Installation Material from Niedax

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 26 mm Outer chain link dimension B: 12 mm Material thickness t: 3 mm Load-bearing capacity F: 0.45 kN Delivery length L: 30 m Material: Steel, hot-dip galvanized
Sales unit: 30 meters
Lieske Part No.: 112490

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 32 mm Outer chain link dimension B: 16 mm Material thickness t: 4 mm Load-bearing capacity F: 0.8 kN Delivery length L: 30 m Material: Steel, hot-dip galvanized
Sales unit: 30 meters
Lieske Part No.: 364460

Link chain, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 32 mm Outer chain link dimension B: 16 mm Material thickness t: 4 mm Load-bearing capacity F: 0.8 kN Delivery length L: 30 m Material: Steel, galvanized/chromated in accordance with DIN 50021
Sales unit: 30 meters
Lieske Part No.: 614227

E-clips, T-claw with eyelet, T-claw with hole for additional securing to the ceiling profile, with central connection eyelet, for fastening to ceiling profiles, for rope and chain fastening. Dimensions (approx. dimensions) Ceiling profile width: 25 mm Eyelet: Ø 6 mm Center hole spacing to ceiling profile surface: 7 mm Claw hole: Ø 3 mm Load capacity F: 0.22 kN Material: Steel, painted Color: white
Sales unit: 100 pieces
Lieske Part No.: 460734

Screw head plate, head plate with welded connection plate and two pre-assembled connector brackets, for mounting on sloping ceilings or horizontally inclined beams, with a vertical adjustment range of max. +/- 50°, including hot-dip galvanized proportional fastening accessories. For profile: I 80/... in accordance with DIN 1025 Dimensions (approx. dimensions) Head plate L x W x t: 200 x 80 x 6 mm Fastening hole: 13 x 28 mm center distance: 152 mm Connector bracket hole: ¿ 11 mm center distance: 100 mm Total length L: 261 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 675790

Link chain, according to DIN 763, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 22 mm Outer chain link dimension B: 8 mm Material thickness t: 2 mm Load-bearing capacity F: 0.5 kN Delivery length L: 50 m Material: Stainless steel, material no. 1.4401, 1.4404
Sales unit: 50 meters
Lieske Part No.: 577743

Link chain, according to DIN 763, for suspensions. The load-bearing capacity information only applies if the chain is sufficiently anchored to the supporting surface. Dimensions (approx. dimensions) Inner chain link dimension H: 26 mm Outer chain link dimension B: 12 mm Material thickness t: 3 mm Load-bearing capacity F: 1.2 kN Delivery length L: 50 m Material: Stainless steel, material no. 1.4401, 1.4404
Sales unit: 50 meters
Lieske Part No.: 1315972

Screw head plate, head plate with welded C-profile with continuous holes on both sides, for mounting on horizontal ceilings, including hot-dip galvanized fastening accessories. Please observe additional regulations for use in functional maintenance! Use for: Profile U 6040/... Anchor rail/profile rail 2996Z/... Dimensions (approx. dimensions) Head plate L x W x D: 200 x 80 x 6 mm Fastening holes: 13 x 28 mm Center distance: 152 mm Two-sided profile holes, single row: 13 x 25 mm Center distance: 50 mm Total length L: 106 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 146146

Kabeltragwannensystem, für die Wandmontage oder zur Befestigung an Schienen. In Anlehnung an die VDE 0298-565-1 und VDE 0298-565-2 sollte ein max. Stützabstand von 0,8 m nicht überschritten werden. Die Tragfähigkeitsangaben gelten nur bei ausreichender Verankerung mit dem tragenden Untergrund und wenn im Klemmbereich die Oberflächen der vertikal verlaufenden Profil-/Ankerschienen und der Wannentragschienen aus Stahl oder verzinktem Stahl sind. Ist der Klemmbereich mit einem Farbanstrich versehen, muss dieser entfernt werden, da sonst die Tragfähigkeit nicht gegeben bzw. gewährleistet ist. Gefahr des Abrutschens! 1. Das Kabeltragwannensystem in den Wannenbreiten 40, 50, 60, 70, 80 und 120 mm auf Anfrage als Sonderanfertigung lieferbar. Befestigungsmaterial muss, je nach Anwendungsfall, gesondert bestellt werden. Abmessungen (ca. Maße) Wanne B x L : 100 x 200 mm Anzahl der Tragwannen übereinander : 5 Abstand der Tragwannen : 100 mm Tragfähigkeit F bei B/2 : 0,5 kN Schiene H x B : 485 x 72 mm Schienenlochung : 11 x 16 mm mittiger Lochabstand : 100 mm Anzahl der Lochung : 5 Werkstoff : Stahl, tauchfeuerverzinkt nach DIN EN ISO 1461
Lieske Part No.: 509654

