Installation Material from Niedax

NIEDAX - Manufacturer: B 38/2 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) and dual sinks (DW. ..) must be ordered separately. Occupancy above the other 2 cables for cable diameters 36 - 38 mm NIEDAX model no. B 38/2 E3 Type: B38/2E3 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 960423

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 34 - 38 mm
Sales unit: 100 pieces
Lieske Part No.: 994727

NIEDAX - Manufacturer: B 38 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 34 - 38 mm NIEDAX Model No.: B 38 E3 Type: B38E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 104933

NIEDAX - Manufacturer: B 42
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameters 38 - 42 mm

NIEDAX model no. B42 Type: B42


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 374715

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 979431

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 38 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 788694

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 40 - 42 mm
Sales unit: 50 pieces
Lieske Part No.: 122036

NIEDAX - Manufacturer: B 42 AL
Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO 1207, all aluminum, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 38 - 42 mm

NIEDAX model no. B 42 AL

Type: B42AL
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 408273

NIEDAX - Manufacturer: B 42 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameters 38 - 42 mm NIEDAX Model No.: B 42 E3 Type: B42E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 776218

NIEDAX - Manufacturer: B 46
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 42 - 46 mm

NIEDAX model no. B 46

Type: B46
Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 321019

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 667210

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 42 - 46 mm
Sales unit: 50 pieces
Lieske Part No.: 938206

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for Niedax anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 42 - 46 mm
Sales unit: 100 pieces
Lieske Part No.: 698783

NIEDAX - Manufacturer: B 46 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 42 - 46 mm NIEDAX Model No.: B 46 E3 Type: B46E3 item.
ST.
Sales unit: 100 pieces
Lieske Part No.: 718720

Series clamp, made of impact-resistant grey polystyrene, halogen-free, cylinder head screw M4x... in accordance with DIN EN ISO 1207 and sliding nut galvanised in accordance with DIN EN ISO 4042 or DIN 50962 / DIN EN ISO 19598, for NIEDAX C-profile rails 2970, 2971, 2972, 2975 and 2980 with 16-17 mm slot width. for cable Ø: 13 - 38 mm
Sales unit: 50 pieces
Lieske Part No.: 1426051

NIEDAX - Manufacturer: B 5 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter. 46-5 mm NIEDAX Model No: 5 Type B: B5 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 978013

Hammer foot clamp, with strip-galvanized steel pressure pan according to DIN EN 10346, hammer foot bracket hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter pans (GW...) and double pans (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 686809

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor channels 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 324458

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) and double trays (DW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Allocation one above the other: 2 cables for cable Ø: 48 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 589405

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 46 - 50 mm
Sales unit: 50 pieces
Lieske Part No.: 672244

NIEDAX - Manufacturer: B 5 E3 Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no.
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 46 - 5 mm NIEDAX Model Number: B type 5 E3: E3 B5 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 927194

NIEDAX - Manufacturer: B 54 Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN
346, Hammerfußbügel dip galvanized to DIN EN ISO
46
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter trays (GW. ..) must be ordered separately. For use in the functional integrity please follow additional rules! Occupancy:
Cable for cable diameter 5 - 54 mm NIEDAX Model No.: B54 Type: B54 sales unit.
ST.
Sales unit: 50 pieces
Lieske Part No.: 813317

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 50 - 54 mm
Sales unit: 50 pieces
Lieske Part No.: 182447

NIEDAX - Manufacturer: B 54 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 50 - 54 mm

NIEDAX model no. B54 E3

Type: B54E3
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 392957

NIEDAX - Manufacturer: B 58
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately are. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 54 - 58 mm

NIEDAX model no. B58 Type: B58


Item: 50 ST.
Sales unit: 50 pieces
Lieske Part No.: 165341

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 54 - 58 mm
Sales unit: 50 pieces
Lieske Part No.: 297505

NIEDAX - Manufacturer: B 58 Foot Hammer E3-clamp with pressure trough, completely made of stainless steel, material no
.43
, Suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable Diameters. 54-58 mm NIEDAX Model No:. B58 E3 Type: B58E3 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 785842

NIEDAX - Manufacturer: B 64
Hammerfoot-clamp, pressure trough in galvanized steel according to DIN EN 10346, Hammerfußbügel dip galvanized to DIN EN ISO 1461, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter trays (GW. ..) must be ordered separately are. For use in the functional integrity please follow additional rules!

