Schneider Electric is a phase bar strip from the Acti9 series, designed for use in electrical distributions and enclosures. It serves as connection accessory for safe and ...Lieske Part No.: 307095 Mfg Part No: A9XPH312 |
20,33 EUR 21,19 EUR
![]() ≈ £17.02 | ≈ $22.34
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Schneider Electric A9A26970 locking element Acti9 for predecessor lock
Locking element Acti 9. Pack of 10. For padlocks.Lieske Part No.: 530810 Mfg Part No: A9A26970 |
52,53 EUR 54,75 EUR
![]() ≈ £43.97 | ≈ $57.73
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other.Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
![]() ≈ £13.12 | ≈ $17.22
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric 19091 multiple connection terminals (4 pcs)
The multi-connection terminals 19091 from Schneider Electric are specifically designed for use with circuit breakers from the ComPacT INS product family. These are terminals for secure and reliable ...Lieske Part No.: 592891 Mfg Part No: 19091 |
136,80 EUR 142,56 EUR
![]() ≈ £114.50 | ≈ $150.34
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
|
Schneider Electric A9A26946 load current release iMX+OF 220-415 VAC/110-130 VDC
The operating current release iMX+OF from Schneider Electric belongs to the Acti9 product family and serves as a remote tripping unit for circuit breakers or residual current circuit breakers. It ...Lieske Part No.: 611855 Mfg Part No: A9A26946 |
74,67 EUR 77,81 EUR
![]() ≈ £62.50 | ≈ $82.06
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26948 current release iMX+OF 12-24 V AC/DC
The operating current trip unit A9A26948 from Schneider Electric belongs to the Acti9 product family and is designed as iMX+OF. It is used for remote tripping of circuit breakers or residual current ...Lieske Part No.: 611859 Mfg Part No: A9A26948 |
74,67 EUR 77,81 EUR
![]() ≈ £62.50 | ≈ $82.06
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26960 undervoltage release iMN 220-240 VAC 50/60 Hz
Undervoltage release Acti 9 iMN. Operating voltage (Ue) 220-240V AC. Causes the associated circuit breaker to trip when the voltage drops. Prevents the circuit breaker from closing until the supply ...Lieske Part No.: 611860 Mfg Part No: A9A26960 |
94,91 EUR 98,90 EUR
![]() ≈ £79.44 | ≈ $104.31
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26969 undervoltage release iMNx 220-240 VAC 50/60 Hz emergency stop
The undervoltage release A9A26969 from the Acti9 product range by Schneider Electric is a modular safety device for emergency stop circuits. It functions as an undervoltage release and is mounted ...Lieske Part No.: 612677 Mfg Part No: A9A26969 |
161,41 EUR 168,20 EUR
![]() ≈ £135.10 | ≈ $177.39
Delivery time from supplier's stock (ca.) 5 workdaysinfo_outline
|
|
Schneider Electric A9C70114 remote actuator 3P/4P RCA for iC60
Remote operator Acti 9 RCA for circuit breaker Acti 9 iC60. 3-pole/4-pole, supply voltage (Ue) 230V AC, insulation voltage (Ui) 400V. Remote switching (opening and closing) of circuit breakers. Remote ...Lieske Part No.: 612696 Mfg Part No: A9C70114 |
312,55 EUR 325,71 EUR
![]() ≈ £261.60 | ≈ $343.49
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XAH357 phase busbar strip 3-pole + auxiliary switch 57TE adjustable 100A
The product A9XAH357 from Schneider Electric is a phase bar strip from the Acti9 series, designed for use in electrical distribution boards and enclosures. It serves as a connection and distribution ...Lieske Part No.: 612735 Mfg Part No: A9XAH357 |
80,56 EUR 83,95 EUR
![]() ≈ £67.43 | ≈ $88.54
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9C70124 remote actuator 3P/4P RCA with Ti24 for iC60
