Installation Material from Niedax

NIEDAX - Make: GSF 0405
Schräggleitmutter with spring (phosphated), for fixing of cable trays on C-anchor rails model 2970 and 2971 according to DIN EN 60715 with slot width 16 mm, GSF ... used at any point in the profile, galvanized according to DIN 50961, passivated.

Dimensions L x W: 26 x 15.5 mm

Height of the sliding nut: 4mm

with thread M 5

Total height: 14 mm

NIEDAX model no. GSF 0405

Type: GSF0405
Item: 100 ST.
Sales unit: 25 pieces
Lieske Part No.: 247075

NIEDAX - Make: GSF 4 6 Schräggleitmutter with spring (phosphated), for fixing of cable trays on C-anchor rails model 297 and 297
according to DIN EN 6 7
5 with slot width
6 mm, as well as for attaching skimmers WBL ... the wide span cable ladders on rail extrusion according to DIN EN 297 6 7
5 with slot width
6 mm, GSF ... used at any point in the profile, galvanized to DIN 5 96
, passivated. Dimensions L x W: 26 x
5.5 mm height of the sliding nut 4 mm with thread M 6 Total height:
4 mm NIEDAX model no. GSF 4 6 Type: GSF 4 6 item:
ST.
Lieske Part No.: 811572

NIEDAX - Make: GSF 0408
Schräggleitmutter with spring (phosphated), for fixing of cable trays on C-anchor rails model 2970 and 2971 according to DIN EN 60715 with slot width 16 mm, GSF ... . applicable at any point in the profile, galvanized according to DIN 50961, passivated Dimensions L x W: 26 x 15.5 mm height of the sliding nut 4 mm with thread M 8 Overall Height: 14 mm NIEDAX model no. GSF 0408 Type : GSF0408












Quantity: 1 unit.
Sales unit: 25 pieces
Lieske Part No.: 556373

Inclined sliding nut, for fastening to C-anchor rail model 2920 with slot width 11 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L x W: 20 x 10.5 mm with thread: M 5 Height of the sliding nut: 4 mm
Sales unit: 100 pieces
Lieske Part No.: 744268

Inclined sliding nut, for fastening to C-anchor rail model 2920 with slot width 11 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L x W: 20 x 10.5 mm Height of the sliding nut: 4 mm with thread: M 6
Sales unit: 100 pieces
Lieske Part No.: 318849

Inclined sliding nut, for fastening to C-anchor rails model 2970, 2971 and 2972 with slot width 16 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 26 x 15.5 mm Height of the sliding nut: 3 mm with thread: M 4
Sales unit: 50 pieces
Lieske Part No.: 104800

Inclined sliding nut, for fastening to C-anchor rails model 2970, 2971 and 2972 with slot width 16 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 26 x 15.5 mm Height of the sliding nut: 3 mm with thread: M 5
Sales unit: 50 pieces
Lieske Part No.: 469975

Inclined sliding nut, for fastening to C-anchor rails model 2970, 2971 and 2972 with slot width 16 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 26 x 15.5 mm Height of the sliding nut: 4 mm with thread: M 6
Sales unit: 50 pieces
Lieske Part No.: 724312

Inclined sliding nut, for fastening to C-anchor rails model 2970, 2971 and 2972 with slot width 16 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 26 x 15.5 mm Height of the sliding nut: 4 mm with thread: M 8
Sales unit: 50 pieces
Lieske Part No.: 366769

Inclined sliding nut, without cylinder head screw, for fastening in C-series rail with 11 mm slot width, GSM... can be used at any point in the profile. for series rail: 2910 Dimensions (approx. dimensions) W x tx L: 9.4 x 1.75 x 18 mm Thread: M 4 Material: Steel, galvanized according to DIN EN ISO 2081, blue passivated
Sales unit: 100 pieces
Lieske Part No.: 148059

Inclined sliding nut, for fastening to C-series rail model 2910 with slot width 11 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L (inclined) x W: 16 x 10 mm with thread: M 4 Height of the sliding nut: 3 mm
Sales unit: 100 pieces
Lieske Part No.: 496017

