Netsys NV-450M 4-Port G.fast Modem Master max 500Mbps
|
-15% 194,94 EUR 228,00 EUR |
|
|
( 231,98 EUR incl. VAT ) ≈ £163.16 | ≈ $214.24 plus delivery charges: 55,00 € |
|
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |
| Datasheet: | file_download Download |
|---|---|
| Lieske Part No.: | 1548120 |
| Mfg Part No: | NV-450M |
| Weight: | 0.123 kg |
Product information for Netsys NV-450M:
Applications
The NV-450M is suitable for use in networks with limited copper infrastructure, where extending the range over existing telephone lines is necessary. The maximum range of 500 metres makes the device particularly interesting for small to medium enterprises as well as carrier applications, where a cost-efficient connection over existing cable structures is desired. The integrated splitter function enables simultaneous use of the line for data transmission and analogue telephony (POTS/ISDN).
Functions and Equipment in Detail
The device features four RJ45 ports with speeds of 10/100/1000 Mbps, which can be used to connect computers, switches or other network devices. An RJ11 port and a combined RJ11/terminal block port allow connection to analogue telephone systems or ISDN systems. The integrated splitter separates data and voice signals, enabling both services to operate simultaneously over the same line. The static routing function supports configuration of network paths without dynamic protocols, which may be required for certain carrier or enterprise applications.
Technology Explained Simply
The NV-450M uses G.fast technology, which enables high data transmission rates over short copper lines. The maximum bandwidth is 500 Mbps, although the actual speed depends on line length and quality. Management is performed via HTTP, allowing easy configuration through a web browser. The device supports IPv6, which is important for modern networks with high device density. The integrated firewall provides functions such as packet and URL filtering, as well as the ability to set up a DMZ (Demilitarized Zone) to operate specific devices in the network more securely. The surge protection on the Line port protects the device from voltage spikes caused by external influences.
Compatibility and Accessories
The device is designed for use in VDSL and Carrier Ethernet environments and can be combined with compatible G.fast end devices (slave modems) to establish a bidirectional connection over copper lines. Compatibility with existing telephone systems is ensured by the integrated splitter function and RJ11 connectors. Support for IPv6 and static routing also makes it suitable for specific network architectures that do not use dynamic routing protocols.
Installation and Mounting
Installation is performed via the connection options on the device: The RJ45 ports are connected to network devices, the RJ11 ports to telephone systems. The Line port is connected to the copper line over which data transmission takes place. Power supply is provided by the included power adapter. Configuration is done via the web interface using HTTP, requiring the device's IP address to be identified within the network. Firmware can be updated via the web interface, with a dual firmware image backup enabling recovery in case of failure.
Advantages in Operation
The NV-450M offers a cost-efficient way to utilise existing copper lines for data transmission without requiring expensive fibre optic infrastructure. The integrated firewall and IPv6 support enhance the device's security and future-proofing. The static routing function enables precise network configuration, which is important for carrier and enterprise applications.
| General | |
| Transmission range | 500 m |
| Ethernet ports | 4 x 10/100/1000 Mbps RJ45 |
| Telephone connection | 1x RJ11 |
| Combo port | 1x RJ11/terminal block for POTS/ISDN |
| Splitter | Integrated |
| Routing | Static |
| Management | HTTP |
| IPv6 | supported |
| Firewall | Packet and URL filtering, DMZ |
| Over voltage protection | for Line-Port |
| Firmware backup | Dual Image |
| Current supply | including power adapter |
Questions & answers
What is the delivery time of Netsys NV-450M 4-Port G.fast Modem Master max 500Mbps?
The article Netsys NV-450M 4-Port G.fast Modem Master max 500Mbps is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Netsys NV-450M to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Netsys NV-450M 4-Port G.fast Modem Master max 500Mbps always at the best possible price. We can give you a discount of 2% on Netsys NV-450M 4-Port G.fast Modem Master max 500Mbps if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.




