Installation Material from Rittal

The Rittal cable gland SZ 2411601 is a cable gland made of polyamide 6 with integrated clamping lamellae, designed for secure and cable-friendly connection of cables with a diameter of 3 to 6.5 mm. The product is supplied in a packaging unit of 50 pcs and is suitable for use in industrial plants as well as in environments with high requirements for mechanical and chemical resistance. The gland features an M12 x 1.5 thread with a thread length of 8 mm and is equipped with a sealing made of CR/NBR, ensuring a tight seal.

Applications
The cable gland SZ 2411601 is suitable for use in enclosures, control and regulation technology, as well as in automation technology. It is particularly suitable for applications in outdoor environments or in damp, dusty conditions, as it features the protection rating IP 68 according to IEC 60 529. This means it is dust-tight and waterproof, even under a pressure of 5 bar for 30 minutes. The gland is also certified with the type rating Type 4X according to UL 50E, which includes a high protection class against splashing water, dust, and mechanical damage.

Functions and Equipment in Detail
The integrated clamping lamellae ensure even clamping and cable-friendly strain relief, protecting the cable from mechanical stress. The gland is supplied with a lock nut, which is included in the same packaging unit. The colour of the gland is RAL 7035, corresponding to a grey, neutral tone that blends well in industrial environments.

Technology Explained Simply
The gland consists of a robust polyamide 6 body, offering high mechanical strength and chemical resistance. The CR/NBR sealing ensures a tight seal against dust and moisture. The IP 68 protection rating means the gland remains watertight even under high water pressure (5 bar) for 30 minutes, making it suitable for use in wet or submerged installations. The operating temperature range of -30 °C to 100 °C allows use in a wide range of environments, from cold to hot industrial plants. The specified torque is 1.8 Nm, ensuring the gland is correctly tightened without damaging the thread. The wrench size of 15 mm allows installation with a standard wrench.

Compatibility and Accessories
The cable gland SZ 2411601 is designed for cables with a diameter of 3 to 6.5 mm. It is intended for use in enclosures and other closed housings where a tight and secure connection is required. The gland features an M12 x 1.5 thread, commonly used in many industrial plants. The integrated lock nut enables easy installation without additional ordering.

Installation and Mounting
Installation is carried out by tightening the gland with a wrench to the specified torque of 1.8 Nm. The integrated clamping lamellae ensure the cable is evenly clamped, preventing damage from tensile stress. The gland is screwed into the enclosure, with the sealing providing a tight seal. The lock nut is supplied together with the gland and is required for secure fastening.

Operational Advantages
The cable gland SZ 2411601 offers high mechanical and chemical resistance, making it suitable for demanding environments. The integrated clamping lamellae protect the cable from mechanical stress and extend the service life of the connection. The IP 68 protection rating and UL 50E Type 4X certification ensure high safety and reliability. The supply of gland and lock nut in a single packaging unit reduces ordering effort and storage requirements, making maintenance and installation more efficient. The operating temperature range of -30 °C to 100 °C allows use in a wide range of industrial applications.
Lieske Part No.: 539381

The Rittal SZ 2597000 is a cable tie with a length of 150 mm, specifically developed for quick and secure fastening of cables to enclosure profiles or mounting system components. The product is part of the Rittal system and enables efficient cable routing in enclosures and technical units by being directly clipped into the system round hole pattern. The simple tool-free installation without additional fastening elements makes the cable tie particularly suitable for use in industrial electrical and IT installations.

Applications
The cable tie is primarily used in the field of installation technology, especially in enclosures, control and distribution cabinets, as well as mounting systems. It is used for organizing and securing cables, wiring, and cable bundles to ensure structured and clear cabling. The use in the system round hole pattern allows for quick integration into existing Rittal systems, reducing installation time.

Functions and Features in Detail
The SZ 2597000 is designed as a cable tie that stands out for its easy handling. It is directly clipped into the round hole pattern of the enclosure profile or mounting system, achieving a secure fastening without additional tools or screws. The length of 150 mm allows for secure fastening of cables of medium thickness and length, with the exact clamping force ensured by the material strength of the cable tie. The packaging unit contains 100 pcs, suitable for larger installations or series mounting.

Technology Explained Simply
The cable tie is made of a flexible yet stable plastic material designed for mechanical stress in industrial environments. The length of 150 mm provides sufficient clearance to securely fasten cable bundles without the fastening being too tight or too loose. The clip-in function into the system round hole pattern eliminates the need for additional fastening elements such as screws or brackets, speeding up installation and simplifying work processes. Use in Rittal systems ensures high compatibility with standard profiles and mounting systems.

