Products of Niedax
Categories with products from Niedax
- Electrics ➤ Industrial Material ➤ Enclosures / Chassis ➤ Profile, hat, copper busbars ( 85 )
- Electrics ➤ Installation ➤ Distributor Cabinets ➤ Connection columns ( 1 )
- Electrics ➤ Installation ➤ Grounding Systems ➤ Grounding material ( 5 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Isolation, tissue, guard bands ( 1 )
- Electrics ➤ Installation ➤ Pipes ➤ PVC - Conduit Accessories ( 5 )
- Electrics ➤ Installation ➤ Wiring systems ➤ Wiring ducts ( 2 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 13 )
- Technology ➤ Tools ➤ Miscellaneous ( 9 )
 |
 Niedax WTRDV 500 E3 WTRDV500E3Niedax WTRDV500E3 WTRDV 500 E3 lid f. Tee B, 504 mm stainless steel, material no .: 1.4301Cover for T-piece, with captive pre-assembled rotary latch locks, height-independent cover for wide-span T-piece. Due to external influences, such as wind loads, use outdoors is only possible with ... Lieske Part No.: 193609 Mfg Part No: WTRDV500E3 Type: WTRDV 500 E3 |
1.123,65 EUR
 ≈ £957.35 | ≈ $1,284.33 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WTRDV 600 WTRDV600Niedax WTRDV 600 cover for T-piece B604mm DIN EN 10346 with twist lock Cover for T-piece, with captive pre-assembled rotary latch locks, height-independent cover for wide-span T-piece. Due to external influences, such as wind loads, use outdoors is only possible with ... Lieske Part No.: 467792 Mfg Part No: WTRDV600 Type: WTRDV 600 |
829,62 EUR
≈ £706.84 | ≈ $948.26 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WWA100Niedax WWA100 wall outlet angle WWA 100 galvanized, NIEDAX - Make: WWA wall outlet angle, asymmetric, suitable for balancing floor, ceiling and wall fixtures of profiles U 5 / ..., U 5 5 / ..., U 6 4 / ..., U / ... and for cable ladders system KL ... Lieske Part No.: 878824 Mfg Part No: WWA100 |
14,65 EUR
≈ £12.48 | ≈ $16.74 plus delivery charges: 53,00 €
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Niedax WWA 100 E3 WWA100E3Niedax WWA100E3 Wall Support asym stainless steel Wall connection bracket, asymmetrical, for floor, ceiling and wall mounting, including appropriate stainless steel fastening accessories. Use for: Profiles U 50/... E3, U 4530/... E3, U 6040/... E3 ... Lieske Part No.: 280346 Mfg Part No: WWA100E3 Type: WWA 100 E3 |
1.049,40 EUR
≈ £894.09 | ≈ $1,199.46 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WWI80Niedax WWI80 wall outlet angle WWI 80 galvanized, NIEDAX - Make: WWI 80 wall outlet angle for wall mounting of profiles I 80 / ... Accor ding to DIN 1025, Type Vertical ladders STIC ... and STIW ... dip galvanized to DIN EN ISO 1461, including ... Lieske Part No.: 187551 Mfg Part No: WWI80 |
717,75 EUR
≈ £611.52 | ≈ $820.39 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WWS10Niedax WWS10 wall brackets / wall terminal, MRP galvanized 10 NIEDAX - Make: WWS Wall outlet angle / wall terminal, for clamping the cable ladders STL ... and STM ... to the wall with wall distance, dip galvanized to DIN EN ISO 46 . Fixing holes: ... Lieske Part No.: 876838 Mfg Part No: WWS10 |
341,55 EUR
≈ £291.00 | ≈ $390.39 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WWU150Niedax WWU150 wall outlet angle EMU 150 galvanized, NIEDAX - Brand: EMU 150 Wall connection profile to fasten profiles U 50 / ..., U 5050 / ..., U 6040 / ..., U 100 / ..., for cable ladders ... KL, for cable ladders ... STL, STM. .. and stuc ... Lieske Part No.: 356598 Mfg Part No: WWU150 |
608,85 EUR