NIEDAX - Make: LW 16
Long trough for clamp clamp type B 16, BA 16, BU 16, BF 16 and BW 16, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 16 + BU 16

for cable diameter: 8 - 13 mm

L Length: 200 mm

NIEDAX model no. LW 16

Type: LW16
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 150979

NIEDAX - Make: LW 22 long trough for clamp clamp type B 22, BA 22, BU 22, BF 22 and BW 22, from steel strip galvanized to DIN EN
346th Additionally approved for function maintenance to DIN 4
2, part
2 /
.9
If the conditions are met for integrity and then only for the Band type B 22 + BU 22 for cable diameter:
3 -
9 mm Length L: 2 mm NIEDAX model no. LW 22 Type: LW22 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 845505

NIEDAX - Make: LW 26
long trough for clamp clamp type B 26, BA 26, BU 26, BF 26 and BW 26, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 26 + BU 26 for cable diameters 19 - 23 mm



L Length: 200 mm

NIEDAX model no. LW 26 Type: LW26


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 370240

NIEDAX - Make: LW 34
long trough for clamp clamp type B 34, BA 34, BU 34, BF 34 and BW 34, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 34 + BU 34 for cable diameters 23 - 31 mm



L Length: 200 mm

NIEDAX model no. LW 34 Type: LW34


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 635644

NIEDAX - Make: LW 38
long trough for clamp clamp type B 38, BA 38, BU 38, BF 38 and BW 38, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 38 + BU 38 for cable diameters: 31 - 36 mm



L Length: 200 mm

NIEDAX model no. LW 38 Type: lw38


Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 613556

NIEDAX - Make: LW 42
Long trough for clamp clamp type B 42, BA 42, BU 42, BF 42 and BW 42, from steel strip galvanized to DIN EN 10346th Additionally approved for function maintenance to DIN 4102, Part 12.1.91, if the boundary conditions are fulfilled for integrity and then only for the Band type B 42 + BU 42

for cable diameters 36 - 40 mm

L Length: 200 mm

NIEDAX model no. LW 42

Type: LW42
Quantity: 1 unit.
Sales unit: 100 pieces
Lieske Part No.: 564796

Long tray, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter tray BU ... without counter tray for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 39 - 43 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 100 pieces
Lieske Part No.: 545417

NIEDAX - Make: LW 5 long trough for clamp clamp type B 5, 5 BA, BU 5, 5 BF and BW 5, from steel strip galvanized to DIN EN
346th Additionally approved for function maintenance to DIN 4
2, part
2 /
.9
If the conditions are met for integrity and then only for the Band type B 5 + BU 5th for cable diameters 43 - 47 mm Length L: 2 mm NIEDAX Model No.: LW 5 Type: LW5 item.
ST.
Sales unit: 50 pieces
Lieske Part No.: 882897

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 47 - 51 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 893472

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 51 - 55 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 557701

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 55 - 61 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 678117

Long trough, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter trough BU ... without counter trough for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 61 - 67 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 212985

Long tray, for all U-clamps, to increase the contact surface. For use in functional maintenance, please observe additional regulations! for U-clamp: B ... BA ... BU ... BF ... BW ... in functional maintenance approved for: B ... without counter tray BU ... without counter tray for C-profile rails with slot width: 11 - 12 mm 16 - 17 mm 18 - 22 mm for flat iron with material thickness t: 4 - 12 mm for angle steel, U-iron with a leg length: 40 mm and t= 4 - 6 mm Dimensions (approx. dimensions) for cable Ø: 67 - 73 mm Length L: 200 mm Material: Steel, strip galvanized in accordance with DIN EN 10346
Sales unit: 50 pieces
Lieske Part No.: 599983

