H-covering profile (2 pieces), length: 2000mm, for covering the Zumtobel 3-phase / L3 + DALI power tracks and the SUPERSYSTEM integral power track light inserts (direct / indirect beam) as an H-channel profile, the top of the channel is used to accommodate the indirect beam light inserts, the light inserts are flush-mounted in the channel profile and enable a consistent appearance, material: aluminum, extruded, black powder-coated, for cutting to the desired length on site, simple tool-free installation using mounting clips, to be ordered separately (maximum every 500mm), tool-free pendulum installation of the SUPERSYSTEM INTEGRAL power track channel profile possible, dimensions: 2000x5x114 mm, weight: 2.33 kg, note: clips (black or white) and steel cables for pendulum suspension of the H-channel profile must be ordered separately! Note: For busbar systems with angle connectors, covering profiles with 45° mitre angles for the outside corners must be ordered separately or created on site. End plates for closing the H-channel profile ends and blind inserts for closing module openings can be ordered separately!
Lieske Part No.: 2091202

Mounting clips (5 pieces), for easy, tool-free installation of the U/H lamination profiles SUPERSYSTEM integral, clips made of polycarbonate (PC), black, tool-free installation, dimensions: 30x54x36 mm, weight: 0.03 kg, note: one mounting clip in the U/H lamination profile every 500 mm at most!
Lieske Part No.: 2091201

Suspension (set) consisting of: white suspension cover, steel rope: diameter 1.8 mm, length 2000 mm, Patentabhänger for stepless height adjustment, fastening the cover Patentabhängers or current rail side possible maximum tensile load: 20 kg Type: 60,280,061


Quantity: 1 unit.
Lieske Part No.: 193117

Suspension (set) consisting of: suspension cover black, steel wire: Diameter
, 8 mm, length 2 mm, Patentabhänger for stepless height adjustment, attachment of Patentabhängers cover or current rail side possible maximum tensile load: 2 kg Type: 6 28 62 Quantity:
ST.
Lieske Part No.: 853693

Steel cable suspension (set), consisting of: black suspension dome, steel cable: diameter 1.8 mm, length 5000 mm, patented hanger for stepless height adjustment, fastening of the patented hanger on the ceiling or conductor rail side possible, maximum tensile load: 20 kg
Lieske Part No.: 374131

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, white, note: can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966894

Wall mounting bracket for fixing Zumtobel spotlights in horizontally or vertically mounted Zumtobel power tracks, material: made of die-cast aluminum, black, Note: Can only be used in Zumtobel 3-phase power tracks in combination with Zumtobel 3CU/3CD adapters, cannot be used with spotlights with ADAPTER-TRACKBOX
Lieske Part No.: 966896

Pendulum tube, white, diameter 13.5 mm, length 2000 mm, pendulum tube can be shortened on site, installation by means of screw fastening, weight: 1.5 kg
Lieske Part No.: 2096174

Pendulum tube, copper-coloured, diameter 13.5 mm, length 2000 mm, pendulum tube can be shortened on site, installation by means of screw fastening, weight: 1.5 kg
Lieske Part No.: 2096175

Lieske Part No.: 322171

L3+DALI initial feed, black, protective conductor on the left, polarization nose on the right, plastic parts made of polycarbonate (PC), cable entry on the front and from the side of the rail back, maximum current load of the phase: 16A, installation dimensions: 68x34x34 mm, overall dimensions: 110x34x34 mm
Lieske Part No.: 967856

L3+DALI center feed, white, protective conductor on the right, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, maximum current load of the phase: 16A, installation dimensions: 102x33x33 mm, overall dimensions: 187x33x33 mm
Lieske Part No.: 966784

L3+DALI center feed, black, protective conductor on the right, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, maximum current load of the phase: 16A, installation dimensions: 102x33x33 mm, overall dimensions: 187x33x33 mm
Lieske Part No.: 966788

L3+DALI angle connector, white, protective conductor inside, polarization nose outside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 967849

L3+DALI angle connector, black, protective conductor inside, polarization nose outside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the rail back, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 480246

L3+DALI angle connector, white, protective conductor outside, polarization nose inside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 983473

L3+DALI angle connector, black, protective conductor outside, polarization nose inside, for mechanical and electrical connection of two power rails, for feeding two power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 68x68x34 mm, overall dimensions: 110x110x34 mm
Lieske Part No.: 967848

L3+DALI T-connector, white, protective conductor on the right and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 1438718

L3+DALI T-connector, black, protective conductor on the right and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 301950

L3+DALI T-connector, white, protective conductor on the left and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 1438717

