Moxa CSM-200-1213
|
267,00 EUR |
|||||||||||
|
( 317,73 EUR incl. VAT ) ≈ £222.68 | ≈ $298.24 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 944763 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | CSM-200-1213 | ||||||||||
| Weight: | 0.2 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Moxa CSM-200-1213:
The Moxa CSM-200-1213 is a Hot-Swap-capable Ethernet-to-fibre optic slide-in module, specifically designed for the modular NRack System™ by Moxa. It enables reliable conversion of 10/100BaseT(X) Ethernet signals into 100BaseFX fibre optic signals, allowing flexible and maintenance-friendly integration into industrial network infrastructures. The module is designed for use in modular enclosures of the NRack system and offers Hot-Swap functionality, enabling modules to be replaced without interrupting operation.
Applications
This module is designed for industrial networks requiring high modularity, fault tolerance, and rapid maintenance. It is particularly suitable for applications where Ethernet connections must be transmitted over fibre optic cables over long distances or in environments with electromagnetic interference. Use in modular enclosures enables scalable network equipment that can adapt to changing requirements.
Functions and Features in Detail
The CSM-200-1213 features an RJ45 interface for 10/100BaseT(X) Ethernet with Auto-Negotiation and Auto-MDI/MDI-X, enabling automatic adaptation to connection partners. The fibre optic side is equipped with an ST connector for multimode fibre optic cable. The modules support two operating modes: Store-and-Forward, where data packets are fully received and checked before forwarding, and Pass-Through, where data packets are forwarded directly, enabling lower latency. The Link Fault Pass-Through (LFP) and Far End Fault (FEF) functions enable rapid fault detection, allowing network disruptions to be quickly localized.
Technology Explained Simply
The integrated magnetic isolation of 1.5 kV protects the module from electrical interference and voltage spikes, enhancing reliability in industrial environments. Auto-Negotiation ensures that connection settings (e.g. speed, duplex mode) between the module and the connected device are automatically adjusted. The Plug-and-Play design enables easy installation without additional configuration. Hot-Swap functionality allows the module to be replaced during operation, minimizing network downtime.
Compatibility and Accessories
The module is exclusively suitable for the Moxa NRack System™ chassis. It is not designed for other enclosures or systems. The model designation CSM-200-1213 refers to the multimode variant with ST connector. Other variants in the series, such as CSM-200-1214 (multimode, SC connector) or CSM-200-1218 (singlemode, SC connector), are also available, but not part of this article.
Installation and Mounting
Installation is performed by inserting the module into a free slot in the NRack System enclosure. Hot-Swap functionality allows replacement without shutting down the system. Cabling is done via the RJ45 interface for Ethernet and the ST connector for fibre optic. No additional tools or configurations are required.
Operational Advantages
The combination of Hot-Swap functionality, automatic negotiation, and integrated fault detection (LFP, FEF) increases network availability and ease of maintenance. Magnetic isolation protects against interference, and Plug-and-Play installation reduces setup time. The module is therefore particularly suitable for applications requiring high operational reliability and rapid maintenance.
Applications
This module is designed for industrial networks requiring high modularity, fault tolerance, and rapid maintenance. It is particularly suitable for applications where Ethernet connections must be transmitted over fibre optic cables over long distances or in environments with electromagnetic interference. Use in modular enclosures enables scalable network equipment that can adapt to changing requirements.
Functions and Features in Detail
The CSM-200-1213 features an RJ45 interface for 10/100BaseT(X) Ethernet with Auto-Negotiation and Auto-MDI/MDI-X, enabling automatic adaptation to connection partners. The fibre optic side is equipped with an ST connector for multimode fibre optic cable. The modules support two operating modes: Store-and-Forward, where data packets are fully received and checked before forwarding, and Pass-Through, where data packets are forwarded directly, enabling lower latency. The Link Fault Pass-Through (LFP) and Far End Fault (FEF) functions enable rapid fault detection, allowing network disruptions to be quickly localized.
Technology Explained Simply
The integrated magnetic isolation of 1.5 kV protects the module from electrical interference and voltage spikes, enhancing reliability in industrial environments. Auto-Negotiation ensures that connection settings (e.g. speed, duplex mode) between the module and the connected device are automatically adjusted. The Plug-and-Play design enables easy installation without additional configuration. Hot-Swap functionality allows the module to be replaced during operation, minimizing network downtime.
Compatibility and Accessories
The module is exclusively suitable for the Moxa NRack System™ chassis. It is not designed for other enclosures or systems. The model designation CSM-200-1213 refers to the multimode variant with ST connector. Other variants in the series, such as CSM-200-1214 (multimode, SC connector) or CSM-200-1218 (singlemode, SC connector), are also available, but not part of this article.
Installation and Mounting
Installation is performed by inserting the module into a free slot in the NRack System enclosure. Hot-Swap functionality allows replacement without shutting down the system. Cabling is done via the RJ45 interface for Ethernet and the ST connector for fibre optic. No additional tools or configurations are required.
Operational Advantages
The combination of Hot-Swap functionality, automatic negotiation, and integrated fault detection (LFP, FEF) increases network availability and ease of maintenance. Magnetic isolation protects against interference, and Plug-and-Play installation reduces setup time. The module is therefore particularly suitable for applications requiring high operational reliability and rapid maintenance.
| General | |
| Auto-negotiation | |
| Auto-MDI/MDI-X | |
Please note...
If you pay by prepayment or on account, we will ship this article for free within Germany ! Note that although the delivery charges will be shown to you in the shopping cart, we won't charge them.
Questions & answers
What is the delivery time of Moxa CSM-200-1213 ?
The article Moxa CSM-200-1213 is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Moxa CSM-200-1213 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Moxa CSM-200-1213 always at the best possible price. We can give you a discount of 2% on Moxa CSM-200-1213 if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 4 pieces of Moxa CSM-200-1213 we can offer you a price of 254,98 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.