Netsys NV-450M

Netsys NV-450M G.fast modem master 4-port

Netsys NV-450M G.fast modem master 4-port

Lieske Part No. 1548120
Mfg Part No NV-450M
EAN-Code
Manufacturer Netsys
Here only 194,94 EUR
231,98 EUR incl. VAT

Further information for Netsys NV-450M G.fast modem master 4-port

General
Transmission range500 m
Ethernet ports4 x 10/100/1000 Mbps RJ45
Telephone connection1x RJ11
Combo port1x RJ11/terminal block for POTS/ISDN
SplitterIntegrated
RoutingStatic
ManagementHTTP
IPv6supported
FirewallPacket and URL filtering, DMZ
Over voltage protectionfor Line-Port
Firmware backupDual Image
Current supplyincluding power adapter
The Netsys NV-450M is a G.fast Bridge Modem operating in Master or CO mode, designed for data transmission over existing copper lines up to 500 metres. The device serves as a central unit in VDSL or Carrier Ethernet networks and enables the connection of multiple end devices via Ethernet ports. It is designed for use in office and carrier environments where a stable, high-speed connection over existing telephone lines is required.

Applications

The NV-450M is suitable for use in networks with limited copper infrastructure, where extending the range over existing telephone lines is necessary. The maximum range of 500 metres makes the device particularly interesting for small to medium enterprises as well as carrier applications, where a cost-efficient connection over existing cable structures is desired. The integrated splitter function enables simultaneous use of the line for data transmission and analogue telephony (POTS/ISDN).

Functions and Equipment in Detail

The device features four RJ45 ports with speeds of 10/100/1000 Mbps, which can be used to connect computers, switches or other network devices. An RJ11 port and a combined RJ11/terminal block port allow connection to analogue telephone systems or ISDN systems. The integrated splitter separates data and voice signals, enabling both services to operate simultaneously over the same line. The static routing function supports configuration of network paths without dynamic protocols, which may be required for certain carrier or enterprise applications.

Technology Explained Simply

The NV-450M uses G.fast technology, which enables high data transmission rates over short copper lines. The maximum bandwidth is 500 Mbps, although the actual speed depends on line length and quality. Management is performed via HTTP, allowing easy configuration through a web browser. The device supports IPv6, which is important for modern networks with high device density. The integrated firewall provides functions such as packet and URL filtering, as well as the ability to set up a DMZ (Demilitarized Zone) to operate specific devices in the network more securely. The surge protection on the Line port protects the device from voltage spikes caused by external influences.

Compatibility and Accessories

The device is designed for use in VDSL and Carrier Ethernet environments and can be combined with compatible G.fast end devices (slave modems) to establish a bidirectional connection over copper lines. Compatibility with existing telephone systems is ensured by the integrated splitter function and RJ11 connectors. Support for IPv6 and static routing also makes it suitable for specific network architectures that do not use dynamic routing protocols.

Installation and Mounting

Installation is performed via the connection options on the device: The RJ45 ports are connected to network devices, the RJ11 ports to telephone systems. The Line port is connected to the copper line over which data transmission takes place. Power supply is provided by the included power adapter. Configuration is done via the web interface using HTTP, requiring the device's IP address to be identified within the network. Firmware can be updated via the web interface, with a dual firmware image backup enabling recovery in case of failure.

Advantages in Operation

The NV-450M offers a cost-efficient way to utilise existing copper lines for data transmission without requiring expensive fibre optic infrastructure. The integrated firewall and IPv6 support enhance the device's security and future-proofing. The static routing function enables precise network configuration, which is important for carrier and enterprise applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1548120
qrcode für Netsys NV-450M G.fast modem master 4-port