Inclined sliding nut, for fastening to C-series rail model 2910 with slot width 11 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L (inclined) x W: 16 x 10 mm with thread: M 5 Height of the sliding nut: 3 mm
Sales unit: 100 pieces
Lieske Part No.: 307083

Inclined sliding nut, for fastening to C-series rail model 2913 and C-anchor rail 2914 with slot width 11 mm and C-anchor rails model 2916 and 2917 with slot width 12 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L (inclined) x W: 20 x 13 mm with thread: M 4 Height of the sliding nut: 2.5 mm
Sales unit: 500 pieces
Lieske Part No.: 385792

Inclined sliding nut, for fastening to C-series rail model 2913 and C-anchor rail model 2914 with slot width 11 mm and C-anchor rails model 2916 and model 2917 with slot width 12 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L (inclined) x W: 20 x 13 mm with thread: M 5 Height of the sliding nut: 4 mm
Sales unit: 100 pieces
Lieske Part No.: 801450

NIEDAX - Make: GSM 306
Schräggleitmutter, for mounting on DIN rail series Model 2913 and Model 2914 C-anchor rail with slot width 11 mm and C-anchor rails model 2916 and model 2917 with a slot width of 12 mm, GSM ... . applicable at any point in the profile, galvanized according to DIN 50961, blue passivated Dimension L (tilted) xB: 20 x 13 mm with thread: M6 slide nut height: 4 mm NIEDAX model no. 306 GSM Type: GSM306










Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 156595

Inclined sliding nut, for fastening to C-series rail model 2913 and C-anchor rail model 2914 with slot width 11 mm and C-anchor rails model 2916 and model 2917 with slot width 12 mm, GSM... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, blue passivated. Dimensions (approx. dimensions) L (inclined) x W: 20 x 13 mm with thread: M 8 Height of the sliding nut: 4 mm
Sales unit: 50 pieces
Lieske Part No.: 572303

Inclined sliding nut, without cylinder head screw, for C-anchor rails, can be used at any point with a fastening screw in the profile. For anchor rails/profile rails: 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Length L: 31 mm Width B: 15.5 mm Height H: 4 mm Thread: M 6 Material: Steel, galvanized according to DIN EN ISO 2081/4042, thick-layer passivated
Sales unit: 50 pieces
Lieske Part No.: 176305

NIEDAX - Make: GSM 406 E3
Schräggleitmutter, for C-rail anchor E3 2970 model with a slot width of 16 mm, GSM ... E3 at each point in the profile can be used with screw in stainless steel, material no. 1.4301.

Dimensions L x W: 31 x 15.5 mm

Height of the sliding nut: 4mm

with thread M 6

NIEDAX model no. GSM 406 E3

Type: GSM406E3
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 308894

Inclined sliding nut, without cylinder head screw, for C-anchor rails in E5, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails in E5: 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Length L: 31 mm Width B: 15.5 mm Height H: 4 mm Thread: M 6 Material: Stainless steel, material no. 1.4571
Sales unit: 50 pieces
Lieske Part No.: 1313651

NIEDAX - Make: GSM 408
Schräggleitmutter, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with a slot width of 16 mm, GSM ... used at any point in the profile with fixing screw, galvanized according to DIN 50961, passivated.

Dimensions L x W: 31 x 15.5 mm

Height of the sliding nut: 6mm

with thread M 8

NIEDAX model no. 408 GSM

Type: GSM408
Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 171381

Inclined sliding nut, without cylinder head screw, for C-anchor rails in E3, can be used at any point with a fastening screw in the profile. for anchor rails/profile rails in E3: 2970, 2971, 2972, 2975 and 2980 with 16 mm slot width Dimensions (approx. dimensions) Length L: 31 mm Width B: 15.5 mm Height H: 4 mm Thread: M 8 Material: Stainless steel, material no. 1.4301/1.4303
Sales unit: 50 pieces
Lieske Part No.: 410527

NIEDAX - Make: GSM 410
Schräggleitmutter, for C-anchor rails model 2970, 2971, 2972, 2975 and 2980 with a slot width of 16 mm, GSM ... used at any point in the profile with fixing screw, galvanized according to DIN 50961, blue passivated.

