Schneider Electric 18749 power switch NG125L 1-pole B 80A
|
225,15 EUR 234,63 EUR |
|||||||||||
|
( 267,93 EUR incl. VAT ) ≈ £188.00 | ≈ $252.39 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 101681 | ||||||||||
| Mfg Part No: | 18749 | ||||||||||
| UPC/EAN: | 3303430187493 | ||||||||||
| Weight: | 0.257 kg | ||||||||||
| Type: | 18749 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Breakers and disconnectors from Schneider ElectricFurther products in category Breakers and disconnectors
All products of Schneider Electric
Product information for Schneider Electric 18749:
Acti 9 NG125H circuit breaker, 36kA (IEC/EN 60947-2). 4-pole, nominal current 80A, C characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 690V AC. Protection of the circuit against short-circuit currents. Protection of the circuit against overload currents. Tripping is indicated by the middle position of the switch knob and by a red, mechanical display on the front of the device. Test button for checking the tripping mechanism. Power supply from above or below. Snap action for low-wear switching of the contacts. Technology of the tripping unit - thermomagnetic. Additional auxiliary modules that can be added in series (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. The NG125H circuit breaker meets the following standards - IEC/EN 60947-2. Furthermore, this series is VDE certified.
| Additional features | |
| Network frequency | 50/60 Hz |
| [Ue] Operational rated voltage | 380 - 415 V AC 50/60 Hz; 125 V DC; |
| Magnetic trip threshold | 4 x In |
| [Ics] Rated operational breaking capacity | 37.5 kA 75 % corresponds to EN/IEC 60947-2 - 220 - 240 V AC 50/60 Hz; 75 kA 75 % corresponds to EN/IEC 60947-2 - 110 - 130 V AC 50/60 Hz; 9.37 kA 75 % corresponds to EN/IEC 60947-2 - 380 - 415 V AC 50/60 Hz; 50 kA 100 % corresponds to EN/IEC 60947-2 - 60 V DC; 50 kA 100 % corresponds to EN/IEC 60947-2 - 125 V DC |
| [Ui] Rated insulation voltage | 690 V AC 50/60 Hz complies with EN/IEC 60947-2 |
| [Uimp] Rated impulse voltage withstand | 8 kV corresponds to EN/IEC 60947-2 |
| Control type | Toggle switch; Manual trip test |
| Local signalling | ON/OFF indicator; trip indicator |
| Mounting mode | Plug-in |
| Mounting position | Vertical |
| Mounting bracket | 35 mm symmetrical DIN rail |
| 9-mm pitch | 3 |
| Height | 103 mm |
| Depth | 81 mm |
| Width | 27 mm |
| Product weight | 0,24 kg |
| Mechanical life | 20000 cycles |
| Electrical lifetime | 5000 cycles |
| Provisions for padlocks | Lockable |
| Description of locking options | Integrated locking |
| Connections - terminals | Tunnel terminals 16…70 mm² rigid; Tunnel terminals 10…50 mm² flexible |
| Wire stripping length | 20 mm |
| [M] tightening torque | 6 Nm |
| Earth fault protection | None |
| Contact position indicator | |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Main features | |
| Product series | Acti9 |
| Product name | Acti9 NG125 |
| Product or component type | Miniature circuit breaker (MCB) |
| Device short name | NG125L |
| Device application | Distribution |
| Pole description | 1P |
| Number of protected poles | 1 |
| [In] Rated current | 80 A at 40 °C |
| Type of network | AC; DC |
| Trigger technology | Thermal-magnetic |
| Cam disc | B |
| Breaking capacity | 50 kA Icu at 220 - 240 V AC 50/60 Hz complies with EN/IEC 60947-2; 100 kA Icu at 110 - 130 V AC 50/60 Hz complies with EN/IEC 60947-2; 50 kA Icu at 12 V DC complies with EN/IEC 60947-2; 50 kA Icu at 125 V DC complies with EN/IEC 60947-2; 36 kA Icu at |
