Installation Material from Niedax

Hexagon nut according to DIN EN ISO 4032, galvanized according to DIN EN ISO 4042, blue passivated. Thread: M10 Strength class: 8 Wrench size: SW 17 / SW 16
Sales unit: 100 pieces
Lieske Part No.: 409222

NIEDAX - Make: SMU 10
Hexagonal nut to DIN EN ISO 4032 and washer according to DIN EN ISO 7089, galvanized to ISO 4042, blue passivated. For use in the functional integrity please follow additional rules!

for thread: M 10 NIEDAX model no. SMU 10 Type: SMU10




Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 241122

E-clips, screw clamp with joint, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 1 - 25 mm Width W x Height H (without joint): 60 x 71 mm Distance from screw clamp inside to clamping screw C: 12 mm Side fastening holes: 2 x Ø 10 mm Joint thread connection: M 10 Load capacity F: 2 kN Material: Steel, mechanically galvanized/passivated in accordance with DIN EN ISO 9227
Sales unit: 10 pieces
Lieske Part No.: 210728

E-clips, turnbuckle, with hook and eyelet, for tightening the rope suspension. Dimensions (approx. dimensions) Hook and eyelet thread: M 6 Eyelet diameter: 10 mm Clamping range A: 155 - 245 mm Material: Stainless steel, material no. 1.4401, 1.4404
Sales unit: 10 pieces
Lieske Part No.: 537594

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 15 - 33 mm Width B: 60 mm for threaded rod through hole: Ø 14 mm Load capacity F: 1.1 kN Material: Steel, rustproof, material no. 1.4401
Sales unit: 25 pieces
Lieske Part No.: 204998

Steigetrassenbefestigungsadapter für die Decken- und Bodenbefestigung von Steigetrassen (STL 60. ... und STM 60. ...) inkl. Zubehör (FLM 8X16 F). Zur Verwendung bei vertikalen Kabelführungen im integrierten Funktionserhalt. Für den Aussenbereich empfiehlt sich die Edelstahlvarianten. Die Steigetrassen werden mittels der Steigetrassenbefestigungsadapter in 'Fest- bzw. Loslageranordnung' installiert. Beachtet werden muss die brandschutztechnische Beurteilung der Fa. Niedax. Durchsteckanker DAZ... zur Boden- / Deckenbefestigung müssen gesondert bestellt werden. Abstand zwischen Decke und Boden : = 3,5 m für Steigetrassen : STL 60. ... F / STM 60. ... F Max. Nennbreite bei : Steigetrassen STL 60. ... B = 400 mm Steigetrassen STM 60. ... B = 600 mm Abmessungen (ca. Maße) H x B x L : 91 x 152 x 70 mm Materialstärke t : 3 mm Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 832944

Beam clamp, pre-assembled, for mounting on beam flanges in accordance with DIN 1025 with a minimum dimension of 8 - 20 mm and a max. 14% inclination or parallel flanges with a flange thickness of 8 - 20 mm, for vertical suspensions using a threaded rod, pre-assembly of the beam clamp with the threaded rod before assembly is possible. The beam clamp may only be loaded perpendicular to the beam! for threaded rod: = M 8 Dimensions (approx. dimensions) Height H: 61 mm Width B: 17.5 mm Length L: 112 mm Beam flange thickness t: 8 - 20 mm Vertical nominal load F: 2.0 kN Material: Steel, strip galvanized in accordance with DIN EN 10346 Niedax model no.: TKM 1
Sales unit: 25 pieces
Lieske Part No.: 1327253

Beam clamp, pre-assembled, for mounting on beam flanges in accordance with DIN 1025 with a minimum dimension of 8 - 20 mm and a max. 14% inclination or parallel flanges with a flange thickness of 8 - 20 mm, for vertical suspensions using a threaded rod, pre-assembly of the beam clamp with the threaded rod before assembly is possible. The beam clamp may only be loaded perpendicular to the beam! for threaded rod: = M 10 Dimensions (approx. dimensions) Height H: 61 mm Width B: 19.5 mm Length L: 112 mm Beam flange thickness t: 8 - 20 mm Vertical nominal load F: 3.6 kN Material: Steel, strip galvanized in accordance with DIN EN 10346 Niedax model no.: TKM 2
Sales unit: 25 pieces
Lieske Part No.: 1327251

Beam clamp, pre-assembled, for mounting on beam flanges in accordance with DIN 1025 with a minimum dimension of 8 - 20 mm and a max. 14% inclination or parallel flanges with a flange thickness of 8 - 20 mm, for vertical suspensions using a threaded rod, pre-assembly of the beam clamp with the threaded rod before assembly is possible. The beam clamp may only be loaded perpendicular to the beam! for threaded rod: = M 12 Dimensions (approx. dimensions) Height H: 61 mm Width B: 21.5 mm Length L: 112 mm Beam flange thickness t: 8 - 20 mm Vertical nominal load F: 5 kN Material: Steel, strip galvanized in accordance with DIN EN 10346 Niedax model no.: TKM 3
Sales unit: 25 pieces
Lieske Part No.: 1327252

Beam intermediate clamps, including hexagon screws with shoulder tip in accordance with DIN 564, for clamping the rail between the legs of a T-beam. The specified load capacity refers to a leg spacing of 400 mm and an applied torque of 2.5 Nm with exclusively vertical load introduction. If larger leg spacings are used, the max. load capacity must be reduced. Please order the rail separately (the length corresponds to the distance between the two flanges) and cut to length on site (minus approx. 16 mm material thickness and screw tip), mount with the two beam intermediate clamps and then position and clamp in the beam. for anchor rail: 2986 2996Z Accessories: 4 x SK 8X25 V Dimensions (approx. dimensions) H x W x L: 15 x 45.5 x 100 mm Material thickness t: 2 mm Load capacity F: 0.5 kN Leg spacing/2 Material intermediate clamp: Steel, strip galvanized according to DIN EN 10346 Material hexagon screw: Steel, electrogalvanized according to DIN EN ISO 4042, blue passivated Niedax model no.: TZK 86-96 S
Lieske Part No.: 273110

