Installation Material from Niedax

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 1.5 mm Rope length L: 4 m Load-bearing capacity F: 0.1 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1427334

No suspension
with cross-anchoring L = 5 meters - supports up to
kg, Ø: ca
mm Component / Type: with loop type: GAK
/ 5 item:
ST.
Sales unit: 10 pieces
Lieske Part No.: 918918

GRIPPLE set loop, quick hanging system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies when installed correctly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Perm. load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: Steel, galvanized.
Sales unit: 10 pieces
Lieske Part No.: 1426472

GRIPPLE set loop and express fastener, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1327262

GRIPPLE set loop and express fastener, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332692

No suspension
, 2, 3 with loop L = 3 meter assembly / type: Ø 2 mm Finish: # 2: loads up to 45 kg Type: GAK-2/3 Quantity:
ST.
Sales unit: 10 pieces
Lieske Part No.: 906754

GRIPPLE set loop and express fastener, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1327263

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 2 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: stainless steel, material no. 1.4401, 1.4404
Lieske Part No.: 1426473

Suspension No. 1, 2, 3 with loop L = 3 meters
Assembly / type: Ø 3 mm
Type: 3: supports up to 90 kg

Type: GAC-3/3
Package: 10 PCS.
Sales unit: 10 pieces
Lieske Part No.: 234786

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 5 m Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: stainless steel, material no. 1.4401, 1.4404
Sales unit: 10 pieces
Lieske Part No.: 1426474

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 4.75 mm Rope length L: 2 m Load-bearing capacity F: 2.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426012

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 4.75 mm Rope length L: 3 m Load-bearing capacity F: 2.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426463

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 4.75 mm Rope length L: 4 m Load-bearing capacity F: 2.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426440

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 1 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1426428

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 10 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1427299

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 2 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1427300

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to assembly according to regulations. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 3 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1190060

GRIPPLE set loop, quick suspension system, versatile and ready to use, for attachment to steel, concrete or wooden supports. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with loop end 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 6 mm Rope length L: 5 m Load-bearing capacity F: 3.25 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Lieske Part No.: 1427301

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319704

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 10 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319662

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Eyelet Ø: 6.5 mm Permissible load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319666

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319667

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 4 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319665

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319664

GRIPPLE set with straight lug/eyelet for M 6, quick suspension system, versatile and ready to use, for fastening to supporting structures using a screw and nut, for fastening with self-drilling screws and for fastening to any M 6 external thread. The load-bearing capacity F only applies to correct assembly. Set consists of: 1 cut-to-length wire rope with lug/eyelet end 1 self-locking GRIPPLE for quick fastening 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 8 m Eyelet Ø: 6.5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1319663

No suspension
, 2, 3 with L = 3 m cross-anchoring assembly / type: Ø ca
mm Design: No
: Supports up to
kg Type: GAQ-
/ 3 Quantity:
ST.
Sales unit: 10 pieces
Lieske Part No.: 972484

No suspension
with cross-anchoring L = 5 meters - supports up to
kg, Ø: ca
mm Component / Type: with cross-anchoring Type: GAQ-
/ 5 item:
ST.
Sales unit: 10 pieces
Lieske Part No.: 824585

Suspension No. 1, 2, 3 with L = 3 m cross-anchoring
assembly / type: Ø 2 mm
Finish: # 2: loads up to 45 kg Type: GAQ-2/3


Package: 10 PCS.
Sales unit: 10 pieces
Lieske Part No.: 670648

GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct installation. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 1 m Drill hole Ø: 10 mm Load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316144

GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct installation. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 10 m Drill hole Ø: 10 mm Permissible load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1316185

