Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

projector bulbs from NEC

Manufacturer no. Description Price Anzahl Bestellen
NEC 39 replacement lamp for NP2150
The item is a replacement lamp for the NEC NP2150 projector, manufactured under the designation NP06LP (also identified as 60002234). This lamp serves as a direct replacement for the light sources installed in the projector, ensuring sustained image quality and brightness. The lamp is specifically developed for use in projectors by the manufacturer NEC and replaces the original lamps installed in the device when their service life ends or performance declines.

Replacement lamp for projectors is a central component of maintenance and servicing of projector devices. The lamp is directly installed into the projector, with mounting typically requiring a simple replacement procedure that usually does not require tools. Compatibility is limited to the model type NEC NP2150, with the manufacturer's number NP06LP serving as the unique identification for this replacement part.

Power of the lamp is 330 watts. This power is required to produce a bright and even projection surface suitable for presentations, conferences, or screen transmissions in offices, schools, or conference rooms. The power corresponds to the standard specified for projectors of this series to ensure optimal image reproduction.

Technology explained clearly – The lamp is based on a high-performance discharge lamp developed for use in projectors. The light source produces bright, white light that is projected onto a surface via the projection lens. The lamp's lifespan depends on usage and operating conditions, with a typical usage duration of several thousand hours expected. The lamp is not intended for direct operation outside the projector and must always be installed in the device to function correctly.

Compatibility and accessories – The lamp is exclusively intended for the NEC NP2150 projector. Use in other projectors is not recommended and may cause damage. The manufacturer's number NP06LP is the unique identification that should be used when ordering or replacing the lamp.

Installation and mounting – Installation typically involves removing the front cover of the projector, where the lamp is seated in a special mounting system. The exact mounting instructions are described in the projector's user manual. No special tools are required, although careful handling is necessary to avoid damaging the lamp or the device. The lamp is not designed for operation outside the projector.

Advantages in operation – Using an original-compatible replacement lamp such as the NP06LP ensures consistent light output and color accuracy. The lamp is designed for use in professional environments where high reliability and low maintenance frequency are required. The 330-watt power output provides sufficient brightness to enable clear projection even in larger rooms. The lamp's lifespan is comparable to other replacement lamps for this projector model type, with the exact runtime depending on usage and operating conditions.

The delivery time for projector lamps is stated to be approximately 1 to 3 weeks. This should be considered when planning maintenance work or replacement measures to avoid operational interruptions. The lamp is delivered as a single replacement part.
Lieske Part No.: 1693427
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
42,57 EUR
NEC LT245 projector lamp Whitebox
The NEC LT245 projector lamp is a replacement light module for projectors of the brand NEC, specifically developed for use in devices compatible with the LT245 type. As a replacement lamp, it serves to restore full light output and image quality after wear of the original lamp. The product is delivered in a white box packaging, meeting the technical standard for replacement lamps in the professional sector. The lamp is designed with a rated power of 220 watts, ensuring sufficient brightness and image sharpness for typical projection applications.

Applications

The lamp is primarily designed for use in projectors bearing the type designation LT245. It is used in professional environments such as conference rooms, schools, universities, or small event spaces where clear and bright projection is required. The white box packaging indicates standardization, suitable for exchange in technical maintenance situations.

Functions and Equipment in Detail

The projector lamp features a power rating of 220 watts, ensuring sufficient light output for indoor operation. Designed as a replacement part, it restores the original performance of the projector. The packaging is executed as a white box, meaning it contains no brand labeling or special packaging elements, emphasizing the technical core of the product. This is common for replacement lamps used in maintenance and exchange processes.

Technology Explained Simply

The lamp operates with an electrical power of 220 watts, typical for light generation in projectors. The light source is designed to produce high light intensity while simultaneously dissipating heat. The white box packaging protects the module during transport and ensures easy handling during replacement. The lamp is not supplied with additional components such as cables, adapters, or instructions, as it is designed as a purely technical replacement part.

