MICROSENS MS100192DX SFP FE Transceiver 155 Mbit/s FX SingleMode 1310 nm, 40 km, DDM, LC, -40..+85 °C
|
146,30 EUR |
|||||||||||
|
( 174,10 EUR incl. VAT ) ≈ £122.45 | ≈ $160.78 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 1504627 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | MS100192DX | ||||||||||
| Weight: | 0.2 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for MICROSENS MS100192DX:
Applications
The transceiver is used in industrial networks, particularly in automation technology, for controlling machines and systems, and in enclosures. It is designed for applications where high temperatures or mechanical stress occur, such as in manufacturing, rail transport, or power generation. The ability to operate at temperatures from -40 °C to +85 °C makes it suitable for use in fanless or passively cooled systems, where thermal stress from fans or active cooling should be avoided. Additionally, it is ideal for communication solutions where fiber optic infrastructure is limited, as it is also available in simplex variants that enable bidirectional data transmission over a single fiber optic cable.
Functions and Features in Detail
The transceiver features an LC connector, optimized for connection with single-mode fiber optic cables. The wavelength is 1310 nm, typical for single-mode applications and ensuring high signal quality over long distances. The integrated DDM function (Digital Diagnostic Monitoring) enables monitoring of operating parameters such as temperature, voltage, optical power, and signal quality. This is particularly useful for remote maintenance and fault diagnosis in decentralized networks. The simplex variant allows the use of a single fiber optic cable for bidirectional communication, offering advantages in limited fiber infrastructure without compromising network performance.
Technology Explained Simply
The transceiver operates in the Fast Ethernet standard, which defines a data rate of 100 Mbit/s. The specified transmission rate of 155 Mbit/s refers to the physical layer and enables the transmission of Ethernet data with sufficient buffer for protocol transitions and error correction. The use of single-mode fiber optic cable with a wavelength of 1310 nm ensures low attenuation and high bandwidth, enabling the 40 km range. The operating temperature range of -40 °C to +85 °C demonstrates the robustness of the device, which operates stably even under extreme environmental conditions. The DDM function provides continuous diagnostic data, which is important for network monitoring and maintenance.
Compatibility and Accessories
The transceiver is designed as an SFP module, making it usable in standard SFP slots of switches, routers, or other network devices. It is compatible with devices that support SFP transceivers in the Fast Ethernet standard. The simplex variant requires a special fiber cable designed for bidirectional transmission.
Mounting and Installation
The transceiver is installed in SFP slots of network devices, with mounting achieved by simply inserting the module. Installation requires no special tools, as the module mechanically fits into the slot. Cabling is done via LC connectors to single-mode fiber optic cables. Mounting in enclosures or industrial devices is typically performed via the integrated SFP interface of the host device.
Operational Advantages
The transceiver offers high reliability and long service life, ensured by verified manufacturer quality. The ability to operate at extreme temperatures reduces the need for active cooling and increases operational safety. The DDM function enables proactive network monitoring, allowing failures to be detected and resolved early. The simplex variant optimizes the use of fiber optic infrastructure, especially in environments where only one fiber is available.
The delivery includes a Fast Ethernet switch (depending on the selected variant) and an operating manual.
| General | |
| Data transfer rate | 155 Mbit/s |
| Transmission range | 40 km |
| Wavelength | 1310 nm |
| Connector | LC |
| Operation temperature | -40..+85 °C |
| Application range | industrial |
| Simplex variant | available |
| DDM | |
| SFP transceiver | |
| Fast Ethernet | |
Questions & answers
What is the delivery time of MICROSENS MS100192DX SFP FE Transceiver 155 Mbit/s FX SingleMode 1310 nm, 40 km, DDM, LC, -40..+85 °C?
The article MICROSENS MS100192DX SFP FE Transceiver 155 Mbit/s FX SingleMode 1310 nm, 40 km, DDM, LC, -40..+85 °C is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of MICROSENS MS100192DX to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you MICROSENS MS100192DX SFP FE Transceiver 155 Mbit/s FX SingleMode 1310 nm, 40 km, DDM, LC, -40..+85 °C always at the best possible price. We can give you a discount of 2% on MICROSENS MS100192DX SFP FE Transceiver 155 Mbit/s FX SingleMode 1310 nm, 40 km, DDM, LC, -40..+85 °C if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of MICROSENS MS100192DX SFP FE Transceiver 155 Mbit/s FX SingleMode 1310 nm, 40 km, DDM, LC, -40..+85 °C we can offer you a price of 143,01 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

