MICROSENS MS100192DX

MICROSENS MS100192DX SFP transceiver 155 Mbit/s SingleMode 1310 nm

Networks > Media-Converters

MICROSENS MS100192DX SFP transceiver 155 Mbit/s SingleMode 1310 nm

Lieske Part No. 1504627
Mfg Part No MS100192DX
EAN-Code
Manufacturer MICROSENS
Here only 146,30 EUR
174,10 EUR incl. VAT

Further information for MICROSENS MS100192DX SFP transceiver 155 Mbit/s SingleMode 1310 nm

General
Data transfer rate155 Mbit/s
Transmission range40 km
Wavelength1310 nm
ConnectorLC
Operation temperature-40..+85 °C
Application rangeindustrial
Simplex variantavailable
DDMYes
SFP transceiverYes
Fast EthernetYes
The MICROSENS MS100192DX is an industrial Fast Ethernet media converter designed for use in demanding environments. It enables the transmission of network data in the Fast Ethernet standard (100 Mbit/s) over fiber optic cables in single-mode operation. The transceiver is specifically designed for industrial applications where high reliability, long service life, and operation under extreme environmental conditions are required. It supports a data transmission rate of 155 Mbit/s, enabling the transmission of Ethernet data in the 100Base-FX standard. The range extends up to 40 km, making it suitable for long distances in factories, power supply networks, or transportation infrastructure.

Applications

The transceiver is used in industrial networks, particularly in automation technology, for controlling machines and systems, and in enclosures. It is designed for applications where high temperatures or mechanical stress occur, such as in manufacturing, rail transport, or power generation. The ability to operate at temperatures from -40 °C to +85 °C makes it suitable for use in fanless or passively cooled systems, where thermal stress from fans or active cooling should be avoided. Additionally, it is ideal for communication solutions where fiber optic infrastructure is limited, as it is also available in simplex variants that enable bidirectional data transmission over a single fiber optic cable.

Functions and Features in Detail

The transceiver features an LC connector, optimized for connection with single-mode fiber optic cables. The wavelength is 1310 nm, typical for single-mode applications and ensuring high signal quality over long distances. The integrated DDM function (Digital Diagnostic Monitoring) enables monitoring of operating parameters such as temperature, voltage, optical power, and signal quality. This is particularly useful for remote maintenance and fault diagnosis in decentralized networks. The simplex variant allows the use of a single fiber optic cable for bidirectional communication, offering advantages in limited fiber infrastructure without compromising network performance.

Technology Explained Simply

The transceiver operates in the Fast Ethernet standard, which defines a data rate of 100 Mbit/s. The specified transmission rate of 155 Mbit/s refers to the physical layer and enables the transmission of Ethernet data with sufficient buffer for protocol transitions and error correction. The use of single-mode fiber optic cable with a wavelength of 1310 nm ensures low attenuation and high bandwidth, enabling the 40 km range. The operating temperature range of -40 °C to +85 °C demonstrates the robustness of the device, which operates stably even under extreme environmental conditions. The DDM function provides continuous diagnostic data, which is important for network monitoring and maintenance.

Compatibility and Accessories

The transceiver is designed as an SFP module, making it usable in standard SFP slots of switches, routers, or other network devices. It is compatible with devices that support SFP transceivers in the Fast Ethernet standard. The simplex variant requires a special fiber cable designed for bidirectional transmission.

Mounting and Installation

The transceiver is installed in SFP slots of network devices, with mounting achieved by simply inserting the module. Installation requires no special tools, as the module mechanically fits into the slot. Cabling is done via LC connectors to single-mode fiber optic cables. Mounting in enclosures or industrial devices is typically performed via the integrated SFP interface of the host device.

Operational Advantages

The transceiver offers high reliability and long service life, ensured by verified manufacturer quality. The ability to operate at extreme temperatures reduces the need for active cooling and increases operational safety. The DDM function enables proactive network monitoring, allowing failures to be detected and resolved early. The simplex variant optimizes the use of fiber optic infrastructure, especially in environments where only one fiber is available.

The delivery includes a Fast Ethernet switch (depending on the selected variant) and an operating manual.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1504627
qrcode für MICROSENS MS100192DX SFP transceiver 155 Mbit/s SingleMode 1310 nm