GRIPPLE set cross anchor, quick suspension system, versatile and ready to use, for attachment to sheet steel roofs and suspended ceilings. The load-bearing capacity F only applies to correct installation. Set consists of: 1 cut-to-length wire rope with cross anchor for drill hole and end sleeve 1 self-locking GRIPPLE for quick attachment 1 GRIPPLE adjustment/release pin (1x included for each smallest PU) Dimensions (approx. dimensions) Rope Ø: 3 mm Rope length L: 3 m Drill hole Ø: 10 mm Permissible load-bearing capacity F: 0.9 kN (5-fold safety against breakage) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 426864

GRIPPLE rope sheathing, for GRIPPLE wire ropes made of galvanized steel or stainless steel to protect against condensation when in contact with pipes, to reduce noise on pipes and to minimize friction between metals. Dimensions (approx. dimensions) for rope Ø: 2 mm Length: 25 m Color: black Material: Polyurethane (PUR)
Lieske Part No.: 1316179

GRIPPLE trapezoidal hook and express fastener, quick suspension system, versatile and ready to use, for fastening to trapezoidal sheet metal ceilings. The load-bearing capacity F only applies if the ceiling is sufficiently anchored to the supporting surface and installed correctly. Make sure that the selected end is suitable for the respective support structure and follow the manufacturer's recommendations for all installations. Set consists of: 1 cut-to-length wire rope with trapezoidal sheet hook 1 self-locking GRIPPLE for quick fastening with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 1 m Hook Ø: 5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage was calculated on a 2 mm trapezoidal sheet) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 169250

GRIPPLE trapezoidal hook and express fastener, quick suspension system, versatile and ready to use, for fastening to trapezoidal sheet ceilings. The load-bearing capacity F only applies if the ceiling is sufficiently anchored to the supporting surface and installed correctly. Make sure that the selected end is suitable for the respective support structure and follow the manufacturer's recommendations for all installations. Set consists of: 1 cut-to-length wire rope with trapezoidal sheet hook 1 self-locking GRIPPLE for quick fastening with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 2 m Hook Ø: 5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage was calculated on a 2 mm trapezoidal sheet) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332691

GRIPPLE trapezoidal hook and express fastener, quick suspension system, versatile and ready to use, for fastening to trapezoidal sheet ceilings. The load-bearing capacity F only applies if the ceiling is sufficiently anchored to the supporting surface and installed correctly. Make sure that the selected end is suitable for the respective support structure and follow the manufacturer's recommendations for all installations. Set consists of: 1 cut-to-length wire rope with trapezoidal sheet hook 1 self-locking GRIPPLE for quick fastening with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 3 m Hook Ø: 5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage was calculated on a 2 mm trapezoidal sheet) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 1332690

GRIPPLE trapezoidal hook and express fastener, quick suspension system, versatile and ready to use, for fastening to trapezoidal sheet ceilings. The load-bearing capacity F only applies if the ceiling is sufficiently anchored to the supporting surface and installed correctly. Make sure that the selected end is suitable for the respective support structure and follow the manufacturer's recommendations for all installations. Set consists of: 1 cut-to-length wire rope with trapezoidal sheet hook 1 self-locking GRIPPLE for quick fastening with express fastener (integrated adjustment system) Dimensions (approx. dimensions) Rope Ø: 2 mm Rope length L: 5 m Hook Ø: 5 mm Load-bearing capacity F: 0.45 kN (5-fold safety against breakage was calculated on a 2 mm trapezoidal sheet) Wire rope material: steel, galvanized
Sales unit: 10 pieces
Lieske Part No.: 369808

GRIPPLE angle protector No.2-3, to reinforce the support point and to effectively distribute the weight load, prevents rope friction, for GRIPPLE rope systems, halogen-free. Dimensions (approx. dimensions) Leg length: 50 mm for rope Ø: 1.5 - 3 mm Material: Polypropylene (PP)
Sales unit: 10 pieces
Lieske Part No.: 1316178

Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2985, 2986, 2988 and 2990 with 18 mm slot width Dimensions (approx. dimensions) Length L: 50 mm Width B: 21 mm Sliding nut height H: 17 mm Thread: M 10 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: grey polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 697283

