Microsens MS100223DXB

Small Form Factor Pluggable (SFP) is an exchangeable transceiver module used in compatible active devices. It is compact, smaller than all currently available form factors, and offers the highest density per line interface. Many modern network devices are equipped with slots for modular optical transceivers, providing maximum flexibility in network configuration. Thanks to its special design, installation or replacement can occur during operation (hot-swap) without disrupting the network.

The appropriate SFP module is selected based on the cable medium (multimode, single mode, simplex, or twisted pair) and the desired bandwidth. Standards such as the Multi Source Agreement (MSA) and SFF-8472 specification ensure standardized design and offer optional features such as digital diagnostic capabilities.

With a maximum bandwidth of up to 1.25 GBit/s, the SFP modules support both Gigabit Ethernet and Gigabit Fibre Channel. Various models are tailored for different ranges, temperature conditions, and applications.

Technical Specifications:

• Product Type: SFP (Small Form Factor Pluggable)
• Connector: LC Duplex or LC Simplex (depending on model)
• Supported Protocols: Gigabit Ethernet, Gigabit Fibre Channel
• Bandwidth: 1063 to 1250 MBit/s
• Cable Types: Multimode or Singlemode (depending on model)
• Transmission Ranges:
- Multimode: Up to 0.55 km
- Singlemode: Up to 120 km (depending on model)

• Wavelengths (TX/RX): Model-specific (850 nm, 1310 nm, 1550 nm)
• Operating Temperature:
- Standard: 0 to +70°C
- Extended: -40 to +85°C (depending on model)

• Power Budget: Between 8.5 dB and 32 dB (depending on model)
• Digital Diagnostic Monitoring (DDM): Optional (depending on model)
• Laser Class: Class 1 (safe under normal operation)

Included Items:

• 1x SFP Transceiver Module (depending on selected model)
• User manual (if applicable)

Safety Information:

• Never look directly into optical connectors – risk of irreversible eye damage from visible and invisible laser light.
• Always cover unused optical connectors with protective caps.
• Activate the transmission line only after all connections have been fully completed.

Order Information:

• SFP GbE Transceiver 1.25G SX, Multimode 850nm, LC (Part No.: MS100200)
• SFP GbE Transceiver 1.25G SX, Multimode 850nm, DDM, LC (Part No.: MS100200D)
• SFP GbE Transceiver 1.25G SX, Multimode 850nm, DDM, LC, -40..+85°C (Part No.: MS100200DX)
• SFP GbE Transceiver 1.25G LX, SingleMode 1310nm, 10km, LC (Part No.: MS100210)
• SFP GbE Transceiver 1.25G LX, SingleMode 1310nm, 10km, DDM, LC (Part No.: MS100210D)
• SFP GbE WDM Transceiver 1.25G BX, TX1310nm/RX1550nm, 10km, LC Simplex (Part No.: MS100221DXA)
• SFP GbE WDM Transceiver 1.25G BX, TX1550nm/RX1310nm, 10km, LC Simplex (Part No.: MS100221DXB)
• Additional models are listed in the order information.