Compatibility and Accessories
The cable tie is specifically developed for use with Rittal enclosure profiles and mounting system components. It fits into the system round hole pattern, which is standard in many Rittal products. Compatibility with other manufacturers or systems is not explicitly confirmed, so compatibility with non-Rittal systems is not guaranteed.

Installation and Mounting
Mounting is done by simply clipping the cable tie into the round hole pattern of the enclosure profile or mounting system. No tools are required, and fastening is done without additional screws or brackets. The cables are then routed through the cable tie and tightened, achieving a neat and secure cabling. Installation is quick and can also be performed in limited space within enclosures.

Operational Advantages
The use of the Rittal SZ 2597000 offers a lightning-fast solution for cable fastening, reducing time and effort. Use in the system round hole pattern ensures secure and durable fastening without requiring additional mounting elements. The packaging unit with 100 pcs enables efficient use in larger projects. The cable ties are designed for industrial environments and support structured and clear cabling in enclosures and mounting systems.
Lieske Part No.: 210968

The Rittal AX 5051407 is a self-tapping screw with internal hex 25, specifically designed for mounting in metal and plastic components in the field of electrical and IT technology. This screw is commonly used in enclosures, housings, and other installation elements where secure fastening without prior tapping is required. The internal hex 25 design enables precise and powerful engagement with a compatible screwdriver or electric screwdriver, ensuring secure mounting even under high demands.

Self-tapping screw
The screw is designed as self-tapping, meaning it creates its own thread in the workpiece during insertion. This eliminates the need for pre-drilling and tapping, reducing mounting time and labor effort. The screw is therefore particularly suitable for materials such as galvanized steel sheet, aluminium, or plastics that have sufficient strength for self-tapping. The thread profile is designed to create a secure and tight connection without damaging the workpiece.

Technical design and dimensions
The screw features an M5 thread, which represents a standard size for industrial applications. The thread length is 10 mm, sufficient for secure anchoring in materials with a thickness of approximately 1 to 3 mm. The internal hex profile with designation 25 corresponds to a specific shape that ensures optimal torque transmission and secure tightening.

Applications
The AX 5051407 is primarily used in electrical and IT installations, especially for mounting enclosures, control cabinets, distribution boxes, and other housings. It is suitable for applications requiring fast and reliable fastening without prior thread preparation.

Compatibility and accessories
The screw is compatible with tools featuring an internal hex key with designation 25, such as screwdrivers or electric screwdrivers with corresponding bits. The packaging unit contains 48 pieces, sufficient for small to medium-sized mounting tasks.

Mounting and installation
Mounting is performed by inserting the screw into the workpiece using an appropriate tool. The screw cuts its own thread during insertion, creating a secure connection. It is important that the workpiece is sufficiently rigid to hold the thread and that the screw is not over-tightened to avoid material damage.

Operational advantages
The self-tapping design reduces mounting time, as no pre-drilling or tapping is required. The internal hex profile ensures secure and precise tightening, making the mounting reliable even under high demands. The screw is available in a packaging unit of 48 pieces, which is practical for series mounting or smaller projects. The standard dimensions M5 and 10 mm allow broad applicability in various applications within electrical and IT technology.
Lieske Part No.: 1101899

The Rittal VX 8800.770 is an insulation cap for screw heads, designed for electrical insulation within cable ducts and similar installation environments. The product prevents unintended electrical contacts, particularly in areas where screw heads may come into contact with other conductors or metallic components. The cap is placed directly onto the screw head, ensuring a secure separation of electrical potentials. The packaging unit contains 100 pieces, suitable for use in larger installation projects.

Applications
The insulation cap is primarily used in the field of electrical installation, especially during the mounting of cable ducts, enclosures, or other metallic housings where screw heads may be electrically conductive. It prevents short circuits and enhances safety when working with electrical systems. Typical applications include industrial environments, machine wiring, or building electrotechnics, where targeted insulation of fastening elements is required.

Functions and Features in Detail
The cap is made of plastic, ensuring high electrical insulation and mechanical stability. The material is suitable for use in electrical installations and provides sufficient resistance against mechanical stresses that may occur during mounting. The cap’s shape is designed to fit securely onto the screw head, providing a tight cover. No additional tools or adhesives are required — the cap is simply pushed onto the screw head.

Technology Explained Simply
The insulation cap acts as an electrical isolation mechanism. Since screw heads are typically metallic and conductive, they can cause short circuits if they come into contact with other conductors or housing parts. The plastic cap prevents this electrical connection by fully enclosing the screw head. This is especially important in cable ducts, where multiple conductors are installed in close proximity. The cap is not designed for mechanical load-bearing but exclusively for electrical insulation.

