Installation Material from Phoenix Contact

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162266

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162270

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162273

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162276

Electronic device circuit breaker, 1-pos., active current limitation, status output and reset input, plug for base element.
Lieske Part No.: 162277

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit.
Lieske Part No.: 162790

Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector plug/socket
Lieske Part No.: 163446

Component connector, to connect 2-pos. components to the basic terminal block, to be secured with screw-type clamping units, 19 mm high, max. 16 A
Sales unit: 10 pieces
Lieske Part No.: 204093

Component plug, with universal diode, to connect 2-pos. components into the basic terminal block, height: 19 mm, color: Gray
Sales unit: 10 pieces
Lieske Part No.: 525702

Component connector, Pitch: 6 mm, Number of positions: 1, Color: gray
Sales unit: 10 pieces
Lieske Part No.: 545963

Component connector, Pitch: 6 mm, Number of positions: 1, Color: gray
Sales unit: 10 pieces
Lieske Part No.: 433559

Combination of type 2 surge protection and arrester backup fuse, with arrester monitoring, in combination with a status indicator and remote indication contact. Design: 5-conductor system (L1, L2, L3, N, PE), mounting on 60 mm system technology (power rail system)
Lieske Part No.: 133576

BNC connector, double-deck, for mounting on NS 32 or NS 35/7.5, wave resistance: 50 O
Sales unit: 10 pieces
Lieske Part No.: 610396

BNC connector, 2-pos., double-level, for mounting on NS 32 or NS 35/7,5, wave impedance: 75 Ω
Sales unit: 10 pieces
Lieske Part No.: 370147

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 18 mm, Lettering field: 18 x 5 mm
Sales unit: 10 pieces
Lieske Part No.: 101700

Wire bridge, Color: gray
Lieske Part No.: 142438

PCB header, nominal cross section: 2.5 mm², color: light gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: tin, contact type: pin, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, article family: MSTBO 2.5/..-G1L, pitch: 5 mm, mounting: wave soldering, pin layout: linear pinning, pin length [P]: 3.5 mm, number of soldering pins per potential: 1, plug-in system: COMBICON MSTB 2.5, locking: without, packaging type: packed in a cardboard box, article with side pin outlet on the left
Sales unit: 50 pieces
Lieske Part No.: 603186

PCB header, nominal cross section: 2.5 mm², color: light gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: tin, contact type: pin, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product family: MSTBO 2.5/..-G1R, pitch: 5 mm, connection type: pluggable, mounting: wave soldering, pin layout: linear pinning, pin length [P]: 3.5 mm, number of soldering pins per potential: 1, plug-in system: COMBICON MSTB 2.5, locking: without, packaging type: packed in a cardboard box, product with side pin outlet on the right
Sales unit: 50 pieces
Lieske Part No.: 603206

Shield connection clip for printed circuit terminal block
Sales unit: 10 pieces
Lieske Part No.: 823083

Universal DIN rail adapter, for screwing on switchgear
Sales unit: 5 pieces
Lieske Part No.: 680638

Component housing with vents, Lower part, Cross connection: integrated bus connector, Color: green, Width: 22.5 mm, Constructional height: 114.5 mm, Number of positions cross connector: 10+2
Sales unit: 10 pieces
Lieske Part No.: 823230

Inline terminal for power distribution (GND), complete with accessories, (connector and labeling field) connections for GND
Lieske Part No.: 227278

Inline analog input terminal, complete with accessories (connector and labeling field), 8 channels, RTD (resistance temperature detector), 2, 3-wire connection method
Lieske Part No.: 483387

Inline, Digital input, Digital inputs: 4, 24 V DC, 3-conductor, Transmission speed in the local bus 500 kBit/s, Degree of protection IP20, including Inline connector and labeling field
Sales unit: 4 pieces
Lieske Part No.: 873829

Inline, Digital output, Digital outputs: 4, 24 V DC, 500 mA, 3-conductor, Transmission speed in the local bus 500 kBit/s, Degree of protection IP20, including Inline connector and labeling field
Sales unit: 4 pieces
Lieske Part No.: 418503

Inline analog output terminal, Inline ME variants (Machine Edition) complete with accessories (connector and labeling field), 2 outputs, 0 - 10 V, ±10 V, 2-conductor connection system
Lieske Part No.: 250436

MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with screw connection.
Lieske Part No.: 132607

Attachment plug with surge protection for mains sockets, optical power and fault display. For country-specific use in: D, A, I, NL, S, E, N, FIN
Lieske Part No.: 713728

Attachment connector with surge protection for mains sockets, mains control lamp, optical power and fault display. For country-specific use in: D, A, I, NL, S, N, FIN, E, P. Color: White
Lieske Part No.: 496491

PCB terminal, nominal current: 24 A, rated voltage (III/2): 630 V, nominal cross section: 2.5 mm², number of rows: 1, number of positions per row: 3, product family: MKDSO 2.5 HV/..-R, pitch: 7.5 mm, connection type: screw connection with tension sleeve, assembly: wave soldering, connection direction conductor/PCB: 0 °, color: light gray, pin layout: linear pinning, pin length [P]: 3.5 mm, number of soldering pins per potential: 1. Product with lateral pin outlet on the right
Sales unit: 50 pieces
Lieske Part No.: 466922

Installation component housing, Upper part, Color: light gray, Width: 17.8 mm, Constructional height: 62.2 mm
Sales unit: 10 pieces
Lieske Part No.: 132397

Installation component housing, Housing cover, Color: light gray, Width: 17.8 mm
Sales unit: 10 pieces
Lieske Part No.: 132278

Installation component housing with vents, Lower part, Cross connection: DIN rail bus connector, Color: black, Width: 17.8 mm, Constructional height: 49 mm, Number of positions cross connector: 16
Sales unit: 10 pieces
Lieske Part No.: 132406

Plug component, Nominal current: 3 A, Number of positions: 16, Pitch: 2.54 mm, Color: jet black
Sales unit: 10 pieces
Lieske Part No.: 132661

14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V DC
Sales unit: 10 pieces
Lieske Part No.: 957521

14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC/DC
Sales unit: 10 pieces
Lieske Part No.: 668261

VARIOFACE module for connecting a RJ45 socket with spring-cage double connection terminal blocks in direct plug-in method.
Lieske Part No.: 153712

3-phase loop bridge for 2 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 260308

3-phase loop bridge for 3 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 624510

3-phase loop bridge for 4 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 540144

3-phase loop bridge for 5 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 154228

3-phase loop bridge for 6 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 154229

3-phase loop bridge for 7 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 154233

3-phase loop bridge for 8 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 154279

3-phase loop bridge for 9 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 154281

3-phase loop bridge for 10 CONTACTRON modules, with screw connection and 22.5 mm housing width, connecting cable: 0.3 m, with ferrules.
Lieske Part No.: 154299

RS-485 JBUS/MODBUS communication module for EEM-MA600
Lieske Part No.: 157625

Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC/DC, plug-in spring-cage terminal block
Lieske Part No.: 157438

Analog/digital I/O extension module with 2 digital inputs/outputs (0...250 V AC/DC) and 1 analog input (0/4...20 mA) and output (0/4 ... 20 mA, 0...10 V), with screw connection, incl. DIN rail connector
Lieske Part No.: 159044

Digital I/O extension module with 4 digital inputs (0...250 V AC/DC), with screw connection, incl. DIN rail connector
Lieske Part No.: 162187