≈ £518.74 | ≈ $695.92 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WWU150/8Niedax WWU150/8 wall outlet angle EMU 150/8, galvanized NIEDAX - Brand: EMU 5/8 wall outlet angle for floor and wall fastening cable ladders system ... KL, vertical risers systems ... STL, STM ..., stuc ... Wide span cable tray system WRL ... and wide ... Lieske Part No.: 993063 Mfg Part No: WWU150/8 |
11,98 EUR
≈ £10.21 | ≈ $13.69 plus delivery charges: 53,00 €
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Niedax WWU150/8E3Niedax WWU150/8E3 Wall Support EMU 150/8 E3 NIEDAX - Brand: EMU 150/8 E3 wall outlet angle for floor and wall attachment of cable ladder system KL ... E3, vertical risers systems STL ... E3, STM ... E3 ... E3 STUC, Wide span cable tray system ... Lieske Part No.: 483979 Mfg Part No: WWU150/8E3 |
1.118,70 EUR
≈ £953.13 | ≈ $1,278.67 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax WWU 150/8 E5 WWU150/8E5Niedax WWU150/8E5 wall connection bracket isosceles stainless steel Wall connection bracket, isosceles, for floor, ceiling and wall mounting, including appropriate stainless steel mounting accessories. For use in functional maintenance, please observe additional ... Lieske Part No.: 394711 Mfg Part No: WWU150/8E5 Type: WWU 150/8 E5 |
1.044,45 EUR
≈ £889.87 | ≈ $1,193.81 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
|
|
Niedax ZC 100 S ZC100SNiedax ZC100S ZC 100 S Zentralabhängung C-Profil 133x110mm 0,9 kN Stahl bandverz Zentralabhängung, C-förmig, Bügel zur Deckenmontage mittels Gewindestab M 10/... sowie zur Wandbefestigung. Die Tragfähigkeitsangaben gelten nur bei ausreichender Verankerung mit dem tragenden ... Lieske Part No.: 705267 Mfg Part No: ZC100S Type: ZC 100 S |
425,70 EUR
≈ £362.70 | ≈ $486.58 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
|
|
Niedax ZC 200 S ZC200SNiedax ZC200S ZC 200 S Zentralabhängung C-Profil 236x210mm 0,8 kN Stahl bandverz Zentralabhängung, C-förmig, Bügel zur Deckenmontage mittels Gewindestab M 10/... sowie zur Wandbefestigung. Die Tragfähigkeitsangaben gelten nur bei ausreichender Verankerung mit dem tragenden ... Lieske Part No.: 705268 Mfg Part No: ZC200S Type: ZC 200 S |
603,90 EUR
≈ £514.52 | ≈ $690.26 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZCB100Niedax ZCB100 Zentralabhängung ZCB 100, NIEDAX - Make: ZCB 100 Zentralabhängung, C, ceiling brackets (central suspension) using threaded rod M 10 dip galvanized to DIN EN ISO 1461. The carrying capacity apply only with adequate ... Lieske Part No.: 370157 Mfg Part No: ZCB100 |
286,11 EUR
≈ £243.77 | ≈ $327.02 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZCB 120 ZCB120Niedax ZCB120 ZCB 120 Zentralabhängung , Central suspension, C-bracket for ceiling mounting (central suspension) using an M 10 threaded rod. The load-bearing capacity information only applies if the supporting surface is sufficiently ... Lieske Part No.: 248198 Mfg Part No: ZCB120 Type: ZCB 120 |
330,66 EUR
≈ £281.72 | ≈ $377.94 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZCB 150 ZCB150Niedax ZCB 150 central suspension C-bracket 110x160mm 0.6 kN hot-dip galvanized Central suspension, C-bracket for ceiling mounting (central suspension) using an M 10 threaded rod. The load-bearing capacity information only applies if the supporting surface is sufficiently ... Lieske Part No.: 633058 Mfg Part No: ZCB150 Type: ZCB 150 |
330,66 EUR
