Schneider Electric 56193 earth fault relay RH99M automatic reset 0
|
850,25 EUR 886,05 EUR |
|||||||||||
|
( 1.011,80 EUR incl. VAT ) ≈ £709.96 | ≈ $958.23 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 470419 | ||||||||||
| Mfg Part No: | 56193 | ||||||||||
| UPC/EAN: | 3303430561934 | ||||||||||
| Weight: | 0.3 kg | ||||||||||
| Type: | 56193 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Switching units / measuring, control relay from Schneider ElectricFurther products in category Switching units / measuring, control relay
All products of Schneider Electric
Product information for Schneider Electric 56193:
VigiPacT RH99M is a residual current monitoring relay for DIN rail mounting. It monitors the drop in electrical insulation due to aging of cables or extensions in the installation. It measures the leakage current in an electrical installation through its associated toroidal transformer. When the residual current operating threshold is exceeded, a control signal is issued by the relay. The operating supply voltage is 220/240VAC 50/60Hz. The current sensitivity is selectable with 9 thresholds from 30 mA to 30 A. The time delay is selectable with 9 settings from instantaneous to 4.5s. There is an automatic reset after a fault has been cleared. The monitored voltage of the distribution network is up to 1000 VAC 50/60/400 Hz. It is installed on a DIN rail in a control cabinet and has an IP40 protection rating. It must be connected to a compatible Schneider Electric Type A toroidal or rectangular sensor.
| Complementary | |
| Test function | Local; Remote test |
| Monitoring | Electronics (continuous) ; Power supply (continuous) ; Relay/sensor link (continuous) |
| Type of measurement | Earth fault current internal measurement, range: 80...100 % |
| Tamperproof of settings | Protected by sealable cover |
| Wire stripping length | Auxiliary power supply: 7 mm for top connection; Fault: 8 mm for bottom connection; Relay test and fault reset: 5 mm for bottom connection; Sensor: 5 mm for top connection; Voltage presence: 8 mm for bottom connection |
| Tightening torque | Auxiliary power supply: 0.6 N.m top; Fault: 0.6 N.m bottom; Relay test and fault reset: 0.25 N.m bottom; Sensor: 0.25 N.m top; Voltage presence: 0.6 N.m bottom |
| 9 mm pitches | 6 |
| Standards | EN/IEC 60947-2 Annex M; EN/IEC 60755; UL 1053; CAN/CSA C22.2 No. 144 |
| Width | 54 mm |
| Height | 81 mm |
| Depth | 74 mm |
| Net weight | 0.3 kg |
| IP degree of protection | IP40 on front face: conforming to EN/IEC 60529; IP30 on side parts: conforming to EN/IEC 60529; IP20 on connection terminals: conforming to EN/IEC 60529 |
| IK degree of protection | IK07 conforming to EN 50102 |
| Mechanical robustness | Fire resistance conforming to IEC 60695-2-1; IK protection 2 joules: IK07 conforming to EN 50102; Vibrations 13.2...100 Hz: 0.7 g; Vibrations 2...13.2 Hz: +/- 1 mm |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| Overvoltage category | IV |
| Electrical shock protection class | Class II |
| Electromagnetic compatibility | Conducted and radiated emissions: , B, conforming to CISPR 11; Conducted radio-frequency immunity test: , 3, conforming to IEC 61000-4-6; Electrostatic discharge immunity test: , 4, conforming to IEC 61000-4-2; High-energy conducted susceptibility: , 4, conforming to IEC 61000-4-5; Low-energy conducted susceptibility: , 4, conforming to IEC 61000-4-4; Radiated susceptibility: , 3, conforming to IEC 61000-4-3 |
| Relative humidity | 95 % at 55 °C |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Ambient air temperature for operation | -35…70 °C |
| Ambient air temperature for storage | -55…85 °C |
| Logistical informations | |
| Country of origin | FR |
| Main | |
| Range | VigiPacT |
| Device short name | RH99M |
| Product or component type | Monitoring relay |
| Relay application | Monitoring relay |
| Mounting support | DIN rail |
| Type of setting | Selector |
| Residual earth-leakage sensitity adjustment type | Adjustable 9 settings |
| Earth-leakage sensitivity | 0.03…30 A |
| Earth-leakage time delay | Instantaneous for 0.03 A; Adjustable 9 settings 0…4.5 s for 0.03…30 A |
| Threshold setting | 0.03...30 A alarm |
| Current sensors compatibility | VigiPacT TOA earth leakage current sensor; VigiPacT A earth leakage current sensor; VigiPacT L earth leakage current sensor |
| [Ithe] conventional enclosed thermal current | 8 A |
| Minimum load | 10 mA at 12 V |
| [Us] rated supply voltage | 220...240 V AC 50/60 Hz 55...110 % |
| Power consumption in VA | 4 VA |
| Monitored distribution system | 1000 V - AC at 50/60 Hz (maximum) ; 1000 V - AC at 400 Hz (maximum) |
| Earthing system | TT; TN-S |
| [Uimp] rated impulse withstand voltage | 8 kV |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.800 cm |
| Package 1 Width | 8.600 cm |
| Package 1 Length | 9.200 cm |
| Package 1 Weight | 263.400 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 36 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 9.882 kg |
Questions & answers
What is the delivery time of Schneider Electric 56193 earth fault relay RH99M automatic reset 0?