Machine installation pipe for the cable protection pipe system. Dimensions (approx. dimensions) Pipe Ø: 30 mm Material thickness t: 1.5 mm Delivery length L: 6000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO 1461
Sales unit: 6 meters
Lieske Part No.: 882710

Machine installation pipe for the cable protection pipe system. Dimensions (approx. dimensions) Pipe Ø: 60 mm Material thickness t: 2 mm Delivery length L: 6000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO 1461
Sales unit: 6 meters
Lieske Part No.: 315626

Pole connection holder, with coupling, for crossing fastening of cable protection pipes to the poles of cable trays and cable ladders. Can be used for: Machine installation pipe MI 30... on cable trays RL..., RS... etc. and cable ladders KL... Dimensions (approx. dimensions) for pole clamp width B: = 15 mm Clamp length: 120 mm Coupling Ø: 30 mm Coupling length: 80 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 317845

Beam connection holder, with round steel bracket, for crossing fastening of cable protection pipes to beams of cable trays and cable ladders. Can be used for: Machine installation pipe MI 30... on cable trays RL..., RS... etc. and cable ladders KL... Dimensions (approx. dimensions) for beam clamp width B: = 15 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125531

Stile connection holder, with round steel bracket, for crossing fastening of cable protection pipes to stiles of wide-span cable trays and wide-span cable ladders. Can be used for: Machine installation pipe MI 30... on wide-span cable trays WRL..., WRLM... and wide-span cable ladders WSL..., WSLM... Dimensions (approx. dimensions) for stile clamp width B: = 30 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125529

Pole connection holder, with round steel bracket, for crossing fastening of cable protection pipes to the poles of the Allround cable ladders. Can be used for: Machine installation pipe MI 30... on Allround cable ladders KRC... / KRO... Dimensions (approx. dimensions) for cable ladder poles H x W: 60 x 20 mm Clamp length: 120 mm Round steel bracket Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 593760

Stile connection holder, with round steel bracket, for crossing fastening of cable protection pipes to stiles of wide-span cable trays and wide-span cable ladders. Can be used for: machine installation pipe MI 60..., machine installation pipe MIG 60... and installation pipe connection MIA 60... on wide-span cable trays WRL..., WRLM... and wide-span cable ladders WSL..., WSLM... Dimensions (approx. dimensions) for stile clamp width B: = 30 mm Clamp length: 120 mm Round steel bracket Ø: 60 mm Material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Lieske Part No.: 125489

Coupling for connecting machine installation pipes aligned lengthwise, for connecting pipe bends and for fastening to the floor connection. Can be used for: Machine installation pipe MI 30... Dimensions (approx. dimensions) Coupling Ø: 30 mm Coupling length: 80 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 835956

Coupling for connecting machine installation pipes aligned lengthwise, for connecting pipe bends and for fastening to the floor connection. Can be used for: machine installation pipe MI 60..., machine installation pipe MIG 60... and installation pipe connection MIA 60... Dimensions (approx. dimensions) Coupling Ø: 60 mm Coupling length: 115 mm Material: steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 317959

Pipe clamp, double-lobed, with mounting holes, for fastening machine installation pipes. Can be used for: Machine installation pipe MI 30... Dimensions (approx. dimensions) Height H x Width W x Length L: 29.5 x 25 x 85 mm Mounting holes: 8.5 x 10 mm Center distance: 60 mm for pipe Ø: 30 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 125494

Pipe clamp, double-lobed, with mounting holes, for fastening machine installation pipes. Can be used for: Machine installation pipe MI 60... Machine installation pipe MIG 60... Installation pipe connection MIA 60... Dimensions (approx. dimensions) Height H x Width W x Length L: 61 x 30 x 160 mm Mounting holes: 9.5 x 20 mm Center distance: 120 mm for pipe Ø: 60 mm Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
Sales unit: 20 pieces
Lieske Part No.: 723807

Heavy-duty steel dowel, with fixed threaded rod, including hexagon nut according to DIN EN ISO 4032 and washer according to DIN EN ISO 7089. The steel dowel has not been tested by the building authorities and can therefore only be used for minor fastenings! Dimensions (approx. dimensions) for thread: M 8 Nominal drilling diameter: 14 mm Dowel length L: 60 mm Total length L: 100 mm Material: Steel, galvanized according to DIN EN ISO 2081, blue passivated
Sales unit: 50 pieces
Lieske Part No.: 1315752