| Application category | Category A corresponds to IEC 60947-2 |
| Suitability for insulation | Yes, complies with IEC 60947-2 |
| Standards | EN/IEC 60947-2 |
| Mounting | |
| Degree of protection (IP) | IP20 complies with IEC 60529 |
| Degree of protection (IK) | IK05 corresponds to EN/IEC 62262 |
| Pollution degree | 3 corresponds to IEC 60947-2 |
| Over voltage category | IV |
| Drip-proof | 2 corresponds to IEC 60068-1 |
| Relative humidity | 95 % at 55 °C |
| Operating altitude | 2.000 m |
| Operating ambient temperature | -30…70 °C |
| Ambient temperature during storage | -40…70 °C |
| Packaging units | |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 3 cm |
| VPE 1 width | 8 cm |
| VPE 1 length | 10,8 cm |
| Packaging weight (Lbs) | 257 g |
| VPE 2 type | BB1 |
| VPE 2 quantity | 12 |
| VPE 2 height | 9 cm |
| VPE 2 width | 11,7 cm |
| VPE 2 length | 35,7 cm |
| VPE 2 weight | 3,172 kg |
| VPE 3 type | S03 |
| VPE 3 quantity | 72 |
| VPE 3 height | 30 cm |
| VPE 3 width | 30 cm |
| VPE 3 length | 40 cm |
| VPE 3 weight | 19,519 kg |
Questions & answers
What is the delivery time of Schneider Electric 18749 power switch NG125L 1-pole B 80A?
The article Schneider Electric 18749 power switch NG125L 1-pole B 80A is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric 18749 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric 18749 power switch NG125L 1-pole B 80A always at the best possible price. We can give you a discount of 2% on Schneider Electric 18749 power switch NG125L 1-pole B 80A if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric 18749 power switch NG125L 1-pole B 80A we can offer you a price of 211,64 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Schneider Electric 18749 power switch NG125L 1-pole B 80A
 |
Schneider Electric 19084 terminal covers 1-pole
Terminal screw cover for NG125. 1-pole. Prevents any contact with the terminal screws. Offers protection against direct contact (IP 40- in the distributor, IP 20- device alone). Class II for steel or ... Lieske Part No.: 105416 Mfg Part No: 19084 |
43,03 EUR 44,85 EUR
 ≈ £35.93 | ≈ $48.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19067 undervoltage release MN 230-240 VAC
Undervoltage release Acti 9 MN. Operating voltage (Ue) 230-240V AC. Causes the device with which it is combined to trip when the input voltage drops. Prevents the device from closing until the input ... Lieske Part No.: 376237 Mfg Part No: 19067 |
173,38 EUR 180,68 EUR
≈ £144.77 | ≈ $194.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19072 auxiliary switch 1W OF 1W SD 240 V AC 6 A
Auxiliary switch + fault signaling switch Acti 9 OF+SD. For NG125 and FI block Vigi NG125, 1W. Remote signaling and evaluation of the switch position and fault tripping of the NG125. Lieske Part No.: 376244 Mfg Part No: 19072 |
53,77 EUR 56,03 EUR
≈ £44.90 | ≈ $60.28
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19071 auxiliary switch 2W 240 VAC 6 A
Auxiliary switch Acti 9 OF/OF. For NG125 and FI block Vigi NG125, 2W, 250V AC. 2 changeover contacts, to indicate the switching position of the NG125. Lieske Part No.: 464197 Mfg Part No: 19071 |
54,34 EUR 56,63 EUR
≈ £45.37 | ≈ $60.92
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19064 operating current release MX 230-415 V AC 110-130 V
Acti 9 MX shunt release + auxiliary contact OF. Operating voltage (Ue) 230-415V AC, 110-130V DC. Causes the associated device to trip when the shunt release is activated. Lieske Part No.: 592870 Mfg Part No: 19064 |
