Schneider Electric A9A26909 auxiliary contact remote switch Acti9 iOF/SD+OF 100 mA to 6 A content_copy

The iOF/SD+OF auxiliary contact is a 2-in-1 product with a mechanical selector switch. It can be either: SD+OF or OF+OF. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at 240VAC and from 100mA to 3A at a frequency of 50Hz to 60Hz at 415VAC. Operating current at 100 mA at 24VDC to 130VDC. Operating current of 6A is at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 2 position switches with contacts of type 2 changeover contact. Intended for installations in small commercial establishments or buildings. This electrical accessory is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double connection residual current circuit breaker (RCCB). The OC and fault contact is only installed for Acti9 devices such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA which include 2 changeover contacts. If there is no comb bar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is used either for the device short name or the compatibility code. The mechanical indicator is provided on the product for signaling (local). Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². Screw terminal connection at the bottom enables a cable cross-section of 0.5 mm² to 2.5 mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross-section 2 cables enables a cable cross-section of 2.5mm². It has a screw terminal connection at the top and bottom. The connection is flexible with ferrule copper cables (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse voltage (Uimp) is 4kV. The width in 9 mm increments is 1. The dimensions are (W) 9 mm x (H) 90 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The connection tightening torque is 1N.m (below) for the screwdriver type PZ1. According to IEC 60529, the IP protection degree is IP20. The operating temperature range is -35°C to +70°C. The storage temperature range is -40°C to +85°C. This product complies with EN/IEC 60947-5-1 and GB/T 14048.5. This product is certified with CE and UKCA marks.

Complementary
Range compatibility	Acti9 iC60; Acti9 iID; Acti9 ARA; Acti9 RCA; Acti9 iDPN Vigi; Acti9 iC40; Acti9 iSW-NA; Acti9 iCVm40; Acti9 iCVr40; Acti9 iDDm40
[Ui] rated insulation voltage	500 V
[Uimp] rated impulse withstand voltage	4 kV
Local signalling	Mechanical indicator
Mounting mode	Clip-on
Mounting location	Left side of circuit-breaker
Mounting support	DIN rail
Height	90 mm
Width	9 mm
Depth	73 mm
Net weight	43 g
Colour	White
Connections - terminals	Screw clamp terminal (top and bottom): 1 cable(s) 0.5…2.5 mm² - flexible; Screw clamp terminal (top and bottom): 1 cable(s) 1…4 mm² - rigid; Screw clamp terminal (top and bottom): 2 cable(s) 2.5 mm² - rigid; Screw clamp terminal (top and bottom): 2 cable(s) 1.5 mm² - flexible with ferrule
Wire stripping length	10 mm
Tightening torque	1 N.m top and bottom
Comb busbar and distribution block compatibility
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Pollution degree	3
Tropicalisation	2
Relative humidity	95 % at 55 °C
Ambient air temperature for operation	-35…70 °C
Ambient air temperature for storage	-40…85 °C
Logistical informations
Country of origin	IN
Main
range of product	Acti9
Product or component type	Double OC or fault contact
Device short name	iOF/SD+OF
Signal contacts composition	2 C/O
[In] rated current	0.1…6 A at 24...240 V, AC 50/60 Hz; 0.1…3 A at 415 V, AC 50/60 Hz; 0.1…6 A at 24 V, DC; 0.1…2 A at 48 V, DC; 0.1…1.5 A at 60 V, DC; 0.1…1 A at 130 V, DC
9 mm pitches	1
Standards	EN/IEC 60947-5-1; GB/T 14048.5
Product certifications	CE; UKCA
Quality labels	EAC; CCC; CMIM
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	2.300 cm
Package 1 Width	8.000 cm
Package 1 Length	9.400 cm
Package 1 Weight	50.000 g
Unit Type of Package 2	BB1
Number of Units in Package 2	12
Package 2 Height	8.000 cm
Package 2 Width	10.000 cm
Package 2 Length	27.000 cm
Package 2 Weight	682.000 g
Unit Type of Package 3	S03
Number of Units in Package 3	120
Package 3 Height	30.000 cm
Package 3 Width	30.000 cm
Package 3 Length	40.000 cm
Package 3 Weight	7.507 kg

---