Moxa A53 (incl. CN20030) DB25F
|
84,00 EUR |
|||||||||||
|
( 99,96 EUR incl. VAT ) ≈ £70.31 | ≈ $92.32 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 905790 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | A53 | ||||||||||
| Weight: | 0.2 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Moxa A53:
Applications
The converter is designed for use in industrial environments where robust and interference-resistant communication is required. Typical application scenarios include networking machines, controls, sensors, or other devices communicating via serial interfaces. The support for RS-485 in 2- and 4-wire topologies makes it particularly suitable for bus systems, where multiple devices are connected via a common cable. The compact design and desktop mounting allow for easy installation without additional mounting hardware.
Functions and Features in Detail
The A53 features two serial ports accessible via a 10-pin RJ45 connector. The interfaces support RS-232 with signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, and GND; RS-422 with Tx±, Rx±, RTS±, CTS±, and GND; and RS-485 in 4-wire (Tx±, Rx±, GND) and 2-wire (Data±, GND) configurations. The automatic data direction control (ADDC) for RS-485 ensures that the communication direction is detected without manual configuration. Additionally, the converter supports flow control via RTS/CTS, stabilizing data transmission in bidirectional connections.
Technology Explained Simply
A central feature of the A53 is galvanic isolation with 2 kV, available only for this model. This isolation protects the device and connected equipment from voltage spikes caused by electrical interference or potential differences. This is particularly important in noisy environments, such as those found in production facilities or when using high-voltage equipment. Power supply is via a power jack with an input range of 9 to 30 VDC. At an operating voltage of 9 VDC, the current consumption is 195 mA. An integrated overcurrent protection safeguards the device against damage from excessive current draw.
Compatibility and Accessories
The converter is compatible with all common serial protocols and can be integrated into existing RS-232 and RS-422/485 networks. The use of RJ45 connectors enables standardized cabling, already established in many industrial environments.
Mounting and Installation
The device is housed in a compact plastic housing designed for desktop mounting. Dimensions are 90 x 60 x 21 mm, and the weight is 85 g. The IP rating IP30 protects against solid foreign objects with a diameter greater than 2.5 mm, but does not protect against water or dust. Mounting requires no additional brackets or fastening elements, enabling quick and easy installation.
Operational Advantages
The A53 offers high operational reliability through integrated galvanic isolation and robust EMC and EMS certification. Certifications include EMC standards such as EN 55032/35, CISPR 32, and FCC Part 15B Class A, as well as EMS tests including ESD (4 kV contact, 8 kV air), RS (3 V/m), EFT (1 kV power, 0.5 kV signal), Surge (1 kV), and CS (3 V/m). Environmental tests according to IEC 60068-2-1/-2/-3/-6/-14 and vibration tests according to IEC 60068-2-6 ensure high reliability under industrial conditions. The operating temperature range is 0 to 55 °C, and the storage temperature range is -20 to 75 °C. Humidity is 5 to 95 %, non-condensing. The MTBF is 1,870,854 hours according to Telcordia SR332, highlighting high lifespan and reliability. The warranty is 5 years; further details are available at the specified website.
| General | |
| Serial standards | RS-232, RS-422, RS-485 (2- & 4-wire) |
| RS-232 signals | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 signals | Tx±, Rx±, RTS±, CTS±, GND |
| RS-485 4-wire signals | Tx±, Rx±, GND |
| RS-485 2-wire signals | Data±, GND |
| Data direction control | ADDC (automatic) |
| Flow control | RTS/CTS |
| Connection type | 10-pin RJ45 |
| Number of ports | 2 |
| Input voltage | 9 to 30 VDC |
| Electricity consumption | 195 mA @ 9 VDC |
| Over current protection | Available |
| Power supply | Power socket |
| Housing material | Plastic |
| Degree of protection | IP30 |
| Operation temperature | 0 to 55 °C |
| Storage temperature | -20 to 75 °C |
| Air humidity | 5 to 95 % (non-condensing) |
| Insulation | 2 kV galvanic isolation |
| EMC certification | EN 55032/35, CISPR 32, FCC Part 15B Class A |
| EMS tests | ESD 4 kV (contact), 8 kV (air); RS 3 V/m; EFT 1 kV (power), 0.5 kV (signal); Surge 1 kV; CS 3 V/m |
| Environmental tests | IEC 60068-2-1/-2/-3/-6/-14 |
| Vibration test | IEC 60068-2-6 |
| MTBF | 1.870.854 Hours (Telcordia SR332) |
Questions & answers
What is the delivery time of Moxa A53 (incl. CN20030) DB25F?
The article Moxa A53 (incl. CN20030) DB25F is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Moxa A53 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Moxa A53 (incl. CN20030) DB25F always at the best possible price. We can give you a discount of 2% on Moxa A53 (incl. CN20030) DB25F if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 6 pieces of Moxa A53 (incl. CN20030) DB25F we can offer you a price of 80,22 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

