Microsens MS100222DXB

The Small Form Factor Pluggable (SFP) is an exchangeable transceiver module used in compatible active devices. Its compact design makes it smaller than all currently available form factors, providing the highest density per line interface. Many modern networking devices are already equipped with slots for modular optical transceivers, giving users maximum flexibility in network configuration. Due to its special design, installation can also be performed during operation (hot-swap) without disrupting the network.

The selection of the appropriate SFP module depends on the type of cable used (multimode, single mode, simplex, or twisted pair) and the required bandwidth. Standards such as the Multi Source Agreement (MSA) and the SFF-8472 specification ensure a standardized design and provide additional benefits such as optional digital diagnostic functionality.

The SFP modules support a maximum bandwidth of up to 1.25 GBit/s and are suitable for Gigabit Ethernet and Gigabit Fibre Channel. Various models are designed for different ranges and temperature conditions, including options for environments with extended requirements.

Technical Specifications:

• Product Type: SFP (Small Form Factor Pluggable)
• Connector: LC Duplex or LC Simplex (depending on model)
• Supported Protocols: Gigabit Ethernet, Gigabit Fibre Channel
• Bandwidth: 1063 to 1250 MBit/s
• Cable Types: Multimode or Singlemode (depending on model)
• Transmission Ranges:
- Multimode: Up to 0.55 km
- Singlemode: 10 km to 120 km (depending on model)

• Wavelengths (TX/RX): Model-specific (850 nm, 1310 nm, 1550 nm)
• Operating Temperature:
- Standard: 0 to +70°C
- Extended: -40 to +85°C (depending on model)

• Power Budget: Between 8.5 dB and 32 dB (depending on model)
• Digital Diagnostic Monitoring (DDM): Optional (depending on model)
• Laser Class: Class 1 (safe under normal operation)

Included Items:

• 1x SFP Transceiver Module (depending on selected model)
• User manual (if applicable)

Safety Information:

• Never look directly into optical connectors – risk of irreversible eye damage from visible and invisible laser light.
• Always cover unused optical connectors with protective caps.
• Activate the transmission line only after all connections have been fully completed.

Order Information:

• SFP GbE Transceiver 1.25G SX, Multimode 850nm, LC (Part No.: MS100200)
• SFP GbE Transceiver 1.25G LX, SingleMode 1310nm, 10km, LC (Part No.: MS100210)
• SFP GbE Transceiver 1.25G LHX, SingleMode 1310nm, 25km, LC (Part No.: MS100211)
• SFP GbE Transceiver 1.25G EX, SingleMode 1550nm, 50km, LC (Part No.: MS100213D)
• SFP GbE Transceiver 1.25G ZX, SingleMode 1550nm, 80km, LC (Part No.: MS100214D)
• SFP GbE Transceiver 1.25G WDM, TX1310nm/RX1550nm, 10km, LC Simplex (Part No.: MS100221DXA)
• Additional models can be found in the order information.