Compatibility and Accessories

The lamp is specifically designed for projectors with the type designation NEC LT245. Compatibility is limited to this model series, with the manufacturer's number LT60LPK serving as an identifying feature.

Installation and Mounting

Installation is performed by replacing the old lamp in the projector. The lamp is inserted into the designated socket system, with exact mounting instructions provided by the respective projector manufacturer. The white box packaging does not include additional mounting instructions or tools. Installation requires basic knowledge of projector maintenance and should be carried out in accordance with safety regulations.

Advantages in Operation

The use of the replacement lamp enables rapid restoration of projection quality without replacing the entire projector. The 220-watt power output ensures consistent brightness suitable for professional presentations. The white box packaging facilitates replacement, as it contains no additional packaging elements that could slow down the mounting process. The lamp is designed as a replacement part to ensure operational reliability and continuity.

Product Type

The lamp is a replacement part for projectors, specifically for the NEC LT245 model series. As a projector lamp, it serves to renew the light source in the device.

Core Function

The core function consists in generating light for projection, with the 220-watt power output ensuring sufficient brightness.

Technology

The lamp operates with an electrical power of 220 watts, which is typical for projectors. The white box packaging is a standard for replacement lamps.

Standard

The packaging conforms to the white box standard, commonly used in the industry for replacement lamps. There are no specific standard references in the datasheet.

Compatibility

The lamp is specifically designed for projectors with the type designation NEC LT245. The manufacturer's number LT60LPK serves as an identification feature.

Packaging Type

The lamp is delivered in a white box packaging, meeting the technical standard for replacement lamps.
Lieske Part No.: 533407
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
165,28 EUR
NEC M311X projector lamp NP15LP
This replacement lamp is designed for use in projectors of type NEC M311X. It is offered as a Whitebox solution, meaning it is delivered without specific brand packaging or manufacturer accessories. The lamp is identified by the manufacturer's number NP15LP and features a rated power of 185 watts. It serves as a direct replacement for the light sources installed in the projection device, ensuring sustained image quality and brightness.

Projector lamp

The lamp is specifically developed for use in projector devices requiring high light output and stable operating parameters. As a replacement part, it enables the restoration of the projector’s original performance once the original lamp has reached its service life. Using a compatible replacement lamp is essential to maintain the sharpness, color accuracy, and brightness of the projected image.

Performance and operation

With a power rating of 185 watts, the lamp provides sufficient light output for operating the NEC M311X projector. This power level is typical for projectors of this class and ensures adequate brightness for presentations in rooms with low to moderate ambient lighting. The lamp is installed directly into the projector housing and is designed for operation under normal environmental conditions.

Compatibility and accessories

The lamp is specifically designed for the projector model NEC M311X and corresponds to the manufacturer's number NP15LP. It is intended as a direct replacement part. Installation involves removing the old lamp and inserting the new one into the projector housing, following the projector’s mounting instructions.

Mounting and installation

The lamp is mounted inside the projector housing, and the exact steps must follow the projector’s mounting instructions. The lamp is designed for direct replacement and does not require additional tools or special modifications. Installation typically involves removing the old lamp and inserting the new one into the designated socket system.

Operation in daily use

During operation, the lamp ensures uniform light output and extends the projector’s lifespan by restoring its original performance. Using a compatible replacement lamp prevents image degradation and ensures reliable projection. The lamp is suitable for use in office environments, schools, or conference rooms where stable and bright projection is required.

Scope of delivery

The lamp is delivered as a single replacement part, without additional packaging or documentation. Installation is carried out according to the projector’s instruction manual.

Conclusion

The lamp is a technically compatible replacement part for the NEC M311X projector. It is delivered as a Whitebox solution, without additional packaging or accessories. Installation follows the projector’s instruction manual, and the lamp ensures stable and bright projection. Delivery time may take up to three weeks; therefore, timely ordering is recommended.