≈ £281.72 | ≈ $377.94 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZCB 200 ZCB200Niedax ZCB200 ZENTRALABHAENGUNG ZCB20, Central suspension, C-bracket for ceiling mounting (central suspension) using an M 10 threaded rod. The load-bearing capacity information only applies if the support is sufficiently anchored to the ... Lieske Part No.: 160287 Mfg Part No: ZCB200 Type: ZCB 200 |
364,32 EUR
≈ £310.40 | ≈ $416.42 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZCB300Niedax ZCB300 Zentralabhängung ZCB 300, NIEDAX - Make: ZCB 300 Zentralabhängung, C, ceiling brackets (central suspension) using threaded rod M 10 dip galvanized to DIN EN ISO 1461. The carrying capacity apply only with adequate ... Lieske Part No.: 324019 Mfg Part No: ZCB300 |
486,09 EUR
≈ £414.15 | ≈ $555.60 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZCB 400 ZCB400Niedax ZCB400 central suspension C-bracket, 235x410mm, 0.2 kN hot-dip galvanized Central suspension, C-bracket for ceiling mounting (central suspension) using an M 10 threaded rod. The load-bearing capacity information only applies if the supporting surface is sufficiently ... Lieske Part No.: 1315701 Mfg Part No: ZCB400 Type: ZCB 400 |
601,92 EUR
≈ £512.84 | ≈ $687.99 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZKF1Niedax ZKF1 zinc dust paint majors 1, NIEDAX - Make: all majors Zinc dust paint for repairing galvanized components, meets the requirements of DIN EN ISO 46 . For dilution only ZKV use! Qty: NIEDAX liter model no. Majors ... Lieske Part No.: 547851 Mfg Part No: ZKF1 |
332,15 EUR
≈ £282.99 | ≈ $379.65 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZKM 6X16 ZKM6X16Niedax ZKM6X16 ZKM 6 X 16 Zylinderkopfschr. , Flat head screw with slot according to DIN EN ISO 1580, including toothed flange nut according to DIN EN 1661, for securing the mesh cable trays with the mesh cable tray suspension brackets GRAB 10. Lieske Part No.: 513370 Mfg Part No: ZKM6X16 Type: ZKM 6X16 |
51,58 EUR
≈ £43.95 | ≈ $58.96 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZKSNiedax ZKS Zinc Spray (400ml) NIEDAX - Brand: ZKS zinc spray for touch up of galvanized coatings in dry areas, the composition of the zinc sprays meets the requirements of DIN EN ISO 1461. Qty: 400 ml spray NIEDAX Model No.: ZKS. Lieske Part No.: 206034 Mfg Part No: ZKS |
99,30 EUR
≈ £84.60 | ≈ $113.50 plus delivery charges: 53,00 €
Delivery time from supplier's stock (ca.) 1 workdaysinfo_outline
|
 |
Niedax ZKU 150 ZKU150Niedax ZKU 150 central suspension 472x160mm 2.0 kN hot-dip galvanized Central suspension for the centric installation of cable trays and ladders on the profile or hanging post, including hot-dip galvanized fastening accessories. The load-bearing capacity information ... Lieske Part No.: 1315986 Mfg Part No: ZKU150 Type: ZKU 150 |
155,43 EUR
≈ £132.43 | ≈ $177.66 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZKU200Niedax ZKU200 Zentralabhängung 210mm ZKU 200, hot-dip galvanized NIEDAX - Make: ZKU 2 Zentralabhängung for suspended support system HUF 5 / ..., for the installation of cable trays and ladders, dip galvanized to DIN EN ISO 46 Including dip galvanized share ... Lieske Part No.: 896667 Mfg Part No: ZKU200 |
163,05 EUR
≈ £138.92 | ≈ $186.37 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|
 |
Niedax ZKU300310mm Niedax Zentralabhängung console ZKU 300, hot-dip galvanized NIEDAX - Make: ZKU 3 Zentralabhängung for suspended support system HUF 5 / ..., for the installation of cable trays and ladders, dip galvanized to DIN EN ISO 46 Including dip galvanized share ... Lieske Part No.: 535402 Mfg Part No: ZKU300 |
170,48 EUR
≈ £145.25 | ≈ $194.86 plus delivery charges: 53,00 €
Delivery time on requestinfo_outline
|