Occupancy: 1 cable

for cable diameter: 58 - 64 mm

NIEDAX model no. B 64 Type: B64


Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 653176

NIEDAX - Manufacturer: B 64 AL Hammerfoot-clamp with pressure trough and screw according to DIN EN ISO
2 7, all-aluminum, suitable for NIEDAX anchor channels with 297 -298
6 -
7 mm slot width, counter sink (GW. ..) must be ordered separately. Occupancy:
Cable for cable diameter: 58 - 64 mm NIEDAX Model No.: B 64 AL Type: B64AL item: 5 ea..
Sales unit: 50 pieces
Lieske Part No.: 851215

NIEDAX - Manufacturer: B 64 E3
Hammerfoot-clamp with pressure trough, completely made of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameter: 58 - 64 mm

NIEDAX model no. B 64 E3

Type: B64E3
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 445188

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 64 - 70 mm
Sales unit: 50 pieces
Lieske Part No.: 199435

NIEDAX - Manufacturer: B 70 E3
Hammerfoot-clamp with pressure trough, completely made ​​of stainless steel, material no. 1.4301, fits 2970-2980 NIEDAX anchor rails with slot width 16-17 mm, counter sink (GW. ..) must be ordered separately.

Occupancy: 1 cable

for cable diameters 64 - 70 mm NIEDAX Model No.: B 70 E3. Type: B70E3




Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 183161

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 622790

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter tray (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 70 - 76 mm
Sales unit: 50 pieces
Lieske Part No.: 240646

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW...) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 76 - 82 mm
Sales unit: 50 pieces
Lieske Part No.: 162474

Hammer foot clamp, with strip-galvanized steel pressure tray in accordance with DIN EN 10346, hammer foot clamp hot-dip galvanized in accordance with DIN EN ISO 1461, suitable for NIEDAX anchor rails 2970-2980 with 16-17 mm slot width, counter trays (GW..) must be ordered separately. For use in functional maintenance, please observe additional regulations! Assignment: 1 cable for cable Ø: 82 - 90 mm
Sales unit: 50 pieces
Lieske Part No.: 487440

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 90 - 100 mm
Sales unit: 25 pieces
Lieske Part No.: 318810

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 100 - 110 mm
Sales unit: 25 pieces
Lieske Part No.: 318811

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA...) must be ordered separately. Assignment: 1 cable for cable Ø: 6 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 707638

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rail (2910-2920) with 11-12 mm slot width, counter trays (GWA...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 10 - 12 mm
Sales unit: 100 pieces
Lieske Part No.: 139416

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 849644

Hammer foot clamp, with pressure tray and screw according to DIN EN ISO 1207, made entirely of aluminum, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter tray (GW...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 1426331

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 10 - 14 mm
Sales unit: 100 pieces
Lieske Part No.: 320148

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 12 - 16 mm
Sales unit: 100 pieces
Lieske Part No.: 913324

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 690722

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 16 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 318817

Hammer foot clamp, with pressure tray, made entirely of stainless steel, material no. 1.4301, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 14 - 18 mm
Sales unit: 100 pieces
Lieske Part No.: 1313894

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 3 cables for cable Ø: 18 - 20 mm
Sales unit: 100 pieces
Lieske Part No.: 989462

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) must be ordered separately. Assignment: 1 cable for cable Ø: 16 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 140698

Hammer foot clamp, with strip-galvanized steel pressure tray according to DIN EN 10346, hammer foot clamp hot-dip galvanized according to DIN EN ISO 1461, suitable for NIEDAX series/anchor rails (2910-2920) with 11-12 mm slot width, counter trays (GWA/GWS...) and double trays (DW...) must be ordered separately. Allocation one above the other: 2 cables for cable Ø: 18 - 22 mm
Sales unit: 100 pieces
Lieske Part No.: 1426025