End of text

Installation is carried out according to the projector’s instruction manual, without additional tools or accessories. Delivery time may take up to three weeks; therefore, timely ordering is recommended.
Lieske Part No.: 967281
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
68,44 EUR
NEC NP215G projector lamp Whitebox
The Whitebox projector lamp for the NEC NP215G is a replacement module for restoring light output in the projection device. It is offered under the manufacturer's part number NP13LP and is specifically designed for use in projectors of type NEC NP215G. This lamp serves as a direct replacement for the worn-out or defective original light module, enabling continued projection functionality without replacing the entire device. The use of a compatible replacement lamp is essential for the maintenance and longevity of the projector.

Replacement lamp for projectors is standard in the maintenance of projector devices, as light sources lose brightness over time or fail. The Whitebox lamp is a cost-effective alternative that performs the same function as the original module. The term Whitebox refers to the packaging, which does not carry any brand identity but only includes technical specifications and compatibility information.

Compatibility is a central feature of this lamp. It is developed for the NEC NP215G, a projector model used in office environments, schools, or small conference rooms. The lamp is identified as NP13LP, which defines the technical specifications and fit for the device. Using an incompatible lamp may result in malfunctions or damage to the projection device.

Technical design of the lamp includes a housing that integrates the light source and necessary electrical connections. The lamp is inserted into the projection device, where the mechanical fit and electrical connection ensure proper operation. The exact shape and electrical connections are adapted to the requirements of the NEC NP215G.

Light output and lifespan are key factors when selecting a replacement lamp. Although sources do not specify exact values for lumens or lifespan, the lamp is designed to restore the original brightness and operating time of the projector. Using a quality-compatible replacement lamp extends the projector’s service life and reduces overall maintenance costs.

Installation and replacement are performed by removing the old module from the projector housing and inserting the new lamp. Installation typically requires no special tools, but careful handling is necessary to avoid damage to electrical contacts or the housing. Installation instructions are usually included in the projector housing or in the user manual.

Operational safety is ensured by using a compatible replacement lamp. The lamp is designed to meet the electrical and thermal requirements of the projector. An incorrect or incompatible lamp may cause overheating, power supply issues, or premature failure.

It is common for a replacement lamp to be delivered in simple packaging that protects the module and includes technical data. The term Whitebox implies neutral packaging without brand features.

The lamp is designed as a replacement part for the NEC NP215G and is not combined with any other products.

Maintenance and operation benefit from timely replacement planning. Therefore, it is advisable to order the replacement lamp in advance to avoid operational interruptions. The lifespan of a lamp depends on usage frequency and operating conditions.

The lamp is specifically developed for the NEC NP215G to restore the projector’s original performance. Using a compatible replacement lamp is crucial for the device’s functionality and longevity. The Whitebox packaging indicates a neutral, technically correct alternative without brand identity.
Lieske Part No.: 197614
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
66,22 EUR
NEC NP216 projector lamp Philips NP13LP
The projector lamp of type NEC NP216 is a bare lamp by Philips, specifically developed for use in projectors manufactured by NEC. It serves as a replacement lamp for the NEC NP216 projector and is marketed under the manufacturer's part number NP13LP. The lamp is a replacement component to restore the light output and image quality of the projector when the original lamp is worn out or defective.

Applications

The lamp is exclusively intended for the NEC NP216 projector. It is used in professional and private environments where a projector is employed for image display, for example in conference rooms, schools, presentation rooms, or home cinema systems. The use occurs within the context of maintenance and servicing of the projector to maintain its performance and image quality.

Functions and Equipment in Detail

The lamp features a power rating of 225 watts, which is necessary for the required light intensity and brightness in the projector. The high power enables sufficient image brightness, especially for larger screens or in rooms with higher ambient lighting. The lamp is designed as a replacement part and replaces the original lamp installed in the projector. The term “bare lamp” means that it is delivered without an integrated housing or additional electronic components and must be installed into the projector housing.

Technology Explained Simply

The bare lamp is the actual light source responsible for image projection in the projector. It consists of a filament system that is heated by electric current and emits light. The power of 225 watts is necessary for the required light output in the projector to produce a sharp and bright image. The lamp is not connected to a protective housing or an electronic control module, but is directly installed into the projector module. The term “bare” here describes the absence of mechanical or electronic encasement.

