Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz
|
489,25 EUR 509,85 EUR |
|||||||||||
|
( 582,21 EUR incl. VAT ) ≈ £408.03 | ≈ $546.49 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 612695 | ||||||||||
| Mfg Part No: | A9C20884 | ||||||||||
| UPC/EAN: | 3606480375200 | ||||||||||
| Weight: | 0.621 kg | ||||||||||
| Type: | A9C20884 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Heating contactor from Schneider ElectricFurther products in category Heating contactor
All products of Schneider Electric
Product information for Schneider Electric A9C20884:
Installation contactor Acti 9 iCT. Nominal current 100A, 4S, control voltage 220/240V, 50Hz, insulation voltage (Ui) 500V AC. Switching of circuits up to 100A. Terminals IP 20. Low-noise switching. Mechanical switch position indicator. Installation contactors with preselection have a front-side operating mode selector switch with four switch positions. Compatible with the entire Acti 9 product range. The iCT installation contactor meets the following standards - EN 61095 and IEC 1095. This series is also VDE certified!
| Complementary | |
| Network frequency | 50 Hz |
| [Ue] rated operational voltage | 400 V AC 50 Hz |
| Maximum power | AC-7A: 4.2 W at 400 V AC 50 Hz |
| [Ui] rated insulation voltage | 500 V AC 50 Hz |
| [Uimp] rated impulse withstand voltage | 4 kV |
| Control signal type | Maintained |
| Switching frequency | 100 switching operations/day |
| Local signalling | Action indicator |
| Hold-in power consumption in VA | 13 VA |
| Inrush power in VA | 106 VA |
| Mounting mode | Clip-on |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 12 |
| Height | 85 mm |
| Width | 108 mm |
| Depth | 60 mm |
| Colour | White |
| Electrical durability | 30000 cycles EN 61095 400 V 16 A AC 50 Hz AC-7A; 30000 cycles UTE C 61-481 400 V 6 A AC 50 Hz AC-7A; 30000 cycles IEC 61095 400 V AC 50 Hz AC-7A |
| Connections - terminals | Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid; Control circuit: tunnel type terminals1 cable(s) 1.5…2.5 mm² rigid; Control circuit: tunnel type terminals2 cable(s) 1.5…2.5 mm² flexible; Power circuit: tunnel type terminals1 cable(s) 6…35 mm² solid or flexible |
| Tightening torque | Power circuit: 3.5 N.m; Control circuit: 0.8 N.m A1 / A2 |
| Product compatibility | IACTp; IACTs; IATEt; IACTc |
| Compatibility code | ICT |
| Market segment | Small commercial; Residential |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Standards | EN 61095; IEC 61095; UTE C 61-481 |
| Noise level | 30 dB |
| IP degree of protection | IP20 conforming to IEC 60529; IP40 (modular enclosure) conforming to IEC 60529 |
| Pollution degree | 2 |
| Tropicalisation | 2 conforming to EN 60947-4-1 |
| Relative humidity | 95 % at 55 °C |
| Operating altitude | 2000 m |
| Ambient air temperature for operation | -5…60 °C |
| Ambient air temperature for storage | -40…70 °C |
| Logistical informations | |
| Country of origin | FR |
| Main | |
| range of product | Acti9 |
| Product name | Acti9 iCT |
| Product or component type | Contactor |
| Device short name | iCT |
| Device application | Heating-low inductive load |
| Poles | 4P |
| [Ie] rated operational current | 100 A AC-7A |
| Pole contact composition | 4 NO |
| Network type | AC |
| Utilisation category | AC-1 conforming to EN 60947-4-1; AC-7A conforming to EN 61095; AC-7A conforming to IEC 61095; AC-7A conforming to UTE C 61-481; AC-1 conforming to IEC 60947-4-1 |
| Control type | Remote control |
| [Uc] control circuit voltage | 220...240 V AC 50 Hz |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.800 cm |
| Package 1 Width | 8.800 cm |
| Package 1 Length | 10.900 cm |
| Package 1 Weight | 621.000 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 2 |
| Package 2 Height | 8.300 cm |
| Package 2 Width | 9.800 cm |
| Package 2 Length | 23.200 cm |
| Package 2 Weight | 1.304 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 16 |
| Package 3 Height | 30.000 cm |
| Package 3 Width | 30.000 cm |
| Package 3 Length | 40.000 cm |
| Package 3 Weight | 10.919 kg |
Questions & answers
What is the delivery time of Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz?