Sliding nut with fixing aid, for C anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2996Z with 22 mm slot width wall bracket STRUT HKC 96Z/... hanging post and wall bracket STRUT HKC 96ZD/... Dimensions (approx. dimensions) Length L: 50 mm Width B: 25 mm Sliding nut height H: 18 mm Thread: M 10 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: gray polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 239560

Sliding nut with fixing aid, for C-anchor rails, for anchor rails with 18 mm slot width can only be used from the profile end with a fastening screw, not suitable in combination with the anchor rail 2986-1.75... for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on. Use for: anchor rails/profile rails 2985, 2986, 2988 and 2990 with 18 mm slot width Dimensions (approx. dimensions) Length L: 50 mm Width B: 21 mm Sliding nut height H: 17 mm Thread: M 12 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: grey polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 1332945

Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2996Z with 22 mm slot width wall bracket STRUT HKC 96Z/... hanging post and wall bracket STRUT HKC 96ZD/... Dimensions (approx. dimensions) Length L: 50 mm Width B: 25 mm Sliding nut height H: 18 mm Thread: M 12 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: gray polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 740765

Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2985, 2986, 2988 and 2990 with 18 mm slot width Dimensions (approx. dimensions) Length L: 50 mm Width B: 21 mm Sliding nut height H: 17 mm Thread: M 6 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: grey polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 1332811

Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2996Z with 22 mm slot width wall bracket STRUT HKC 96Z/... hanging post and wall bracket STRUT HKC 96ZD/... Dimensions (approx. dimensions) Length L: 50 mm Width B: 25 mm Sliding nut height H: 18 mm Thread: M 6 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: gray polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 1332944

Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2985, 2986, 2988 and 2990 with 18 mm slot width Dimensions (approx. dimensions) Length L: 50 mm Width B: 21 mm Sliding nut height H: 17 mm Thread: M 8 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: grey polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 168388

Sliding nut with fixing aid, for C-anchor rails, for precise fixing without slipping, especially in vertical applications, the sliding nut is screwed into the profile by 90° using the fixing aid and can be variably positioned by pressing on, can be used at any point in the profile. Use for: anchor rails/profile rails 2996Z with 22 mm slot width wall bracket STRUT HKC 96Z/... hanging post and wall bracket STRUT HKC 96ZD/... Dimensions (approx. dimensions) Length L: 50 mm Width B: 25 mm Sliding nut height H: 18 mm Thread: M 8 Strength class: 8 Sliding nut material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684 Fixing aid material: gray polyamide (PA), halogen-free
Sales unit: 100 pieces
Lieske Part No.: 193567

Sliding nut, without screw, can be used at any point with a fastening screw in the profile. Please observe additional regulations for use in functional maintenance! Use for: Anchor rails/profile rails 2985, 2986, 2988 and 2990 with 18 mm slot width 2996Z with 22 mm slot width Wall bracket STRUT HKC 96Z/... Hanging post and wall bracket HKC 96ZD/... Dimensions (approx. dimensions) Length L: 34 mm Width B: 15.5 mm Height H: 10 mm Thread: M 10 Strength class: 8 Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461/10684
Sales unit: 100 pieces
Lieske Part No.: 746614

NIEDAX - Make: GMZ M
2 F sliding nut, steel, channel bars for C-Model 2985, 2986, 2988 and 299 with slot width
8 mm (usable only by the end of the profile) and for C-anchor rails model 2987, 299
, 2992, 2994, 2995, 2996 and 2996Z with 22/26 mm slot width, GMZ M
2 F can be used at any point in the profile with fixing screw, hot-dip galvanized to DIN EN ISO
684th Dimensions L x W: 34 x
8 mm height of the sliding nut:
mm with thread M
2 Property class: 8 NIEDAX model no. GMZ M
2 F Type: GMZM
2F sales unit:
ST.
Sales unit: 100 pieces
Lieske Part No.: 749335