Nail anchor. Anchor for use in concrete for multiple fastening. The nail anchor is placed in a drill hole and spread by applying the load. The nail anchor is suitable for push-through installation. To be installed by lightly hammering the nail head. Permissible loads for centric tension, transverse load and diagonal tension at any angle as well as anchor characteristics and component dimensions for concrete strength classes = B 25 or C 20/25 and = B 55 or C 50/60. The entire approval notice no. ETA-18/0541 must be observed when dimensioning! For outdoor areas we recommend nail anchors made of stainless steel! For use in functional maintenance or for suspended ceilings with fire protection requirements (model pipe system guideline MLAR 2/2015) please observe additional regulations! Area of application The anchor can be used as a multiple fastening for anchoring light ceiling coverings and suspended ceilings in accordance with DIN 18168, as well as for statically comparable anchoring up to 1 kN/m² - also in the tension zone generated by load stresses. Technical details Total length L: 65 mm Nominal bore diameter: 6 mm Clamping range t fix: = 30 mm Material: Steel, galvanized in accordance with DIN EN ISO 2081/4042, blue passivated Approval no.: ETA-18/0541 DoP NI001
Sales unit: 100 pieces
Lieske Part No.: 265452

NIEDAX - Make: NA 6X5 nail anchor made ​​of steel, galvanized to DIN 5 96
, passivated. For use in the functional integrity please follow additional rules!Permissible loads for train-centric, cross and shear loading at any angle and anchor characteristics and dimensions for concrete strength> = 25 B and C, 2/25 When assessing the entire certification No. is: ETA 6 /
75 to note! For outdoor use, we recommend anchor made of stainless steel!Dimensions: Permissible load of single anchors:
, 6 kN Permissible bending moment M: 4 Nm max. Torque when attaching the fixture with torques = t M (D) - Nm nominal drill hole diameter d () = 6 mm cutting diameter <= 6,4 mm hole in the subsequent component d (f) <= 7 mm minimum hole depth h ( )> = 4 mm minimum anchoring depth h (v)> = 3 mm spacing between outer anchors of adjoining groups or between single anchors az> = 2 mm spacing of the outer anchors the component edge ar> =:
mm minimum thickness d (a) = 8 mm total length l = 4 mm fixture thickness t fix <= 5 mm Certificate No.:. ETA 6 /
75 Scope: The anchor may as multiple fixing for the anchorage for suspended ceilings and suspended ceilings according to DIN
8
68, as well as for static anchors similar to
kN / mý - used - even in the tension zone generated from load voltages. For outdoor use, we recommend anchor made &#8203;&#8203;of stainless steel. NIEDAX model no. 6x5 NA Type: NA6x5 item:
ST.
Sales unit: 100 pieces
Lieske Part No.: 537737

Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn. Bewertung: Zulassungs.Nr. ETA-19/0553. Zur Verwendung im Funktionserhalt bitte Zusatzvorschriften beachten! Gew.-Aussen-Ø : 10 mm Länge : 100 mm Gewindelänge : 93 mm Torxantrieb : T40 Kopf-Ø : 22,5 mm Empf. Anzugsmoment : 9,5 Nm Bohrungs-Ø Nadelholz : 6,0 mm Bohrungs-Ø Buche, Eiche, Esche : 7,0 mm Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert
Sales unit: 50 pieces
Lieske Part No.: 705776

Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn. Bewertung: Zulassungs.Nr. ETA-19/0553. Zur Verwendung im Funktionserhalt bitte Zusatzvorschriften beachten! Gew.-Aussen-Ø : 10 mm Länge : 140 mm Gewindelänge : 84 mm Torxantrieb : T40 Kopf-Ø : 22,5 mm Empf. Anzugsmoment : 9,5 Nm Bohrungs-Ø Nadelholz : 6,0 mm Bohrungs-Ø Buche, Eiche, Esche : 7,0 mm Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert
Sales unit: 50 pieces
Lieske Part No.: 705777