Fernantrieb Acti 9 RCA für Leitungsschutzschalter Acti 9 iC60. 3-polig/4-polig, Ti24-Schnittstelle, Versorgungsspannung (Ue) 230V AC, Isolationsspannung (Ui) 400V. Fernschalten (Öffnen und ...Lieske Part No.: 929459 Mfg Part No: A9C70124 |
331,55 EUR 345,51 EUR
![]() ≈ £277.51 | ≈ $364.37
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26976 terminal cover 2-pole 36 mm for iC60 ilD Reflex iC60
The terminal cover A9A26976 from Schneider Electric is an insulation accessory for the Acti9 product family, specifically designed for 2-pole switches of the iC60, iID, and Reflex iC60 series. It ...Lieske Part No.: 929622 Mfg Part No: A9A26976 |
24,70 EUR 25,74 EUR
![]() ≈ £20.67 | ≈ $27.15
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A27008 rotary drive iC60 without handle
The product A9A27008 from Schneider Electric is a rotary handle mechanism, specifically designed for the ISW 40–125, IC60, ISW-NA, and IID series. It is an operating accessory used as a rotary drive ...Lieske Part No.: 932377 Mfg Part No: A9A27008 |
124,45 EUR 129,69 EUR
![]() ≈ £104.16 | ≈ $136.77
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26981 terminal screw cover 4-pole 72 mm for iC60 iID Refl. iC60
The product A9A26981 from Schneider Electric is a terminal screw cover for the Acti 9 product family. It serves as a screw protection and is specifically designed for switches of the iC60, iID, and ...Lieske Part No.: 936640 Mfg Part No: A9A26981 |
69,54 EUR 72,47 EUR
![]() ≈ £58.20 | ≈ $76.42
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26917 telecommunication switch Acti9 iSD 1We2mA up to 100mA 24VAC up to 250VAC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current is between 2mA and 100mA ...Lieske Part No.: 1104000 Mfg Part No: A9A26917 |
44,32 EUR 46,18 EUR
![]() ≈ £37.10 | ≈ $48.71
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26904 auxiliary contact Acti9 iOF 100 mA at 6 A 24 VAC at 415 VAC 24–130 VDC
The auxiliary switch A9A26904 from the Acti9 product range by Schneider Electric is an auxiliary switch OF (iOF) for visual or electrical indication of the operating position of a circuit breaker. It ...Lieske Part No.: 1104013 Mfg Part No: A9A26904 |
27,69 EUR 28,86 EUR
![]() ≈ £23.18 | ≈ $30.43
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26914 auxiliary contact Acti9 iOF 2 mA to 100 mA 24 VAC to 250 VAC 24 VDC
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current is between 2mA and 100mA at a frequency of 50Hz to ...Lieske Part No.: 1104015 Mfg Part No: A9A26914 |
29,21 EUR 30,44 EUR
![]() ≈ £24.45 | ≈ $32.10
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26909 auxiliary contact remote switch Acti9 iOF/SD+OF 100 mA to 6 A
The iOF/SD+OF auxiliary contact is a 2-in-1 product with a mechanical selector switch. It can be either: SD+OF or OF+OF. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at 240VAC and ...Lieske Part No.: 1104019 Mfg Part No: A9A26909 |
55,20 EUR 57,52 EUR
![]() ≈ £46.20 | ≈ $60.66
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
|
Schneider Electric A9A26907 auxiliary contact remote switch Acti9 iSD 1We 100 mA to 6 A
This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current from 100mA to 6A at a ...Lieske Part No.: 1104020 Mfg Part No: A9A26907 |
42,23 EUR 44,01 EUR
![]() ≈ £35.35 | ≈ $46.41
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26919 auxiliary contact remote switch Acti9 iSD+OF 2 mA to 100 mA
The iOF/SD+OF auxiliary contact is a 2-in-1 product with a mechanical selector switch. It can be either: SD+OF or OF+OF. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at ...Lieske Part No.: 1104021 Mfg Part No: A9A26919 |
58,05 EUR 60,49 EUR
![]() ≈ £48.59 | ≈ $63.80