129,67 EUR 135,14 EUR
≈ £108.27 | ≈ $145.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19090 locking elements Ng125 (4 pcs)
Locking element for NG125. In the ON or OFF position of the NG125 1-pole and 2-pole circuit breaker. In the ON position of the NG125 3-pole and 4-pole circuit breaker. This locks the circuit breaker ... Lieske Part No.: 592882 Mfg Part No: 19090 |
40,09 EUR 41,78 EUR
≈ £33.48 | ≈ $44.94
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19091 multiple connection terminals (4 pcs)
Multiple cable clamps for NG125. Tightening torque 2Nm, stripping length 11mm. Connection terminals for 3 copper conductors. Rigid up to 16mm², flexible up to 10mm². PU - 4 pieces per bag. Lieske Part No.: 592891 Mfg Part No: 19091 |
136,80 EUR 142,56 EUR
≈ £114.23 | ≈ $153.35
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19061 undervoltage release MNx 220-240 VAC
Undervoltage release Acti 9 MNx. Operating voltage (Ue) 220-240V AC. The associated device is triggered by opening the control circuit. A drop in the supply voltage does not trigger the associated ... Lieske Part No.: 1773550 Mfg Part No: 19061 |
202,35 EUR 210,87 EUR
≈ £168.96 | ≈ $226.83
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19094 cable lug 70 mm² for NG125
Small cable lug for NG125. Tightening torque 6Nm, suitable for NG125 and Vigi NG125. Connection sizes 80 to 125 A. Copper terminals - flexible cable up to 50 mm², rigid copper cable up to 70 mm². Lieske Part No.: 1773663 Mfg Part No: 19094 |
61,66 EUR 64,25 EUR
≈ £51.49 | ≈ $69.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19093 connection kit cable lug without rail
Screwing device for cable lug for NG125. Insulation voltage (Ui) 1000V, tightening torque 6Nm, suitable for NG125 and Vigi NG125. Installation upstream or downstream. Connection sizes 80 to 125 A. Lieske Part No.: 1773664 Mfg Part No: 19093 |
25,08 EUR 26,14 EUR
≈ £20.94 | ≈ $28.11
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19080 connection covers 1-pole
Terminal cover for circuit breaker NG125. 1-pole, insulation voltage (Ui) 1000V (Ph/Ph), suitable for NG125. Prevents any contact with the connection terminals. Offers protection against direct ... Lieske Part No.: 1773668 Mfg Part No: 19080 |
66,22 EUR 69,00 EUR
≈ £55.29 | ≈ $74.23
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19066 MX+OF 24 V AC 24 V DC
Acti 9 MX shunt release + auxiliary contact OF. Operating voltage (Ue) 24V AC, 24V DC. Causes the associated device to trip when the shunt release is activated. Lieske Part No.: 1773673 Mfg Part No: 19066 |
129,67 EUR 135,14 EUR
≈ £108.27 | ≈ $145.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19095 aluminium conductor cage clamps
Aluminium conductor cage clamp for NG125. Tightening torque 6Nm, suitable for NG125 and Vigi NG125. Connection sizes 80 to 125 A. For aluminium conductors from 25 to 70mm². PU - 4 pieces per bag. Lieske Part No.: 1773677 Mfg Part No: 19095 |
74,48 EUR 77,62 EUR
≈ £62.19 | ≈ $83.49
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Schneider Electric 19096 3xmultiple connection terminals set=3 pcs
Multiple cable clamps for NG125. Tightening torque 2Nm, stripping length 11mm. Connection terminals for 3 copper conductors. Rigid up to 16mm², flexible up to 10mm². Pack of 3 per bag. Lieske Part No.: 1774531 Mfg Part No: 19096 |
126,35 EUR 131,67 EUR
≈ £105.50 | ≈ $141.64
Made to order · Delivery time approx. 20 workdaysinfo_outline
|