Moxa SFP-1G20ALC , SFP interface module, Tx 1310 nm content_copy

The Moxa SFP-1G20ALC is a Gigabit Ethernet SFP module of the SFP-1G series, developed as optional accessory for industrial Ethernet switches from Moxa. It enables wireless connection via fiber optic cables and allows extending existing networks with an optical interface featuring high bandwidth and range. The module is hot-pluggable, meaning it can be inserted into or removed from the switch without interrupting network operation. It supports digital diagnostic monitoring (DDM), enabling real-time monitoring of optical parameters such as transmit power, receive sensitivity, and temperature to detect network issues early.

Applications
This module is designed for industrial applications requiring high reliability, temperature resistance, and harsh environmental conditions. It is suitable for use in production facilities, power supply networks, transportation systems, or marine environments, where stable and low-maintenance communication links are essential. The operating temperature range of -40 to 85 °C (T-model) makes it suitable for extreme environments, such as outdoor installations, climate control systems, or vehicles.

Functions and Features in Detail
The SFP-1G20ALC operates with differential LVPECL signals and TTL detection, ensuring stable and noise-resistant signal transmission. It features an LC duplex connector, used for connection to standard fiber optic cables. The model designation SFP-1G20ALC indicates single-mode transceiver technology, operating at a wavelength of 1310 nm and enabling a maximum reach of 20 km. This is particularly relevant for long-distance connections in industrial networks, where copper cables are no longer feasible due to range or susceptibility to interference.

Technology Explained Simply
The optical power of the module ranges from -9.5 to +5 dBm (transmit power) and a sensitivity up to -33 dBm (receive). The link budget is up to 31 dB, describing the maximum attenuation the signal can overcome over the cable without breaking the connection. The dispersion penalty of 1–5 dB accounts for signal distortion caused by chromatic dispersion, which occurs over long fiber optic links. For models with higher reach such as SFP-LHX, ZX, EZX, EZX-120, and WDM models, an attenuator is recommended to optimize signal quality.

Compatibility and Accessories
The module is compatible with a wide range of industrial Ethernet switches from Moxa that feature SFP slots. It is part of the SFP-1G series, which also includes models for multi-mode and WDM fibers. The WDM models (e.g. SFP-20A/B) allow using two wavelengths on a single cable, increasing the capacity of existing fiber optic infrastructures. The use of certified cables is required for certain models (e.g. SFP-LSX with OM1/OM2) to achieve full reach.

Installation and Mounting
Installation is done by simply inserting the module into the SFP slot of the switch. Due to the hot-pluggable feature, no network downtime is required. Connection to the fiber optic cable is made via the LC duplex connector. Power supply is provided by the switch; the module consumes a maximum of 1 W.

Operational Advantages
The combination of wide temperature range, DDM function, hot-pluggable design, and high reach makes the module a robust solution for demanding industrial environments. The 5-year warranty underscores the product’s reliability. Certifications to UL 62368-1, IEC 62368-1, EN 60825-1, EN 55032/35, FCC Part 15B, ICES-003, and IEC 61000-4-2 to -4-11, as well as marine approval according to DNV, ensure safety and EMC compliance.

Scope of Delivery
The scope of delivery includes 1 x SFP-1G module and 1 x warranty card.

General
Range	20 km
Maximum power consumption	1 W
Dispersion penalty	1–5 dB

---