L3+DALI T-connector, black, protective conductor on the left and outside, for the mechanical and electrical connection of three power rails, for feeding three power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x68x34 mm, overall dimensions: 187x110x34 mm
Lieske Part No.: 2095241

L3+DALI cross connector, white, for mechanical and electrical connection of four power rails, for feeding four power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x102x34 mm, overall dimensions: 187x187x34 mm
Lieske Part No.: 1320475

L3+DALI cross connector, black, for mechanical and electrical connection of four power rails, for feeding four power rails, plastic parts made of polycarbonate (PC), cable entry from the side of the back of the rail, installation dimensions: 102x102x34 mm, overall dimensions: 187x187x34 mm
Lieske Part No.: 968061

L3+DALI flexible connector, white, for electrical connection of two power rails, mounted at an angle of up to 180° (including protective conductor), plastic parts made of polycarbonate (PC), installation dimensions: 213x34x34 mm, overall dimensions: 297x34x34 mm
Lieske Part No.: 968059

L3+DALI flexible connector, black, for electrical connection of two power rails, mounted at an angle of up to 180° (including protective conductor), plastic parts made of polycarbonate (PC), installation dimensions: 213x34x34 mm, overall dimensions: 297x34x34 mm
Lieske Part No.: 968058

Decorative ring for PANOS infinity / evolution DA (R) 200 mm, silver anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.17 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095321

Decorative ring for PANOS infinity / evolution DA (R) 150 mm, anthracite anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.13 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095320

Decorative front frame for PANOS infinity / evolution Q 140 mm, silver, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.02 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095494

Decorative front frame for PANOS infinity / evolution Q 190 mm, silver, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.03 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095495

Decorative front frame for PANOS infinity / evolution Q 190 mm, anthracite, made of high-quality, UV-resistant polycarbonate, in aluminum look, tool-free installation, weight: 0.03 kg, Note: Not suitable for luminaires in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095496

Square surface-mounted housing in a classic design, 2-part housing: die-cast aluminum, painted white, upper housing section (including electrical connection) for ceiling mounting, lower housing section for accommodating PANOS infinity Q190 HF/HG/HM/HL (white cover ring version) and PANOS infinity/evolution Q190 H recessed luminaires, luminaire to be ordered separately, lower housing section is locked to the upper section using a spring lock, electrical connection: 5-pin plug connection terminal and cable for connection to the ballast unit, prepared for looping through, in combination with the surface-mounted housing, the PANOS infinity recessed luminaires achieve protection class IP20, dimensions: 227 x 227 x 206 mm, weight: 2.79 kg, note: surface-mounted housing not suitable in combination with attachment (IP54) and decorative rings, emergency light versions (NT3/E3D), for accommodating 'tunableWhite' recessed luminaires, as well as for luminaires with high luminous flux (50W), pendant mounting on request, illustration: surface-mounted housing including luminaire!
Lieske Part No.: 872986

Attachment, clear for PANOS infinity / evolution DA (R) 100 mm, to achieve protection class IP54 with PANOS infinity / evolution recessed luminaires in closed ceilings, dimensions: diameter 124 x 9 mm, weight: 0.05 kg Note: Not suitable for luminaires in a flush-mounted/trimless design and combination with surface-mounted housing! Note: Not in conjunction with black reflectors (BK) and not in conjunction with emergency lighting luminaires E3D!
Lieske Part No.: 372920

Decorative ring for PANOS infinity / evolution DA (R) 100 mm, silver anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.04 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095583

Planar ring for PANOS infinity DA (R) 200 mm, for flush installation of PANOS infinity recessed luminaires (flush version/trimless) in plaster ceilings, made of polycarbonate (PC), glass fibre reinforced white, perforated with plaster edge, dimensions: diameter 212 x 83 mm
Lieske Part No.: 872987

Attachment, clear for PANOS infinity / evolution Q 68 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 82 x 82 x 7 mm, weight: 0.02 kg Note: Not suitable for luminaires in flush/trimless design and combination with surface-mounted housing!
Lieske Part No.: 2095685

Attachment, clear for PANOS infinity / evolution Q 100 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 114 x 114 x 6 mm, weight: 0.02 kg Note: Not suitable for luminaires in a flush-mounted/trimless design and in combination with surface-mounted housing! Note: Not in conjunction with black reflectors (BK) and not in conjunction with emergency lighting luminaires E3D!
Lieske Part No.: 2095684