Body washer according to DIN EN ISO 7093-1, for covering larger mounting holes, for screws with M 12 thread. Dimensions (approx. dimensions) Inner Ø: 13 mm Outer Ø B: 37 mm Thickness t: 3 mm Material: Stainless steel, material no. 1.4301, 1.4303
Sales unit: 100 pieces
Lieske Part No.: 564593

Body washer according to DIN EN ISO 7093-1, for covering larger mounting holes, for screws with M 12 thread. Dimensions (approx. dimensions) Inner Ø: 13 mm Outer Ø B: 37 mm Thickness t: 3 mm Material: Steel, galvanized according to DIN EN ISO 4042/2081, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 564598

Body washer according to DIN EN ISO 7093-1, for covering larger mounting holes, for screws with M 6 thread. Dimensions (approx. dimensions) Inner Ø: 6.4 mm Outer Ø B: 18 mm Thickness t: 1.6 mm Material: Stainless steel, material no. 1.4301, 1.4303
Sales unit: 100 pieces
Lieske Part No.: 375131

Body washer according to DIN EN ISO 7093-1, for covering larger mounting holes, for screws with M 8 thread. Dimensions (approx. dimensions) Inner Ø: 8.4 mm Outer Ø B: 24 mm Thickness t: 2 mm Material: Steel, hot-dip galvanized according to DIN EN ISO 1461
Sales unit: 100 pieces
Lieske Part No.: 163112

NIEDAX - Make: U.S. M10
washer, steel according to DIN EN ISO 7089, DIN 50961 zinc plated, blue passivated, for screws with thread M 10 NIEDAX Model No.: U.S. M10. Type: USM10




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 137426

Washer according to DIN EN ISO 7089, for screws with thread M 12. Dimensions (approx. dimensions) Inner Ø: 13 mm Outer Ø: 24 mm Thickness t: 2.5 mm Material: Steel, galvanized according to DIN EN ISO 2081, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 369778

Washer according to DIN EN ISO 7089, for screws with thread M 5. Dimensions (approx. dimensions) Inner Ø: 5.3 mm Outer Ø: 10 mm Thickness t: 1 mm Material: Steel, galvanized according to DIN EN ISO 2081, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 504240

Washer according to DIN EN ISO 7089, for screws with thread M 6. Dimensions (approx. dimensions) Inner Ø: 6.4 mm Outer Ø: 12.5 mm Thickness t: 1.6 mm Material: Steel, galvanized according to DIN EN ISO 2081, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 234020

NIEDAX - Make: U.S. M8
washer, steel according to DIN EN ISO 7089, DIN 50961 zinc plated, blue passivated, for screws with thread M 8 NIEDAX Model No.: U.S. M8. Type: USM8




Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 245423

Weitspannträgerklemme, zur Klemmbefestigung von Kabelrinnen, Kabel- und Steigeleitern, Weitspannkabelrinnen und -leitern an waagerecht kreuzenden Tägern, eine versetzt angeordnete Anordnung der Klemme verhindert eine Bewegung in Längsrichtung während der Montage, zwei Kerbstellen am Klemmschenkel ermöglichen eine Anpassung des Schenkels an kürzere Trägerflansche, einschließlich galvanisch verzinktes Befestigungszubehör für Kabelrinnen 2 FLM 6X12 V sowie feuerverzinktes Befestigungszubehör für Kabel- und Steigeleitern und Weitspannkabelrinnen /-leitern 2 FLM 8X13 F. Verwendung für : Kabelrinnen RL ... / RLU ... RLV ... RLCI ... RS .... / RSU ... RLC ... / RLUC ... RLCPV ... Verwendung für : Kabel- und Steigeleitern KSL ... Verwendung für : Weitspannkabelrinnen WRL ... WRLM ... WRU ... Verwendung für : Weitspannkabelleitern WSLM ... WSLS ... Abmessungen (ca. Maße) Höhe H x Breite B x Materialstärke t : 82 x 150 x 2 mm Flanschstärke des Trägers t : 8 - 22 mm Werkstoff : Stahl, bandverzinkt nach DIN EN 10346
Sales unit: 20 pieces
Lieske Part No.: 691755

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 10 - 21 mm Width B: 47 mm for threaded rod through hole: Ø 14 mm Load capacity F: 1.1 kN Material: steel, hot-dip galvanized
Sales unit: 100 pieces
Lieske Part No.: 1315697

E-clips, screw clamp, for screwing onto a wide range of support flanges. Dimensions (approx. dimensions) for flange thickness T: 32 - 47 mm Width B: 70 mm for threaded rod through hole: Ø 14 mm Load capacity F: 1.1 kN Material: steel, hot-dip galvanized
Sales unit: 25 pieces
Lieske Part No.: 144911

Cylinder head screw according to DIN EN ISO 1207, with slot. Can be used for: In combination with GSF 0406 for fastening the WBL... insert plates of the WSLSN... and WSLS... wide span cable ladders to anchor rails 2970 and 2971. Dimensions (approx. dimensions) Length L: 10 mm Thread: M 6 Strength class: 4.8 Material: Steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 402542

Cylinder head screw according to DIN EN ISO 1207, with slot. Dimensions (approx. dimensions) Length L: 16 mm Thread: M 6 Strength class: 4.8 Material: Steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 653110

Toothed washer. Inner Ø: 8.4 mm for thread: M 8 Material: steel, galvanized according to DIN EN ISO 4042, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 537633