Schneider Electric A9A26904 Schneider auxiliary contact Acti9 iOF 100mA to 6A 24VAC to 415VAC 24-130VDC

This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the OPEN or CLOSED position of the circuit breaker. Operating current from 100mA to 6A at a frequency of 50Hz to 60Hz at 240VAC and from 100mA to 3A at a frequency of 50Hz to 60Hz at 415VAC. Operating current at 100mA at 24VDC to 130VDC. Operating current of 6A at 24VDC, 2A at 48VDC, 1.5A at 60VDC, 1A at 110VDC and 130VDC. It has 1 position switch with 1 changeover contact type contacts. Intended for installations in small commercial establishments or buildings. This electrical accessory is compatible with Acti9 products such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iCV40 Vigi ARC, iC40 XA, iCV40 XA, iC60 RCBO. This OC contact is compatible with Acti9 products such as Acti9 iDT40, iDT40 XA and iDD40. The iOF is used for either the device short name or the compatibility code. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². Screw terminal connection on the bottom allows a cable cross section of 0.5mm² to 2.5mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section 2 cables allows a cable cross section of 2.5mm². It has a screw terminal connection on the bottom. The connection is flexible with ferrule copper cables (2 cables). The cable cross section is 1.5mm². The rated insulation voltage (Ui) is up to 500V. The rated impulse voltage (Uimp) is 4kV. The width in 9mm pitch is 1. The dimensions are (W) 9mm x (H) 86mm x (D) 73mm. The product color is white (RAL 9003). The pollution degree is 3. The degree of tropicalization is treatment 2. The tightening torque of the connection is 1N.m (bottom) for PZ1 screwdriver type. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature is between -35°C and +70°C. The storage temperature is between -40°C and +85°C. This product complies with EN/IEC 60947-5-1 and GB/T 14048.5. This product is certified with CE and UKCA marking.
Type: A9A26904