Planar ring for PANOS infinity DA (R) 68 mm, for flush-mounted installation of PANOS infinity recessed luminaires (flush-mounted/trimless version), made of aluminium, painted white, perforated with plastering edge, dimensions: diameter 82 x 41 mm
Lieske Part No.: 381360

Extension cable 5 m with plug/socket (2-pin), for connecting cable operating device and lighting unit
Lieske Part No.: 2095899

Concrete casting housing for DA 68 mm, for installing PANOS infinity / evolution R68 / DIAMO and VIVOII-SR recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 300 x 150 x 155 mm, weight: 1.6 kg, note: for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) must be ordered separately!
Lieske Part No.: 2089421

Concrete casting housing for DA 100 mm, for installing PANOS infinity / evolution R100 recessed luminaires and DIAMO Deep Source installation rings (1-way) including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure attachment to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 155 mm, weight: 2.2 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately! Note: Not in combination with PANOS infinity R100L/H/WW LED927-65/19W!
Lieske Part No.: 1348131

Concrete casting housing for DA 150 mm, for installing CREDOS, PANOS infinity / evolution R150 and PANOS infintiy E150 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 165 mm, weight: 2.1 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800825) to be ordered separately! Note: Not in combination with PANOS infinity R150WW LED927-65/19W!
Lieske Part No.: 1441104

Concrete casting housing for DA 140x140 mm, for installing PANOS infinity / evolution Q140 and PANOS infintiy Q140 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork via fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 500 x 200 x 155 mm, weight: 2.1 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately!
Lieske Part No.: 2089419

Concrete casting housing for DA 200 mm, for installing PANOS infinity / evolution R200 and PANOS infintiy E200 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork using fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 550 x 250 x 165 mm, weight: 2.5 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800825) to be ordered separately! Note: Not in conjunction with PANOS infinity R200WW LED927-65/29W and with PANOS infinity / evolution recessed luminaires with system output >32W!
Lieske Part No.: 1348272

Concrete casting housing for DA 190x190 mm, for installing PANOS infinity / evolution Q190 and PANOS infintiy Q190 tunableWhite recessed luminaires including ballast unit in concrete ceilings, compact housing made of sheet steel, housing ring and stabilizing feet made of stainless steel, thus use in exposed concrete ceilings possible (note maximum grain size), housing can be connected to the iron reinforcement and the formwork via fastening tabs, secure fastening to the on-site formwork by additional screwing of the housing, dimensions: 550 x 250 x 155 mm, weight: 2.5 kg, Note: Can also be used in combination with PANOS infinity / evolution emergency light variant (E3D), for fastening in the concrete plant for filigree / slab ceilings, accessories (clip set: 60800824) to be ordered separately!
Lieske Part No.: 2089420

Mounting clip set (25mm) for concrete casting housing R68, Q68, R100, Q100, Q140 and Q190, for attachment to the existing centering plate, guarantees a firm connection between the centering plate and the concrete casting housing when applied in the concrete plant
Lieske Part No.: 1348118

Mounting clip set (35mm) for concrete casting housing R150 or R200, for attachment to the existing centering plate, guarantees a firm connection between the centering plate and the concrete casting housing when applied in the concrete plant
Lieske Part No.: 1348202

Installation ring (1-way) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, ring made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the ring: diameter 160x68 mm, weight: 0.07 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 1348129

Installation frame (1-way, square) serves as a platform for flexible combination of the LED accent light module CARDAN evolution M, simple tool-free assembly of the module using a snap-in mechanism, frame made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 145, installation depth of the LED accent light module: 170 mm, external dimensions of the frame: 160x160x68 mm, weight: 0.09 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089464

Installation frame (2-way) serves as a platform for flexible combination of two LED accent light modules CARDAN evolution M, simple tool-free assembly of the modules using a snap-in mechanism, frame made of polycarbonate (PC), white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: 2x diameter 145, installation depth of the LED accent light modules: 170 mm, external dimensions of the frame: 320x160x68 mm, weight: 0.19 kg, Note: Simple intuitive disassembly of the LED light modules using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 1441124

Installation ring (1-way) serves as a platform for flexible combination of the LED accent light module CARDAN evolution L, simple tool-free assembly of the module using a snap-in mechanism, ring made of polycarbonate (PC), glass fiber reinforced white, tool-free assembly using anti-slip retaining springs for ceiling thicknesses 1-25 mm, ceiling cutout: diameter 225, installation depth of the LED accent light module: 270 mm, external dimensions of the ring: diameter 249x68 mm, weight: 0.14 kg, Note: Simple intuitive disassembly of the LED light module using an auxiliary tool (60800854), to be ordered separately!
Lieske Part No.: 2089457