Dimensions L x W: 31 x 15.5 mm

Height of the sliding nut: 6mm

with thread M 10 NIEDAX model no. 410 GSM Type: GSM410




Item: 100 ST.
Sales unit: 50 pieces
Lieske Part No.: 348135

NIEDAX - Make: GSM 4
E3 Schräggleitmutter, for C-rail anchor 297 E3 model with slot width
6 mm, GSM ... E3 at each point in the profile can be used with screw in stainless steel, material no.
.43
. Dimensions L x W: 3
x
5.5 mm height of the sliding nut 4 mm with thread M
NIEDAX model no. 4 GSM
E3 Type: GSM4
E3 item:
ST.
Sales unit: 50 pieces
Lieske Part No.: 908317

U-sliding nut, for C-anchor channels model 2970 and 2971, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 24.5 x 19 mm Height of the sliding nut: 10 mm with thread: M 6
Sales unit: 50 pieces
Lieske Part No.: 180082

U-sliding nut, for C-series rail model 2910, U-sliding nut can only be used from the profile end, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 17 x 13 mm Height of the sliding nut: 4.5 mm with thread: M 4
Sales unit: 100 pieces
Lieske Part No.: 675516

U-sliding nut, for C-series rail model 2913 and C-anchor rail model 2914, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 21.5 x 13 mm Height of the sliding nut: 6.5 mm with thread: M 5
Sales unit: 100 pieces
Lieske Part No.: 926913

U-sliding nut, for C-anchor channels model 2975 and 2980, U-sliding nut can only be used from the end of the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 28.9 x 20 mm Height of the sliding nut: 10 mm with thread: M 6
Sales unit: 50 pieces
Lieske Part No.: 1426323

U-sliding nut, special design, for fastening to C-anchor rails model 2975 and 2980 with slot width 16 mm, GUE... can be used at any point in the profile, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 26.5 x 19 mm Height of the sliding nut: 10 mm with thread: M 6
Sales unit: 50 pieces
Lieske Part No.: 1426300

NIEDAX - Make: GUF 204
. slide nut, with plastic spring clamp for C-series rail model 2910, slide nut is only from profile end use, self-adhesive, captive, galvanized according to DIN 50961, passivated Dimensions L x W: 16 x 14 mm with thread M 4 NIEDAX model no. GUF 204 Type: GUF204








Quantity: 1 unit.
Lieske Part No.: 655570

Sliding nut, with plastic clamping spring, for C-series rail model 2910, sliding nut can only be used from the end of the profile, self-adhesive, captive, galvanized according to DIN EN ISO 2081, thick-layer passivated. Dimensions (approx. dimensions) L x W: 16 x 14 mm with thread: M 5
Lieske Part No.: 744269

Counter trough, for hammer foot clamp, self-adhesive on C-profile rails using a clamping spring, halogen-free. for clamp: B ... BK ... for C-profile rails with slot width: 16 - 17 mm Dimensions (approx. dimensions) for cable Ø: 90 - 100 mm Length L: 45 mm Operating temperature range: -40° to 80°C Color: light gray RAL: 7035 (similar) Material: Polyethylene (PE) silicone-free (free of paint-wetted substances)
Sales unit: 25 pieces
Lieske Part No.: 193743

Counter trough, for hammer foot clamp, self-adhesive on C-profile rails using a clamping spring, halogen-free. for clamp: B ... BK ... for C-profile rails with slot width: 16 - 17 mm Dimensions (approx. dimensions) for cable Ø: 100 - 110 mm Length L: 45 mm Operating temperature range: -40° to 80°C Color: light gray RAL: 7035 (similar) Material: Polyethylene (PE) silicone-free (free of paint-wetted substances)
Lieske Part No.: 402923

NIEDAX - Make: GW 12
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameter 6 - 12 mm

Length: 40 mm

NIEDAX model no. GW 12

Type: GW12
Quantity: 1 unit.
Lieske Part No.: 175649

NIEDAX - Make: GW
4 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameter:
-
4 mm Length: 4 mm NIEDAX model no. GW
4 Type: GW
4 item:
ST.
Lieske Part No.: 917308