The article Schneider Electric 56193 earth fault relay RH99M automatic reset 0 is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric 56193 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric 56193 earth fault relay RH99M automatic reset 0 always at the best possible price. We can give you a discount of 2% on Schneider Electric 56193 earth fault relay RH99M automatic reset 0 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 3 pieces of Schneider Electric 56193 earth fault relay RH99M automatic reset 0 we can offer you a price of 824,74 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Schneider Electric 50439 toroidal transformer IA80
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598753 Mfg Part No: 50439 |
584,25 EUR 605,28 EUR
 ≈ £487.85 | ≈ $658.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 50440 ring core transformer MA120
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598760 Mfg Part No: 50440 |
836,00 EUR 866,10 EUR
≈ £698.06 | ≈ $942.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 50438 converter
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598764 Mfg Part No: 50438 |
491,15 EUR 508,83 EUR
≈ £410.11 | ≈ $553.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 50437 toroidal transformer TA30
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598768 Mfg Part No: 50437 |
349,60 EUR 362,19 EUR
≈ £291.92 | ≈ $394.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 50420 TOA80 residual current transformer divisible
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 1865888 Mfg Part No: 50420 |
1.867,70 EUR 1.946,34 EUR
≈ £1,559.53 | ≈ $2,104.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 50421 TOA120 residual current transformer split
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 1865889 Mfg Part No: 50421 |
2.135,60 EUR 2.225,52 EUR
≈ £1,783.23 | ≈ $2,406.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
Fitting accessory for Schneider Electric 56193 earth fault relay RH99M automatic reset 0
|
|
Schneider Electric 50439 toroidal transformer IA80
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598753 Mfg Part No: 50439 |
584,25 EUR 605,28 EUR
≈ £487.85 | ≈ $658.45
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric 50440 ring core transformer MA120
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598760 Mfg Part No: 50440 |
836,00 EUR 866,10 EUR
≈ £698.06 | ≈ $942.17
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric 50438 converter
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598764 Mfg Part No: 50438 |
491,15 EUR 508,83 EUR
≈ £410.11 | ≈ $553.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric 50437 toroidal transformer TA30
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 598768 Mfg Part No: 50437 |
349,60 EUR 362,19 EUR
≈ £291.92 | ≈ $394.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric 50420 TOA80 residual current transformer divisible
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 1865888 Mfg Part No: 50420 |
1.867,70 EUR 1.946,34 EUR
≈ £1,559.53 | ≈ $2,104.90
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Schneider Electric 50421 TOA120 residual current transformer split
This toroid is designed for Vigilohm insulation fault locators and VigiPacT type A residual current protection and monitoring relays. It allows monitoring the fed component of Vigilohm Insulation ... Lieske Part No.: 1865889 Mfg Part No: 50421 |
2.135,60 EUR 2.225,52 EUR
≈ £1,783.23 | ≈ $2,406.82
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric C25N3TM250 compact power circuit breaker ComPacT NSX250N
This ComPacT NSX250N is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and special applications. The breaking ... Lieske Part No.: 1894643 Mfg Part No: C25N3TM250 |
1.465,28 EUR 1.467,27 EUR
≈ £1,223.51 | ≈ $1,651.37
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric C40F32D400 compact power circuit breaker ComPacT NSX400F
This ComPacT NSX400F is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and special applications. The breaking ... Lieske Part No.: 1894783 Mfg Part No: C40F32D400 |
2.172,49 EUR
≈ £1,814.03 | ≈ $2,448.40
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric C40N32D400 compact power circuit breaker ComPacT NSX400N
This ComPacT NSX400N is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and special applications. The breaking ... Lieske Part No.: 1894814 Mfg Part No: C40N32D400 |
2.253,54 EUR
≈ £1,881.71 | ≈ $2,539.74
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric C63F32D630 compact power circuit breaker ComPacT NSX630F
This ComPacT NSX630F is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and special applications. The breaking ... Lieske Part No.: 1894884 Mfg Part No: C63F32D630 |
2.977,71 EUR
≈ £2,486.39 | ≈ $3,355.88
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric C63N32D630 compact power circuit breaker ComPacT NSX630N
This ComPacT NSX630N is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and special applications. The breaking ... Lieske Part No.: 1894907 Mfg Part No: C63N32D630 |
3.110,64 EUR
≈ £2,597.38 | ≈ $3,505.69
Made to order · Delivery time approx. 20 workdaysinfo_outline
|