The article Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric A9C20884 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz always at the best possible price. We can give you a discount of 2% on Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz we can offer you a price of 456,23 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other. Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
 ≈ £13.07 | ≈ $17.50
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9N18436 LS-switch C120H 4-pole B 100A
Circuit breaker Acti 9 iDPN, 6kA (IEC/EN 60898-1). 1-pole+N, nominal current 16A, D characteristic, 1TE, operating voltage (Ue) 400V AC, insulation voltage (Ui) 440V AC. Protection against short ... Lieske Part No.: 557768 Mfg Part No: A9N18436 |
614,65 EUR 640,53 EUR
≈ £512.62 | ≈ $686.56
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9N18354 LS-switch C120N 4-pole B 100A
Circuit breaker Acti 9 K60N, 6kA (IEC/EN 60898-1). 3-pole, nominal current 6A, B characteristic, operating voltage (Ue) 400V AC, insulation voltage (Ui) 500V AC. Dual function terminal on the bottom ... Lieske Part No.: 559818 Mfg Part No: A9N18354 |
517,75 EUR 539,55 EUR
≈ £431.80 | ≈ $578.33
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9N18355 LS-switch C120N 4-pole B 125A
Circuit breaker Acti 9 K60N, 6kA (IEC/EN 60898-1). 3-pole, nominal current 10A, B characteristic, operating voltage (Ue) 400V AC, insulation voltage (Ui) 500V AC. Dual function terminal on the bottom ... Lieske Part No.: 559821 Mfg Part No: A9N18355 |
637,45 EUR 664,29 EUR
≈ £531.63 | ≈ $712.03
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for Schneider Electric A9C20884 installation contactor iCT 63 A 4NC 220/240 V 50 Hz
 |
Schneider Electric A9C15914 auxiliary switch iACTS for iCT 1NO+1NC
Auxiliary switch Acti 9 iACTs for contactor iCT. 1 normally open contact + 1 normally closed contact, operating voltage (Ue) 24-240V AC / 24-130V DC. Display of the OPEN and CLOSED switching positions ... Lieske Part No.: 467430 Mfg Part No: A9C15914 |
35,67 EUR 37,17 EUR
≈ £29.75 | ≈ $39.84
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C18308 impulse control device iACTc 230-240 VAC
Pulse control Acti 9 iACTc. Operating voltage (Ue) 230-240V AC. Control of the installation contactor using two types of command. Pulse command for local control. Permanent command for central control. Lieske Part No.: 467432 Mfg Part No: A9C18308 |
116,85 EUR 121,77 EUR
≈ £97.45 | ≈ $130.52
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric A9A27062 filler and spacing piece 9 mm white
Filler and spacer Acti 9. Width 0.5TE. Filling of unused TE. Separating devices with high heat generation from each other. Lieske Part No.: 530899 Mfg Part No: A9A27062 |
15,67 EUR 16,34 EUR
≈ £13.07 | ≈ $17.50
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C15915 auxiliary switch iACTs for iCT 1W
Auxiliary switch Acti 9 iACTs for contactor iCT. 1 changeover contact, operating voltage (Ue) 24-240V AC / 24-130V DC. Display of the switch positions OPEN and CLOSED of the contacts of the load ... Lieske Part No.: 534352 Mfg Part No: A9C15915 |
33,68 EUR 35,10 EUR
≈ £28.09 | ≈ $37.62
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C15419 time delay iATEt 24-230 V AC/24-110 V DC
Time relay Acti 9 time delay iATEt. Operating voltage (Ue) 24-230V AC / 24-110V DC. Time-delayed control of the contactors iCT and iTL. Depending on the wiring, up to four functions can be implemented. Lieske Part No.: 612679 Mfg Part No: A9C15419 |
135,85 EUR 141,57 EUR
≈ £113.30 | ≈ $151.74
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C20882 installation contactor iCT 63 A 4NC 220/240 V 50 Hz
Installation contactor Acti 9 iCT. Nominal current 100A, 2S, control voltage 220/240V, 50Hz, insulation voltage (Ui) 500V AC. Switching of circuits up to 100A. Terminals IP 20. Low-noise switching. Lieske Part No.: 612694 Mfg Part No: A9C20882 |
401,85 EUR 418,77 EUR
≈ £335.14 | ≈ $448.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C15916 auxiliary switch iACTs for iCT 2S
Hilfsschalter Acti 9 iACTs für Schütz iCT. 1 Schließer, Betriebsspannung (Ue) 24-240V AC / 24-130V DC. Anzeige der Schaltstellungen OFFEN und GESCHLOSSEN der Kontakte des Lastkreises. Die Montage ... Lieske Part No.: 932372 Mfg Part No: A9C15916 |
36,77 EUR 38,31 EUR
≈ £30.67 | ≈ $41.07
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C15920 surge limiter iACTp 220-240 VAC
Interference voltage limiter Acti 9 iACTp. Operating voltage (Ue) 220-240V AC. Limits overvoltages in the control circuit. Mounted on the left side of the iCT with yellow clips or with wiring. Lieske Part No.: 1565322 Mfg Part No: A9C15920 |
89,02 EUR 92,76 EUR
≈ £74.24 | ≈ $99.44
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric A9C15924 auxiliary module iACT24 for remote switching iCT with Ti24-PLC 24 VDC
Acti 9 communication system, connectable devices without Ti24 interface. Auxiliary module iACT24 for remote switch iCT with Ti24 interface, 24V DC. Type iACT24. Energy meter with pulse output, e.g. Lieske Part No.: 1768809 Mfg Part No: A9C15924 |
96,42 EUR 100,49 EUR
≈ £80.41 | ≈ $107.70
Made to order · Delivery time approx. 20 workdaysinfo_outline
|