Compatibility and Accessories
The insulation cap is specifically designed for screw heads used in cable ducts or similar installations. As compatible accessories, an internal hexagon sheet metal screw, type 5.5 L13 mm (300 pieces), is offered for use in combination with the insulation cap. The cap is not calibrated to a specific screw size but adapts to the shape of the screw head, as long as the head has the required shape for insertion. Use with other screw types is possible, provided the geometric requirements are met.

Mounting and Installation
Installation is performed by simply pushing the cap onto the screw head after the screw has already been fastened into the component. No additional tools or adhesives are required. The cap fits securely by form-fit and remains in place during operation. Installation is quick and does not require special expertise. The cap can be applied directly before or after screw mounting, depending on the workflow.

Operational Advantages
Using the insulation cap increases electrical safety in installations by preventing unintended contacts between screw heads and other conductors. This reduces the risk of short circuits and enhances system reliability. The cap is easy to handle and requires no additional installation effort. The packaging unit of 100 pieces enables efficient use in larger projects, reducing labor time. The plastic material ensures long-term functionality without wear or corrosion.
Lieske Part No.: 1441672

The SV 9640900 is a slide nut from manufacturer Rittal, specifically designed for securing flat copper busbars and connection components to Maxi-PLS busbar systems. The product serves as a mechanical connection element that is inserted into the busbar profile after installation to securely fix threaded bolts. The slide nut is made of E-Cu (electro-copper), a material used in electrical engineering for its high electrical conductivity and mechanical stability. The thread size is M6, representing a standard size for fastening in enclosures and distribution systems. The product is used in Maxi-PLS series systems, particularly for profiles 45 S/45, which are employed in enclosures and distribution systems.

Applications

The slide nut is used in electrical installations and enclosure construction where flexible, retrofittable mounting of components onto busbars is required. It enables the fastening of flat copper busbars, which serve as main conductors or for power distribution, as well as connection components such as terminals or connectors. Its use is specifically intended for systems with Maxi-PLS 1600 and Maxi-PLS 2000, which are used in industrial and commercial facilities for power supply and distribution.

Functions and Features in Detail

The SV 9640900 is designed for retrofittable insertion into the busbar profile, enabling flexible mounting without prior drilling or additional fastening elements. The slide nut features an M6 thread, which connects with matching threaded bolts to securely fasten components. The E-Cu material ensures high electrical conductivity and mechanical strength, which is essential for reliable connections in electrical installations. The packaging unit contains 15 pieces, suitable for use in larger installations or series mounting.

Technology Explained Simply

The slide nut functions as an integrated fastening element inserted into the open profile of the Maxi-PLS busbar. The nut’s thread is fixed within the profile, allowing a threaded bolt to be screwed in from the outside. This enables quick and secure mounting of electrical components without requiring additional drilling or screw holes in the busbar. The use of E-Cu ensures that electrical conductivity between the busbar and the mounted component is maintained, which is critical for power distribution functionality.

Compatibility and Accessories

The slide nut is specifically designed for Maxi-PLS busbar profiles 45 S/45, used in Maxi-PLS 1600 and Maxi-PLS 2000 systems. As accessories, various threaded bolts are available, including M6 and M8 threaded bolts with a length of 35 mm, as well as connection bolts in different sizes (M10x35, M10x45, M10x55, M10x70, M10x80), suitable for connection sets and terminals. These elements can be combined with the slide nut to fulfill various mounting tasks in enclosures.

Installation and Mounting

Mounting is performed by simply inserting the slide nut into the open profile of the Maxi-PLS busbar. Positioning is done at the desired location, where the nut anchors itself within the profile. Subsequently, an M6 threaded bolt is screwed into the nut to secure the component (e.g., flat copper busbar or connection terminal). The mounting process requires no additional tools or drilling, speeding up installation and preserving the integrity of the busbar.

Operational Advantages

Using the SV 9640900 enables flexible, retrofittable mounting of components onto busbars without damaging the busbar structure. The high electrical conductivity of the E-Cu material ensures a reliable power connection, while mechanical stability securely holds the fastening. The packaging unit of 15 pieces is suitable for larger projects and reduces mounting time. Compatibility with various threaded bolts and connection components increases the product’s versatility in electrical installations.
Lieske Part No.: 837012

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444386
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M6
Length: 35 mm
Weight/pack: 0.06 kg
Lieske Part No.: 471918

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444379
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M8
Length: 35 mm
Weight/pack: 0.11 kg
Lieske Part No.: 506282

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Washers
Packs of: 8 pc(s).
EAN: 4028177606968
Customs tariff number: 73181900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M10
Length: 35 mm
Weight/pack: 0.26 kg
Lieske Part No.: 865530

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Washers
Packs of: 8 pc(s).
EAN: 4028177606999
Customs tariff number: 73181900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M10
Length: 70 mm
Weight/pack: 0.39 kg
Lieske Part No.: 653657