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26500 overvoltage release iMSU 230 V AC
The overvoltage release A9A26500 from the Acti9 product range by Schneider Electric serves as a protection function in electrical installations. It is specifically designed to trigger a circuit ...Lieske Part No.: 1326265 Mfg Part No: A9A26500 |
127,77 EUR 133,16 EUR
![]() ≈ £106.94 | ≈ $140.42
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9A26478 load current release iMX 12-24 V AC/DC
The iMX operating current trip unit A9A26478 from the Acti9 product family by Schneider Electric is an electrical control device for remote tripping of circuit breakers or residual current circuit ...Lieske Part No.: 1329649 Mfg Part No: A9A26478 |
53,48 EUR 55,74 EUR
![]() ≈ £44.76 | ≈ $58.77
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XPH324 phase bar strip 3-pole 24 TE adjustable 100 A
Phase busbar Steg Acti 9. 3-pole, can be cut to length, 24TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ...Lieske Part No.: 1331937 Mfg Part No: A9XPH324 |
35,05 EUR 36,53 EUR
![]() ≈ £29.34 | ≈ $38.52
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9XPH306 phase bar strip 3-pole 6TE adjustable 100A
Phase busbar Steg Acti 9. 3-pole, can be cut to length, 6TE, nominal current 100A, nominal voltage 415V AC, insulation voltage (Ui) 500V. Color RAL 7016. The phase busbar Steg meets the following ...Lieske Part No.: 1340605 Mfg Part No: A9XPH306 |
11,59 EUR 12,08 EUR
![]() ≈ £9.70 | ≈ $12.74
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9MEM1573 compact energy meter PowerTag Flex
The PowerTag Energy F63 3P is a wirelessly communicating energy meter. With its flexible design, it is suitable for 3P measuring points with a nominal power of 63A or less. The energy meter must be ...Lieske Part No.: 1714257 Mfg Part No: A9MEM1573 |
-16% 162,92 EUR 192,99 EUR
![]() ≈ £136.36 | ≈ $179.05
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9V61340 Fi-Block Vigi iC60L 3-pole 40A 30mA Type A fuse monitoring
FI-Block Acti 9 Vigi iC60L. 3-pole, nominal current 40A, nominal residual current 30mA, type A, SI, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 500V AC. Can be mounted on the ...Lieske Part No.: 1767303 Mfg Part No: A9V61340 |
236,55 EUR 246,51 EUR
![]() ≈ £197.99 | ≈ $259.97
Made to order · Delivery time approx. 14 workdaysinfo_outline
|
|
Schneider Electric A9V61363 Fi-Block Vigi iC60L 3-pole 63 A 30 mA Type A fuse monitoring
FI-Block Acti 9 Vigi iC60L. 3-pole, nominal current 63A, nominal residual current 30mA, type A, SI, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 500V AC. Can be mounted on the ...Lieske Part No.: 1767316 Mfg Part No: A9V61363 |
432,25 EUR 450,45 EUR
![]() ≈ £361.79 | ≈ $475.04
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
|
Schneider Electric A9V29363 Fi-Block Vigi iC60L 3-pole 63 A 1000 mA Type A selective
FI block Acti 9 Vigi iC60L. 3-pole, nominal current 63A, nominal residual current 1000mA, type A, selective, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 500V AC. Can be mounted on the ...Lieske Part No.: 1767374 Mfg Part No: A9V29363 |
393,30 EUR 409,86 EUR
![]() ≈ £329.19 | ≈ $432.24
Made to order · Delivery time approx. 14 workdaysinfo_outline
|
|
Schneider Electric A9V54363 Fi-Block Vigi iC60L 3-pole 63 A 300 mA Type A
FI-Block Acti 9 Vigi iC60L. 3-pole, nominal current 63A, nominal residual current 300mA, type A, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 500V AC. Can be mounted on the right-hand ...Lieske Part No.: 1767380 Mfg Part No: A9V54363 |
178,13 EUR 185,63 EUR
![]() ≈ £149.09 | ≈ $195.76
Made to order · Delivery time approx. 14 workdaysinfo_outline
|