Compatibility and Accessories

The lamp is specifically compatible with the NEC NP216 projector. The manufacturer's part number NP13LP uniquely identifies the lamp and ensures compatibility with the respective projector model.

Installation and Mounting

The installation of the lamp involves removing the old lamp from the projector and inserting the new one. The lamp is placed into the lamp compartment of the projector, with the exact mounting instructions corresponding to the specific projector model. Installation typically involves opening the lamp compartment, removing the old lamp, and inserting the new one. The lamp must be correctly positioned to ensure safe and stable operation.

Advantages in Operation

The use of the bare lamp enables cost-effective projector maintenance, as only the light source is replaced, not the entire lamp module. The high power of 225 watts ensures sufficient image brightness. The lamp is available as a replacement part and can be ordered as needed. The delivery time is stated to be approximately 1 to 3 weeks, so timely ordering is recommended to avoid operational interruptions. The lamp is not supplied with a housing or additional components, which simplifies replacement but also requires careful handling, as no additional protective packaging is included.
Lieske Part No.: 633971
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
44,84 EUR
NEC P451W projector lamp NP23LP
The projector lamp module for the NEC P451W is a replacement module for maintenance and renewal of the projection lamp in the projector. It is specifically developed for use in the NEC P451W model and replaces the worn-out or defective lamp in the device. The lamp is supplied as a module, meaning it is delivered as a complete unit with integrated housing and electrical connections, enabling easy and secure installation in the projector. The manufacturer's number NP23LP uniquely identifies the module and ensures compatibility with the intended projector.

Applications
This lamp module is exclusively intended for the NEC P451W projector. It serves to restore light output and image quality when the original lamp is worn out or no longer provides sufficient brightness. Use in other projector models is not intended and may lead to malfunctions or damage. The lamp is suitable for use in professional and commercial environments where high light output and reliability are required.

Functions and Features in Detail
The module has a power rating of 270 watts, which is necessary for generating sufficient light output in the projector. The lamp is designed as a replacement part to restore the original performance of the projector. The module is housed in a casing that mechanically protects the lamp and provides electrical connections for integration into the projector. Installation is carried out by inserting the module into the designated lamp compartment of the projector, where the electrical contacts are automatically connected.

Technology Explained Simply
The projector lamp operates using a high-performance discharge lamp that generates intense light emission at a 270-watt operating voltage. This light source is necessary to adequately illuminate the projection surface and produce a sharp, bright image. The module is designed to meet the electrical and mechanical requirements of the NEC P451W projector. The integrated control and safety functions of the projector automatically recognize the module once it is installed.

The lamp is not intended for direct use outside the projector. The operating voltage of 270 watts is designed for the internal power supply of the projector and requires a special electrical drive system integrated within the projector.

Compatibility and Accessories
The lamp module is exclusively compatible with the NEC P451W projector. It is not intended for other projector models. The manufacturer's number NP23LP ensures precise fit and electrical compatibility. There are no additional accessories specifically recommended or required for this module. Installation is carried out without additional tools or components.

Installation and Mounting
Installation of the lamp module involves removing the old module from the projector and inserting the new module into the designated lamp compartment. The electrical contacts are automatically connected during this process. The installation does not require special tools, but adherence to the projector's mounting instructions is necessary to avoid damage. After installation, the projector is restarted to recognize and initialize the new lamp.

Operational Advantages
Using the original-compatible lamp module NP23LP ensures optimal image quality and light output. The lamp is designed for reliable and stable operation, minimizing interruptions during use. The easy replaceability enables quick maintenance and minimizes projector downtime. Compatibility with the NEC P451W projector ensures safe and seamless integration without additional modifications.

Note: Batteries are not included in the delivery scope.
Lieske Part No.: 505112
Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline
265,50 EUR
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
To the shopping cart Continue shopping
We use cookies to provide the service. Using this website you agree with that. Information on the privacy policy OK und schließen

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.