Holzschraube, mit Tellerkopf und Torxantrieb. Zur Befestigung von Niedax Kabeltragsystemen mit integriertem Funktionserhalt an tragenden Holzbauteilen nach DIN EN 1995-1-2. Europäische techn. Bewertung: Zulassungs.Nr. ETA-19/0553. Zur Verwendung im Funktionserhalt bitte Zusatzvorschriften beachten! Gew.-Aussen-Ø : 6 mm Länge : 60 mm Gewindelänge : 56 mm Torxantrieb : T30 Kopf-Ø : 14 mm Empf. Anzugsmoment : 9,5 Nm Bohrungs-Ø Nadelholz : 4,0 mm Bohrungs-Ø Buche, Eiche, Esche : 4,0 mm Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert
Sales unit: 100 pieces
Lieske Part No.: 705772

Schraubanker mit Flachrundkopf und Torxantrieb T30. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR 2/2015) bitte Zusatzvorschriften beachten! Anwendung : Anzahl und Anordnung der Schraubanker sind der Ausführungsplanung bzw. dem statischen Nachweis zu entnehmen und einzuhalten. Einbau und Montage gemäß Europäisch Technischer Bewertung ETA-15/0784 bzw. Montageanleitung im gerissenen und ungerissenen Beton C20/25 bis C50/60. Bei der Bemessung ist der gesamte Zulassungsbescheid ETA-15/0784 zu beachten. Zur Verwendung in Mauerwerk gemäß Europäisch Technischer Bewertung ETA-20/0132. Für Kalksandstein KS, Kalksandlochstein KSL und Vollziegel MZ liegt ein Brandschutzgutachten für den Funktionserhalt vor. Verwendung in trockenen Innenräumen. Setzen des Schraubankers mit Tangential Schlagschrauber oder von Hand. Verwendung für : Sammelhalter SHS... Technische Angaben Ø : 6 mm Länge L : 35 mm Kopf-Ø : 11 mm Bohrnenn-Ø : 5 mm Klemmbereich t fix : 1 mm empfohlenes Drehmoment : 10 Nm Torxantrieb : T30 Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert Zulassungs-Nr. : ETA-15/0784
Sales unit: 100 pieces
Lieske Part No.: 691746

Screw anchor with flat round head and Torx drive T30. For use in functional maintenance or for suspended ceilings with fire protection requirements (model pipe system guideline MLAR 2/2015), please observe additional regulations! Application: The number and arrangement of the screw anchors can be found in the implementation plan or the static proof and must be observed. Installation and assembly in accordance with European Technical Assessment ETA-15/0784 or assembly instructions in cracked and non-cracked concrete C20/25 to C50/60. The entire approval notice ETA-15/0784 must be observed when dimensioning. For use in masonry, see general type approval Z-21.1-2103. A fire protection report for functional maintenance is available for KS sand-lime brick, KSL perforated sand-lime brick and MZ solid brick. Use in dry interior rooms. Set the screw anchor with a tangential impact wrench or by hand. Use for: Collective holder SHS... Technical details Ø: 6 mm Length L: 50 mm Head Ø: 11 mm Nominal bore Ø: 5 mm Clamping range t fix: 5 mm Recommended torque: 10 Nm Torx drive: T30 Material: Steel, galvanized according to DIN EN ISO 2081/4042, blue passivated Approval no.: ETA-15/0784
Sales unit: 100 pieces
Lieske Part No.: 1348981

Schraubanker mit Sechskantkopf und metrischem Anschlußgewinde M 6. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR 2/2015) bitte Zusatzvorschriften beachten! Anwendung : Anzahl und Anordnung der Schraubanker sind der Ausführungsplanung bzw. dem statischen Nachweis zu entnehmen und einzuhalten. Einbau und Montage gemäß Europäisch Technischer Bewertung ETA-15/0784 bzw. Montageanleitung im gerissenen und ungerissenen Beton C20/25 bis C50/60. Bei der Bemessung ist der gesamte Zulassungsbescheid ETA-15/0784 zu beachten. Zur Verwendung in Mauerwerk gemäß Europäisch Technischer Bewertung ETA-20/0132. Für Kalksandstein KS, Kalksandlochstein KSL und Vollziegel MZ liegt ein Brandschutzgutachten für den Funktionserhalt vor. Verwendung in trockenen Innenräumen. Setzen des Schraubankers mit Tangential Schlagschrauber oder von Hand. Verwendung für : Schraubabstandschellen SAS... Rohr- und Kabelabstandschellen 85... G Technische Angaben Ø : 6 mm Gesamtlänge L : 55 mm Bohrnenn-Ø : 5 mm Anschlußgewinde : M 6 empfohlenes Drehmoment : 10 Nm Schlüsselweite : SW 10 Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert Zulassungs-Nr. : ETA-15/0784
Sales unit: 100 pieces
Lieske Part No.: 691747