NIEDAX - Make: GW
6 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameter:
2 -
6 mm Length: 4 mm NIEDAX model no. GW
Type 6: GW
6 item:
ST.
Lieske Part No.: 999591

NIEDAX - Make: GW 18
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameter: 14 - 18 mm

Length: 40 mm

NIEDAX model no. GW 18 Type: GW18


Quantity: 1 unit.
Lieske Part No.: 295296

NIEDAX - Make: GW 22 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameter:
8 - 22 mm Length: 4 mm NIEDAX Model No.: 22 Vehicle type: GW22 item.
ST.
Lieske Part No.: 789934

NIEDAX - Make: GW 26 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameters 22 - 26 mm Length: 4 mm NIEDAX Model No.: 26 Vehicle type: GW26 item.
ST.
Lieske Part No.: 107715

NIEDAX - Make: GW 3 Counter Basin, for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameter: 26 - 3 mm Length: 4 mm NIEDAX Model No.: GW Type 3: Limit 3 per item.
ST.
Lieske Part No.: 909897

NIEDAX - Make: GW 34
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

Diameters for cable 30-34 mm

Length: 40 mm

NIEDAX model no 34 GW Type: GW34


Quantity: 1 unit.
Lieske Part No.: 686781

NIEDAX - Make: GW 38
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameter: 34 - 38 mm

Length: 40 mm

NIEDAX model no. GW 38

Type: gw38
Quantity: 1 unit.
Lieske Part No.: 486781

NIEDAX - Make: GW 42 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameters 38 - 42 mm Length: 4 mm NIEDAX Model No.: 42 Vehicle type: GW42 item.
ST.
Lieske Part No.: 539857

NIEDAX - Make: GW 46
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameter: 42 - 46 mm

Length: 40 mm

NIEDAX model no. GW 46

Type: GW46
Quantity: 1 unit.
Lieske Part No.: 647314

NIEDAX - Make: GW 50
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameters 46 - 50 mm

Length: 40 mm

NIEDAX model no. GW 50

Type: GW50
Quantity: 1 unit.
Lieske Part No.: 682383

NIEDAX - Make: GW 54 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameter: 5-54 mm Length:. NIEDAX 45 mm Model No.: 54 Vehicle type: GW54 item:
ST.
Lieske Part No.: 792362

NIEDAX - Make: GW 58
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameter: 54 - 58 mm

Length: 45 mm

NIEDAX model no. GW 58

Type: GW58
Quantity: 1 unit.
Lieske Part No.: 275695

NIEDAX - Make: GW 64
counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring. suitable for cable diameters: 58 - 64 mm Length: 45 mm NIEDAX model No: 64 GW Type: GW64








Quantity: 1 unit.
Lieske Part No.: 566524

NIEDAX - Make: GW 70
Counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with 16 - 17 mm slot width by clamping spring.

for cable diameters 64 - 70 mm

Length: 45 mm

NIEDAX model no. GW 70

Type: GW70
Quantity: 1 unit.
Sales unit: 50 pieces
Lieske Part No.: 263188

NIEDAX - Make: GW 76 counter sink for Hammerfoot-clamp B. .., PE, halogen free, self-adhesive on C-sections with
6 -
7 mm slot width by clamping spring. for cable diameter: 7-76 mm Length: 45 mm NIEDAX Model No.: 76 Vehicle type: GW76 item.
ST.
Sales unit: 25 pieces
Lieske Part No.: 700530

Counter trough, for hammer foot clamp, self-adhesive on C-profile rails using a clamping spring, halogen-free. for clamp: B ... BK ... for C-profile rails with slot width: 16 - 17 mm Dimensions (approx. dimensions) for cable Ø: 76 - 82 mm Length L: 45 mm Operating temperature range: -40° to 80°C Color: light gray RAL: 7035 (similar) Material: Polyethylene (PE) silicone-free (free of paint-wetted substances)
Lieske Part No.: 333538