Gitterrinnen-Befestigungsklemme, horizontal/vertikal, zur Befestigung von Gitterrinnen an horizontalen und vertikalen Stahlträgerflanschen, eine wechselseitige Anordnung der Hakenschrauben gewährleistet eine sichere Befestigung der Gitterrinne an der Gitterrinnen-Befestigungsklemme, eine rechtwinklige Aussparung in den Schenkeln ermöglicht eine Anbringung an runden Stützenprofilen oder eine Montage von Kabelschutzrohren = Ø 30 mm, bei horizontaler Montage kann eine zusätzliche Abhängung mittels Gewindestab M 10/... an der Befestigungsklemmenspitze durch eine Lochung Ø 11 mm erfolgen, stirnseitig kann überdies eine Schraubabstandsschelle SASS 30 befestigt werden, durch Auslässe in der horizontalen Auflagefläche besteht die Möglichkeit zur Montage von bis zu 4 Bügelschellen B(K) 12 - 90 (je nach Größe) in Registerverlegung, einschließlich anteilmäßigen Befestigungszubehör aus Edelstahl, Werkstoff Nr. 1.4301, AISI 304. Verwendung für Gitterrinnen : GR... GRS... GRL... GRCI... MTC...100 - ... MTCG ... Abmessungen (ca. Maße) Gesamtlänge L : 173 mm Auflagelänge L1 : 148 mm Stahlträgerflanschstärke : = 20 mm Tragfähigkeit F1 horizontal bei L 1/2 : 0,6 kN Tragfähigkeit F2 vertikal bei L 1/2 : 0,9 kN Schraubenanzugsmoment : 4 Nm Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461 Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 832935

Gitterrinnen-Befestigungsklemme, horizontal/vertikal, zur Befestigung von Gitterrinnen an horizontalen und vertikalen Stahlträgerflanschen, eine wechselseitige Anordnung der Hakenschrauben gewährleistet eine sichere Befestigung der Gitterrinne an der Gitterrinnen-Befestigungsklemme, eine rechtwinklige Aussparung in den Schenkeln ermöglicht eine Anbringung an runden Stützenprofilen oder eine Montage von Kabelschutzrohren = Ø 30 mm, bei horizontaler Montage kann eine zusätzliche Abhängung mittels Gewindestab M 10/... an der Befestigungsklemmenspitze durch eine Lochung Ø 11 mm erfolgen, stirnseitig kann überdies eine Schraubabstandsschelle SASS 30 befestigt werden, durch Auslässe in der horizontalen Auflagefläche besteht die Möglichkeit zur Montage von bis zu 4 Bügelschellen B(K) 12 - 90 (je nach Größe) in Registerverlegung, einschließlich anteilmäßigen Befestigungszubehör. Verwendung für Gitterrinnen : GR... GRS... GRL... GRCI... MTC...100 - ... MTCG ... Abmessungen (ca. Maße) Gesamtlänge L : 173 mm Auflagelänge L1 : 148 mm Stahlträgerflanschstärke : = 20 mm Tragfähigkeit F1 horizontal bei L 1/2 : 0,6 kN Tragfähigkeit F2 vertikal bei L 1/2 : 0,9 kN Schraubenanzugsmoment : 4 Nm Werkstoff : Stahl, bandverzinkt nach DIN EN 10346 Verkaufseinheit: 1 ST.
Sales unit: 10 pieces
Lieske Part No.: 696019

Hook screw with M 6 thread, including toothed special flange nut similar to DIN EN 1661, for fastening the mesh cable trays to brackets, to mesh cable tray hanging posts, and to joint connectors. Please note additional regulations for use in functional maintenance! Can be used for: mesh cable trays up to max. 6 mm wire thickness Dimensions (approx. dimensions) Thread: M 6 Thread length: 15 mm Flange nut: Ø 17 mm Material: steel, galvanized in accordance with DIN EN ISO 4042, blue passivated.
Lieske Part No.: 187895