Schraubanker mit großem Flachrundkopf und Torxantrieb T30. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR 2/2015) bitte Zusatzvorschriften beachten! Anwendung : Anzahl und Anordnung der Schraubanker sind der Ausführungsplanung bzw. dem statischen Nachweis zu entnehmen und einzuhalten. Einbau und Montage gemäß Europäisch Technischer Bewertung ETA-15/0784 bzw. Montageanleitung im gerissenen und ungerissenen Beton C20/25 bis C50/60. Bei der Bemessung ist der gesamte Zulassungsbescheid ETA-15/0784 zu beachten. Zur Verwendung in Mauerwerk gemäß Europäisch Technischer Bewertung ETA-20/0132. Für Kalksandstein KS, Kalksandlochstein KSL und Vollziegel MZ liegt ein Brandschutzgutachten für den Funktionserhalt vor. Verwendung in trockenen Innenräumen. Setzen des Schraubankers mit Tangential Schlagschrauber oder von Hand. Verwendung für : Ankerschienen = 18 mm Schlitzweite Technische Angaben Ø : 7,5 mm Länge L : 40 mm Kopf-Ø : 17 mm Bohrnenn-Ø : 6 mm Klemmbereich t fix : 5 mm empfohlenes Drehmoment : 20 Nm Torxantrieb : T30 Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert Zulassungs-Nr. : ETA-15/0784
Sales unit: 100 pieces
Lieske Part No.: 691744

Schraubanker mit großem Flachrundkopf und Torxantrieb T30. Zur Verwendung im Funktionserhalt bzw. für Unterdecken mit brandschutztechnischen Anforderungen (Muster-Leitungsanlagen-Richtlinie MLAR 2/2015) bitte Zusatzvorschriften beachten! Anwendung : Anzahl und Anordnung der Schraubanker sind der Ausführungsplanung bzw. dem statischen Nachweis zu entnehmen und einzuhalten. Einbau und Montage gemäß Europäisch Technischer Bewertung ETA-15/0784 bzw. Montageanleitung im gerissenen und ungerissenen Beton C20/25 bis C50/60. Bei der Bemessung ist der gesamte Zulassungsbescheid ETA-15/0784 zu beachten. Zur Verwendung in Mauerwerk gemäß Europäisch Technischer Bewertung ETA-20/0132. Für Kalksandstein KS, Kalksandlochstein KSL und Vollziegel MZ liegt ein Brandschutzgutachten für den Funktionserhalt vor. Verwendung in trockenen Innenräumen. Setzen des Schraubankers mit Tangential Schlagschrauber oder von Hand. Verwendung für : Ankerschienen = 18 mm Schlitzweite Technische Angaben Ø : 7,5 mm Länge L : 50 mm Kopf-Ø : 17 mm Bohrnenn-Ø : 6 mm Klemmbereich t fix : 15 mm empfohlenes Drehmoment : 20 Nm Torxantrieb : T30 Werkstoff : Stahl, galvanisch verzinkt nach DIN EN ISO 19598/4042, blaupassiviert Zulassungs-Nr. : ETA-15/0784
Sales unit: 100 pieces
Lieske Part No.: 691745

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 60 - 64 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 25 pieces
Lieske Part No.: 1315988

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 26 - 30 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 50 pieces
Lieske Part No.: 1315971

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 32 - 36 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 50 pieces
Lieske Part No.: 460741

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 38 - 43 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 25 pieces
Lieske Part No.: 460744

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 68 - 72 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 25 pieces
Lieske Part No.: 1315970

E-clips, pipe clamp with rubber insert, two-part, with threaded connection for both thread sizes, for threaded rod suspension. Dimensions (approx. dimensions) for pipe Ø: 99 - 105 mm for threaded connection: M 8 / M 10 Pipe clamp material: steel, galvanized/chromated according to DIN 50021 Rubber insert material: TPE (thermoplastic elastomers)
Sales unit: 25 pieces
Lieske Part No.: 1315969